+ Post new Ad
WILTON VISE JAWS FOR OLDER CHICAGO BULLETS, 9450/101033, & C 1, 4 1/2 " W X 1", US $515 – Picture 0
WILTON VISE JAWS FOR OLDER CHICAGO BULLETS, 9450/101033, & C 1, 4 1/2 " W X 1", US $515 – Picture 0

Wilton Vise Jaws For Older Chicago Bullets, 9450/101033, & C 1, 4 1/2 " W X 1"

US $515

  • Arlington Heights, Illinois, United States
  • Jun 17th
Open on mobile:
QR code
         These are new steel Jaws lightly serrated. I believe I had them heat treated but its been so long, I can't remember.  These jaws are 4 1/2"W X 1"H X 5/8"T. C-C is 2 3/8" and they are without the 5/16" cap screws or support pins. They will fit 9450's, 101033's and older C1's with the 1"H jaws.  Thanks for looking On Apr-15-16 at 08:38:10 PDT, seller added the following information:

Directions

Similar products from Grips & Tongs

HEINRICH 4" MILLING VISE - VIRTUALLY NEW

HEINRICH 4" MILLING VISE - VIRTUALLY NEW

  • Dartmouth, Nova Scotia, Canada
  • Jun 17th
3-Piece Set Used Machined Chick 4" Bi-Lock Machinable Aluminum Double Vise Jaws

3-Piece Set Used Machined Chick 4" Bi-Lock Machinable Aluminum Double Vise Jaws

  • Lorain, Ohio, United States
  • Jun 17th
WILTON BULLET BENCH MACHINIST VISE 3 1/2" JAWS 101020

WILTON BULLET BENCH MACHINIST VISE 3 1/2" JAWS 101020

  • Palm Harbor, Florida, United States
  • Jun 17th
Machinists Drill Press 3 1/2 Inch Angle Vise Tool & Die Makers Bench Vise

Machinists Drill Press 3 1/2 Inch Angle Vise Tool & Die Makers Bench Vise

  • Hampstead, North Carolina, United States
  • Jun 17th
Vintage Chas Parker 954 Fixed Vise 4" Jaws 8" Capacity 3.5" Depth Meriden CT USA

Vintage Chas Parker 954 Fixed Vise 4" Jaws 8" Capacity 3.5" Depth Meriden CT USA

  • Somerville, Ohio, United States
  • Jun 17th
Good Hand Jig Clamp HORIZONTAL HANDLE TOGGLE CLAMP GH-204-GB

Good Hand Jig Clamp HORIZONTAL HANDLE TOGGLE CLAMP GH-204-GB

  • Salem, Oregon, United States
  • Jun 17th
BRAND NEW SPRING & WASHERS FROM A CRAFTSMAN 4" BENCH VISE - 51854

BRAND NEW SPRING & WASHERS FROM A CRAFTSMAN 4" BENCH VISE - 51854

  • Dacula, Georgia, United States
  • Jun 17th
BRAND NEW SWIVEL BASE CENTER BOLT FROM A CRAFTSMAN 4" BENCH VISE - 51854

BRAND NEW SWIVEL BASE CENTER BOLT FROM A CRAFTSMAN 4" BENCH VISE - 51854

  • Dacula, Georgia, United States
  • Jun 17th
BRAND NEW MAIN VISE NUT FROM A CRAFTSMAN 4" BENCH VISE - 51854

BRAND NEW MAIN VISE NUT FROM A CRAFTSMAN 4" BENCH VISE - 51854

  • Dacula, Georgia, United States
  • Jun 17th
BRAND NEW SCREW AND HANDLE FROM A CRAFTSMAN 4" BENCH VISE - #51854

BRAND NEW SCREW AND HANDLE FROM A CRAFTSMAN 4" BENCH VISE - #51854

  • Dacula, Georgia, United States
  • Jun 17th
Kurt 4" Anglock Self Centering Vise 4902 Lbs Load Cap., Precision, SDC430,/HV4/R

Kurt 4" Anglock Self Centering Vise 4902 Lbs Load Cap., Precision, SDC430,/HV4/R

  • Saint Peters, Missouri, United States
  • Jun 17th
Pneumatic air Vice

Pneumatic air Vice

  • Bridgeport, Connecticut, United States
  • Jun 17th
3" Small Vise Pony

3" Small Vise Pony

  • Clinton, Ohio, United States
  • Jun 17th
KURT 6" VISE D60 Free delivery to N. Alabama

KURT 6" VISE D60 Free delivery to N. Alabama

  • Owens Cross Roads, Alabama, United States
  • Jun 17th
Kurt CNC Vise Milling Mill Double Lock

Kurt CNC Vise Milling Mill Double Lock

  • Lake Forest, California, United States
  • Jun 17th
Franklin 3" Bench Vise Tool Old Blacksmith Machinist Tool Buffalo NY Free Ship

Franklin 3" Bench Vise Tool Old Blacksmith Machinist Tool Buffalo NY Free Ship

  • Cornell, Illinois, United States
  • Jun 17th
6" vise (jaws not original to vise)

6" vise (jaws not original to vise)

  • Orange City, Florida, United States
  • Jun 17th
Mini Carving Vise Aluminum Bench Swivel Clamp On Bench Miniature Vises Sucker

Mini Carving Vise Aluminum Bench Swivel Clamp On Bench Miniature Vises Sucker

  • China, China
  • Jun 17th
Workshops Vunder Vise Woodworking Clamp System DRI

Workshops Vunder Vise Woodworking Clamp System DRI

  • Farmington, Missouri, United States
  • Jun 17th
Clip off of an Atlas 7B Metal Shaper Part # S7-142 machinist machine

Clip off of an Atlas 7B Metal Shaper Part # S7-142 machinist machine

  • Farmington, Missouri, United States
  • Jun 17th

People who viewed this item also vieved

MAGNETIC V BLOCK - VEE BLOCK 4" x 3" x 3.3/4" 90 Deg. V-Angle - HARDENED

MAGNETIC V BLOCK - VEE BLOCK 4" x 3" x 3.3/4" 90 Deg. V-Angle - HARDENED

  • DELHI, DELHI, India
  • Jan 30th
1.1/2" CAPACITY PRECISION STEEL V-BLOCK PAIR W. CLAMPS 1-1/4x1-1/4x1-5/8 - VEE

1.1/2" CAPACITY PRECISION STEEL V-BLOCK PAIR W. CLAMPS 1-1/4x1-1/4x1-5/8 - VEE

  • DELHI, DELHI, India
  • Jan 30th
Magnetic Transfer V-Block BRASS w/ STEEL Pins 2 V's Toolmaker FREE SHIPPING

Magnetic Transfer V-Block BRASS w/ STEEL Pins 2 V's Toolmaker FREE SHIPPING

  • Cranford, New Jersey, United States
  • Jan 30th
RITEN 17236, Concentric Interchangeable Live Center, 16J, Jarno Taper, USA,/LJ1/

RITEN 17236, Concentric Interchangeable Live Center, 16J, Jarno Taper, USA,/LJ1/

  • Saint Peters, Missouri, United States
  • Jan 30th
SUPER Precision Bison MT#3 Live Center No.7-565-103

SUPER Precision Bison MT#3 Live Center No.7-565-103

  • Columbus, Ohio, United States
  • Jan 30th
Riten #3MT CNC Dead Center 68103

Riten #3MT CNC Dead Center 68103

  • Lebanon, Tennessee, United States
  • Jan 30th
UNION 5" 3 Jaw Self-Centering Chuck Loc: E 4

UNION 5" 3 Jaw Self-Centering Chuck Loc: E 4

  • Oregon, Ohio, United States
  • Jan 30th
BUCK Chuck 5" 3 Jaw Self Centering #431

BUCK Chuck 5" 3 Jaw Self Centering #431

  • Oregon, Ohio, United States
  • Jan 30th
C25-ER16 100L Straight shank ER16 Collet Chuck CNC Milling Lathe tools new

C25-ER16 100L Straight shank ER16 Collet Chuck CNC Milling Lathe tools new

  • hongkong, Hong Kong
  • Jan 30th
C CLAMP - 4" No.44, CINCINNATI,OH. HARGRAVE.

C CLAMP - 4" No.44, CINCINNATI,OH. HARGRAVE.

  • Sedona, Arizona, United States
  • Jan 30th
C CLAMP WILTON -408 DEEP THROAT.

C CLAMP WILTON -408 DEEP THROAT.

  • Sedona, Arizona, United States
  • Jan 30th
C CLAMP - 6" No.44, CINCINNATI,OH. HARGRAVE.

C CLAMP - 6" No.44, CINCINNATI,OH. HARGRAVE.

  • Sedona, Arizona, United States
  • Jan 30th
KENNAMETAL TG100 COLLET CHUCK EXTENSIONS SS150TG100925 0460CF6

KENNAMETAL TG100 COLLET CHUCK EXTENSIONS SS150TG100925 0460CF6

  • Wadley, Alabama, United States
  • Jan 30th
VALENITE BT30 ER32 COLLET CHUCK

VALENITE BT30 ER32 COLLET CHUCK

  • Wadley, Alabama, United States
  • Jan 30th
CRAFTSMAN STUBBY CHUCK 3&1/4" LONG ER16 3/4" SHANK STRAIGHT COLLET EXTENSION

CRAFTSMAN STUBBY CHUCK 3&1/4" LONG ER16 3/4" SHANK STRAIGHT COLLET EXTENSION

  • Fort Myers, Florida, United States
  • Jan 30th
JACOBS RUBBER FLEX COLLETS, J420 .176" - .320 AND J421 .139" - .257"

JACOBS RUBBER FLEX COLLETS, J420 .176" - .320 AND J421 .139" - .257"

  • Hopkins, Minnesota, United States
  • Jan 30th
CNC SWISS EXPANDABLE S&M #42 DOUBLE CONE GUIDE BUSHING

CNC SWISS EXPANDABLE S&M #42 DOUBLE CONE GUIDE BUSHING

  • Baldwin Park, California, United States
  • Jan 30th
spanner wrench for thread protectors / collets for 16in s/bend and other lathes

spanner wrench for thread protectors / collets for 16in s/bend and other lathes

  • Plantsville, Connecticut, United States
  • Jan 30th
Eclipse No. 934 Magnetic V Block, 2-3/4"W x 3-3/4"L x 4"H Sheffield, England

Eclipse No. 934 Magnetic V Block, 2-3/4"W x 3-3/4"L x 4"H Sheffield, England

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Pair of Angle Plates 14"x66", 3-3/4" Thickness, (3) Vertical T-Slots (25822)

Pair of Angle Plates 14"x66", 3-3/4" Thickness, (3) Vertical T-Slots (25822)

  • Cincinnati, Ohio, United States
  • Jan 30th
Angle Plate, 14"x 66", 4" Thickness, 14"Wx30-3/4"D, (3) Vertical T-Slots (25829)

Angle Plate, 14"x 66", 4" Thickness, 14"Wx30-3/4"D, (3) Vertical T-Slots (25829)

  • Cincinnati, Ohio, United States
  • Jan 30th
Earth-Chain Lifting Magnet ELM-300 Capacity: 660 lbs (300 kgf)

Earth-Chain Lifting Magnet ELM-300 Capacity: 660 lbs (300 kgf)

  • Chesapeake, Virginia, United States
  • Jan 30th
HITACHI MAGNETIC CHUCK - 10" x 30" SEMI-FINE TO FINE POLE

HITACHI MAGNETIC CHUCK - 10" x 30" SEMI-FINE TO FINE POLE

  • Wellington, Ohio, United States
  • Jan 30th
Hardinge 21A 11AA 11AM feed fingers LOT

Hardinge 21A 11AA 11AM feed fingers LOT

  • Seattle, Washington, United States
  • Jan 30th
ELLIS INDEXING DIVIDING HEAD 3 COLLETS & DRAW BAR 1 PLATE

ELLIS INDEXING DIVIDING HEAD 3 COLLETS & DRAW BAR 1 PLATE

  • Burlington, Connecticut, United States
  • Jan 30th
Trunnion table for Haas 4th axis 5C rotary indexer table, fits Haas 5c indexer

Trunnion table for Haas 4th axis 5C rotary indexer table, fits Haas 5c indexer

  • Santa Clarita, California, United States
  • Jan 30th
ELLIS INDEXING HEAD ROTATION BASE 360 DEGREES

ELLIS INDEXING HEAD ROTATION BASE 360 DEGREES

  • Burlington, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies