Wood Veneer Zebrawood 48x120 1pcs Total 10mil Paper Backed "exotic" 588.4

US $116.00

  • Jeffersonville, Indiana, United States
  • Jan 30th
Please note that the color in the pictures has been adjusted to best represent the product. Backed products have one side with a glue substance and the other with paper. For the non-glued side, we recommend researching the best bonding agent. For raw veneer or un-backed products, we suggest seeking advice online for the best way to handle them. Most conventional finishing products can be used with correctly applied veneer. Minor splits or tears may be present, but these can usually be repaired without impacting quality. There may also be some minor wood filler used to fill cracks and other crevices. Sanding is usually required before finishing to prepare the surface. All measurements are in inches and shipping can be combined for multiple auctions. Raw veneer may have some splits at the end. This lot of Wood Veneer Zebrawood measures 48x120 inches and comes in 1 piece, with a total of Xpcs included. The code "EXOTIC" after the description refers to our inventory system. Other sizes and backed veneer variations may also be available. These 10mil glue paper backed sheets can be sanded and inspected for a small fee. Thickness may not always be exact, but is typically about 1/40" for paper-backed veneers, 1/25" for wood-backed veneers, and 1/32"-1/42" for raw plain veneer. Use a razor or box knife with a straight edge to cut. Paper-backed and wood-backed veneers should be applied with contact cement and raw plain veneer should be applied with white or yellow wood glue.

Directions

Similar products from Industrial Wood & Interline

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies