Yeeco DC DC Voltage Regulator 5-36V to 1.25-32V Buck Converter Step Down ... New, US $140 – Picture 0

Yeeco DC DC Voltage Regulator 5-36V to 1.25-32V Buck Converter Step Down ... New, US $140 – Picture 1

Yeeco Dc Dc Voltage Regulator 5-36v To 1.25-32v Buck Converter Step Down ... New

US $140

US, United States
Nov 13th

Open on mobile:
QR code

Yeeco DC DC Voltage Regulator 5-36V to 1.25-32V Buck Converter Step Down Power Supply Trandformer Constant Voltage & Current Adjustable Power Volt Stabilizer with Amp volt LED Display USB Output Product Details Size: red LED USB output with shell Brand: Yeeco Item Weight: 0.3 ounces Product Dimensions: 3.2 x 2.8 x 0.3 inches Item model number: 1500248 Shipping Weight: 0.3 ounces Date First Available: September 12, 2015 Output voltage :1.25-32V continuously adjustable,default output 17V. Output Current : 5A MAX( Please use it within 4.5A) Input voltage:DC5-36V ;Output voltage:DC1.25-32V (Continuously adjustable) 36V to 24V 12V 5V 3.3V 3V Without Input reverse polarity protection, meaning meter will burn when connected reversely Use as battery charger,high power constant current LED drive module,normal Step-down modules with over current protection capability Short circuit protection ,Over temperature protection;Output is more than 3A/35W, please enhance heat dissipation Size:red LED USB output with shell Parameters: Input voltage:DC 5-36V Output voltage:DC 1.25-32V (Continuously adjustable) Output current: adjustable, 5A Max(please use it within 4.5A) Output power: 75W Max(please use it within 50W, if the pressure difference is big,please reduce power) Working frequency: 180KHz Conversion efficiency: Up to 96% Working temperature:-40°C - +85°C Installation: 4pcs 3mm screws Module dimensions: L 68.2mmW 38.8mm H 15mm description: Short circuit protection : Yes Over temperature : Yes (automatically shut off the output after over temperature) Input reverse polarity protection: No(if necessary, please in input String into high current diode) Wiring: terminal block or solder terminals, V-IN is the input, V-OUT is output Usage: Use as a battery charger Use as high power constant current LED drive module. Use as a normal Step-down modules with over current protection capability. Note: 1. Because the factory default output voltage is 17V. If the module can not be adjusted, the output voltage is always equal to the input voltage.When you encounter this problem, counterclockwise rotation of the potentiometer 10 laps or more, by doing this you can adjust the output voltage. 2.Because of Module output terminal string has a current sampling resistor, it is a normal phenomenon that there will be 0-0.2V voltage drop after connected to the load. 3.When its output is more than 3A/35W, please enhance heat dissipation! 4.This DC converter is single output, the output voltage of the USB port is the same as the output voltage of the module, if your load is USB device, please make sure the module's output voltage is set at 5V. Packing including: 1 x Buck Converter