+ Post new Ad
Wood's Vacuum lifter Manual Tilt 1200 Pound capacity Model MT8AIR, US $3,323.00 – Picture 0
Wood's Vacuum lifter Manual Tilt 1200 Pound capacity Model MT8AIR, US $3,323.00 – Picture 0

Wood's Vacuum Lifter Manual Tilt 1200 Pound Capacity Model Mt8air

US $3,323.00

  • Laurel, Montana, United States
  • Jan 30th
Open on mobile:
QR code
  Wood's Model MT8AIRS Designed to fit between tight, vertical storage racks, these Powr-Grip® vacuum lifters can handle stone and other high-density materials with rough surfaces or irregular shapes. Standard Vacuum Pad Spread: 21" x 77" [532 x 1956 mm]  Number / Size of Vacuum Pads: 8 / 10" [25 cm] dia. lipped vacuum pads  Load Capacity: 1200 lbs [545 kg] (On smooth, nonporous surfaces. Weight of Vacuum Lifter:  104 lbs [48 kg] without power system  Load Movement:  Manual tilt, 90° between upright and flat Standard Features: Individual shutoffs to all vacuum pads ,Closed cell foam vacuum pad rings ,Spring-mounted vacuum pads ,Vacuum gauge ,Vacuum line filter ,Nylon slings FREE SHIPPING APPLIES TO LOWER 48 STATES ONLY DUE TO VERY HIGH DEMAND, This unit is drop shipped from the factory and may require up to 8-10 weeks for delivery.  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Wood's
Country of Manufacture United States

Directions

Similar products from Other Woodworking Equipment & Machines

Delta Classic Unisaw, 10" 3HP 220V Single Phase

Delta Classic Unisaw, 10" 3HP 220V Single Phase

  • York, Pennsylvania, United States
  • Jan 30th
NEW WINPAK 122004 STEEL SUPPORT ARM BLOCK ASSEMBLY B325895

NEW WINPAK 122004 STEEL SUPPORT ARM BLOCK ASSEMBLY B325895

  • Buffalo, New York, United States
  • Jan 30th
Northtech NT20153 Shaper, 440 V, 3 PH, 5 HP

Northtech NT20153 Shaper, 440 V, 3 PH, 5 HP

  • Sheboygan, Wisconsin, United States
  • Jan 30th
NEW WINPAK 187012 STAINLESS SUPPORT CROSS BAR 19X1/2X1IN ASSEMBLY B326022

NEW WINPAK 187012 STAINLESS SUPPORT CROSS BAR 19X1/2X1IN ASSEMBLY B326022

  • Buffalo, New York, United States
  • Jan 30th
Stainless Steel SS Cyclone 19' With 12" x 33" Inlet

Stainless Steel SS Cyclone 19' With 12" x 33" Inlet

  • Island Falls, Maine, United States
  • Jan 30th
Fuji Dust Collector System (Fuji FR-504HFKS and Fuji FV-300R-3MLK)

Fuji Dust Collector System (Fuji FR-504HFKS and Fuji FV-300R-3MLK)

  • San Jose, California, United States
  • Jan 30th
Delmac (DMG) 62 CT Contour Bander Trimmer, 230 V, Single Phase

Delmac (DMG) 62 CT Contour Bander Trimmer, 230 V, Single Phase

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Delmac (DMG) 60 CB Contour Edgebander

Delmac (DMG) 60 CB Contour Edgebander

  • Sheboygan, Wisconsin, United States
  • Jan 30th
POWERMATIC SINGLE 2A END TENONER

POWERMATIC SINGLE 2A END TENONER

  • Belleville, Illinois, United States
  • Jan 30th
Powermatic 26 & 27 wrench for the 1" spindle also Powermatic 66 saw etc.

Powermatic 26 & 27 wrench for the 1" spindle also Powermatic 66 saw etc.

  • Alpharetta, Georgia, United States
  • Jan 30th
**FREE BITS** Conquest Standard 13 Line Borer Pneumatic 230V/1PH W/Hinge Unit

**FREE BITS** Conquest Standard 13 Line Borer Pneumatic 230V/1PH W/Hinge Unit

  • Bonita Springs, Florida, United States
  • Jan 30th
**FREE BITS** Conquest Construction Drill, 23 Spindle

**FREE BITS** Conquest Construction Drill, 23 Spindle

  • Bonita Springs, Florida, United States
  • Jan 30th
Lot of 6 SCM Upper Dust Hoods for Double End Tenoner

Lot of 6 SCM Upper Dust Hoods for Double End Tenoner

  • Unionville, Pennsylvania, United States
  • Jan 30th
AERCOLOGY WELD AIR PORTABLE AIR CLEANER WV-4000C

AERCOLOGY WELD AIR PORTABLE AIR CLEANER WV-4000C

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Hoffmann MU2-P Pneu. Bench-Top Machine with Custom Table

Hoffmann MU2-P Pneu. Bench-Top Machine with Custom Table

  • South San Francisco, California, United States
  • Jan 30th
Ritter R700 Sander with tilting worktables

Ritter R700 Sander with tilting worktables

  • Millville, New Jersey, United States
  • Jan 30th
ROCKWELL-INVICTA RS-15 RS15 43780 INDUSTRIAL SHAPER ***ONTARIO, CALIF*** *DELTA*

ROCKWELL-INVICTA RS-15 RS15 43780 INDUSTRIAL SHAPER ***ONTARIO, CALIF*** *DELTA*

  • Ontario, California, United States
  • Jan 30th
Powematic 26 Shaper 5 Hp

Powematic 26 Shaper 5 Hp

  • Piedmont, South Carolina, United States
  • Jan 30th
Forward Reversing Switch

Forward Reversing Switch

  • Ogden, Utah, United States
  • Jan 30th
Clausing Lathe 5900 Series Crossslide Screw Assembly - With Gib / Complete

Clausing Lathe 5900 Series Crossslide Screw Assembly - With Gib / Complete

  • Frankfort, Kentucky, United States
  • Jan 30th

People who viewed this item also vieved

Delta Rockwell Radial Arm Saw 14”16”18” Model No,33-400 Guard Clamp/Stud Parts

Delta Rockwell Radial Arm Saw 14”16”18” Model No,33-400 Guard Clamp/Stud Parts

  • Midwest, USA, United States
  • May 29th
Wood-Mizer LTAGA Automatic Sharpener Portable Sawmill Bandsaw Operators Manual

Wood-Mizer LTAGA Automatic Sharpener Portable Sawmill Bandsaw Operators Manual

  • Woodbridge, Virginia, United States
  • May 30th
Wood-Mizer LTTSG Tooth Setting Guage Portable Sawmill Bandsaw Operators Manual

Wood-Mizer LTTSG Tooth Setting Guage Portable Sawmill Bandsaw Operators Manual

  • Woodbridge, Virginia, United States
  • May 30th
New Norton NOR62328 Norton Blaze 36 Grit Speed-LOK TR Discs

New Norton NOR62328 Norton Blaze 36 Grit Speed-LOK TR Discs

  • Charlotte, North Carolina, United States
  • Jun 1st
Heavy Duty Plate Joiner Kit

Heavy Duty Plate Joiner Kit

  • Lindenhurst, New York, United States
  • Jun 1st
POWERMATIC 6" X 48" BELT SANDER w/12"DISC Model 30A / 3 Phase

POWERMATIC 6" X 48" BELT SANDER w/12"DISC Model 30A / 3 Phase

  • Edison, New Jersey, United States
  • Jun 1st
Buffalo Drill Press No.18

Buffalo Drill Press No.18

  • Brooklyn, New York, United States
  • Jun 4th
Delta/Rockwell 15" Drill Press - Column Base - Column Size is 2 3/4" Dia.

Delta/Rockwell 15" Drill Press - Column Base - Column Size is 2 3/4" Dia.

  • Grand Rapids, Michigan, United States
  • Jun 4th
ELECTRO-VULC MARK I MOLD VULCANIZER HAECHTEL PRESS JEWELRY ~GUARANTEED WORKING!!

ELECTRO-VULC MARK I MOLD VULCANIZER HAECHTEL PRESS JEWELRY ~GUARANTEED WORKING!!

  • Canoga Park, California, United States
  • Jun 5th
3D STL Model for CNC Router Engraver Machine Relief Artcam #GTA5

3D STL Model for CNC Router Engraver Machine Relief Artcam #GTA5

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 16th
Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0113

Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0113

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 16th
Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0095

Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0095

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 16th
Centauro T4-1600 Copy Lathe w/ AG-125 Tool Grinder

Centauro T4-1600 Copy Lathe w/ AG-125 Tool Grinder

  • Stone Mountain, Georgia, United States
  • Oct 24th
Used wood lathe (cuemakers)

Used wood lathe (cuemakers)

  • El Paso, Texas, United States
  • Oct 24th
New NOVA CHUCK INSERT 5/8" PLAIN BORE CODE: IFNS

New NOVA CHUCK INSERT 5/8" PLAIN BORE CODE: IFNS

  • Alpharetta, Georgia, United States
  • Oct 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies