XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 0

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 1

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 2

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 3

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 4

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 5

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 6

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 7

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 8

XRAY MARKER ADHESIVE - 3 SETS RADGRIPS / GECKO STRIPS, US $6.60 – Picture 9

Xray Marker Adhesive - 3 Sets Radgrips / Gecko Strips

US $6.60

Fort Lauderdale, Florida, United States
Jan 30th

Open on mobile:
QR code

Tired of the mess and residue that tape leaves on X-Ray markers, badges, cassettes, and wall buckies??? The answer is here!!!!! NEW Resuable RADGRIPS!!!! Not like other imposters that use sticky puddy not designed for X-ray markers, RADmarkers RADGRIPS are designed for X-ray markers for the Radiology Industry! The RADGRIPS measures 1 1/2 x 3/4 and fit all plastic X-ray markers. These RADGRIPS can be cut to different sizes if need to fit custom shape X-ray markers. These RADGRIPS leave no sticky residue!!! To use simply peel off the protective film apply to back of x-ray marker, press firmly to adhere to marker. Peel off second protective film and it is ready to stick to x-ray cassette, badge, Bucky, wherever your X-ray marker is needed. If the RADGRIPS loses its stickiness, simply rub your finger over strip while rinsing with HOT water and air dry to restore RADGRIPS full tackiness. That's it!!!!! 1 set (two 1 1/2 x 3/4 strips) should last for months and months of normal use. Show off your markers and avoid the mess that tape leaves behind and purchase a set of RADmarkers RADGRIPS today!!!!! DON'T FORGET TO ORDER YOUR RADmarkers!!! Helpful Tips for your RADGRIPS 1. For best results apply RADGRIPS to clean, residue free flat surface. Oils,fluids, and residue can cause Strips to not adhere properly. 2. RADGRIPS should never be larger than marker or overhang. This can cause an air gap and the RADGRIPS will not adhere properly. RADGRIPS can be cut to fit most markers. For best results, Remove bubbles trapped between RADGRIPS and marker by pressing firmly on strip from center out toward the edge of the strip. 3. Some marker company's engrave the back of their markers. The impression from being engraved can cause and air gap which prevents the RADGRIPS to not adhere properly. 4. Alcohol based cleaners and hand lotions/creams can shorten RADGRIPS life and inhibit the sticking ability. 5. Wash the RADGRIPS with hot water. While washing RADGRIPS Strip/marker rub your finger in a circular motion to remove any debris (IE: lint, dust, dirt) that may inhibit he full potential of the RADGRIPS. 6. For best results air dry RADGRIPS (about 1-3 minutes). Pat drying strips will work but lint can cause strips to not stick to its full potential. 7. Gecko strips will adhere to aluminum markers, but if scratches or imperfections are present air and water may seep through these imperfections and cause the RADGRIPS to not adhere properly. 8. RADGRIPS can be interchanged to any marker. Just peel off old marker and apply to new marker. That 's it!! ****X-ray markers will fit in table and wall buckies with RADGRIPS attached. ****Alcohol based products and hand lotions may short life of RADGRIPS, and not Recommended. ****** RADGRIPS can work on aluminum markers however they are not recommended as too many variables can contribute to the RADGRIPS not adhering to the aluminum properly.