0-2000 Mkvb 1% Micro Flux Meter Veber Meter F191 An-g. Agilent

US $2,190.00

Lviv, Europe, Ukraine
Jan 29th

Open on mobile:
QR code

Micro flux meter F191 , analog of Lutron, Advantest, Avtech, HP Agilent, NoiseCom, General Radio, Boonton, Anritsu, Fluke and general Electric, but has the same or better characteristics. This device can be used for wide measurement range. Is designed to measure small permanent magnetic flux and induction in air magnetic circuits gap. Measuring range: 0-2000mkVb Accuracy: 1% Micro flux meter F191 is designed to measure small permanent magnetic flux and induction in air magnetic circuits gap. Micro flux meter F191 is designed to operate in dry closed and heated rooms at an ambient temperature of 10 ° to 35 ° C and relative humidity of 80% at 25 ° C (group 2 GOST 22261-76). To operate in tropical climate in temperature range of 10 to 25 ° C and relative humidity of 80% at 25 ° C micro flux meter F191 04.1 is used (version 0, category 4.1 GOST 15150-60). Micro flux meter F191 consists of blocks: photo galvanometric amplifier F191 / F; control F191 / Y. Condition: NEW (not used, an old stock). Tested and 100% workable. If necessary, we can provide calibration certificate from Government standardization institute (+145-265usd). Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Please take a look on my other items! If you haven’t found the needed item in my listing, please contact me. I’ll try to help you. Technical characteristics of devices micro flux meter F191 : Measurement range, acceptable basic error limit, circuit resistance measurement, pointer sliding time are shown in table 1. Table 1 Measurement range, mkVb Acceptable basic error limit, % Circuit resistance measurement, Ohm, not more than Pointer sliding time at 1 division, s, not less than 2-0-2mkVb ±2.5 100 10 5-0-5 mkVb ±1.0 100 15 10-0-10 mkVb ±1.0 150 20 20-0-20 mkVb +1.0 150 30 50-0-50 mkVb ±1.0 300 60 100-0-100 mkVb ±1.0 300 60 200-0-200 mkVb ±1.0 500 60 500-0-500 mkVb +1.0 500 80 1000-0-1000 mkVb ±1.0 1000 80 2000-0-2000 mkVb ±1.0 1000 80 Basic error is expressed as a percentage of full scale range. Acceptable additional error of micro flux meter F191 caused by change in control unit position from normal position at 5 ° in any direction is equal to acceptable basic error limit. In this case unit corrector provides pointer return to zero scale point. Micro flux meter acceptable additional error limit caused by deviation from ambient temperature (20 ± 5) ° C to any temperature within specified operating conditions, is equal to acceptable basic error limit for each 10 ° C temperature change. Micro flux meter acceptable additional error limit caused by voltage supply deviation from normal values at ± 10%, is equal to half of acceptable basic error limit. Micro flux meter F191 operation mode setup time does not exceed 30 minutes. Micro flux meter F191 continuous operating time is at least 8 hours per day. Micro flux meter F191 acceptable additional error limit under influence of uniform static magnetic field with induction of 0.5 mT is equal to ± 2.5% for measurements range 2-0-2 mkVb and ± 1% for other ranges. Insulation between supply circuit and micro flux meter F191 case stands for 1minute voltage 1.5 kV frequency 50 Hz under normal using conditions. Insulation resistance between supply circuit and case is not less than 20 MOhm under normal using conditions. Micro flux meter F191 power is single-phase AC power (220 ± 22) V, frequency (50 ± 1) Hz. Power consumption is not more than 30 VA. Micro flux meter F191 Dimensions photo galvanometric amplifier F191 / F - 298x184x196 mm, control unit F191 / Y 317x150x345 mm. Weight: device F191 / F - not more than 5.5 kg, F191 / Y unit - not more than 7 kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact, that this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. (depends on device, usually it takes 3 days.). I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012, but the price of such device will be approximately 20-40% higher or more. This device also can be named as: F191, F-191, F 191, ?191 , ?-191 , ? 191 . Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in, feel free to contact me. I will look through the technical documentation for the device and I will be happy to consult you. Also I may speak directly with the manufacturer and find out more specific information about this product. If some technical parameters for the device (error, accuracy, measuring range, operating voltage and frequency) do not meet your requirements, please, e-mail me and I will negotiate with the manufacturer whether it is possible to deliver you a device on the desired specifications without a cost increase and in the shortest time. On delivering the device, electric circuit diagrams and all technical documentation for operation, calibration and maintenance will be supplied. Also there will be documents that testify the accuracy and compliance with specifications. In addition, translation of technical documentation into the customer’s language may be discussed. Delivery set On delivering the device will be completely ready for use. There are all necessary cables, adapters, sensors and spare parts as envisaged in technical documentation. Hence, there is no point in purchasing any additional repair & measurement equipment. Warranty Warranty of this item - 12 month. Before sending a device, all devices are checked whether they comply with all technical specifications. Highly qualified metrology engineers carry out the check-up of every instrument at a specialized laboratory and with the help of master gages. If necessary, we can send you photos or video with the check-up process. I ship only fully working devices complying with all parameters. The warranty for this device is 1 year from the date of shipment from my warehouse. Within 1 year term I will provide the repair of the device for free in case of manufacturing defect or when the technical parameters do not comply with technical documentation. You will have to pay only for delivery. When a device is out of order due to your fault (its fall, it is flooded with water, the power supply does not meet the specified technical requirements, input signals exceed the norm, etc.) or there are conspicuous marks of casing opening (broken warranty labels), it is considered a non-warranty repair. Within 1 year term we can advise you for free on the device operation. After-warranty service After warranty termination I can arrange a paid repair and technical maintenance of a device as well as I can sell you all necessary spare parts for repair at minimum prices. I always have them in stock. Packaging Immediately after checking, the device will be wrapped in several layers of strong air-bubble film and placed into a strong cardboard box. Extra cardboard plates will be used for fixation. If necessary, wooden box or pallet may be used. For a more reliable fixation foam can be applied. The whole box will be placed in a waterproof polyethylene bag which will be wound with several layers of packing tape. A special handle will be made for ease of transportation. Thus, I guarantee qualitative and conscientious packing of the device that reduces to minimum the possibility of damage during transportation. Discount (from-10% to -90%) I suggest you a device which is unique in its class and price category with the following specifications: (accuracy, measurement range, error, temperature operating conditions), endurance and durability (military performance, aluminum, stainless steel, titanium or carbolite casing, shock and vibration resistance, high maintainability and reliability), free measuring kit (cables, adapters, load, fuses, etc.), 1year warranty. Unused cheap devices with the same specifications, accuracy and durability do not exist. If you consider the price for this device unreasonably high, and you know the similar equipment at a lower price, please, let me know. I will help you to compare these two models. In case your model (which is cheaper) is the same as the device I suggest or even it is better, then I guarantee to sell you a unit at that cheaper price with additional 10% discount. Shipping details: Please, mind that I ship from Ukraine (Europe, +2), so that the shipping time may differ from your local time. I send goods via AirMailpost. App. delivery time : Europe – 7-15 days; USA, Japan&others – 10-2days (depends on a country). I will ship in 2-3 business days after payment clearance. The goods may also be delivered by the express mail services such as DHL, UPS, FedEx, TNT or EMS. With express delivery you will mostly receive your goods within 3-7 working days. Payment details: I expect payment in 4 days after the auction ends. I accept a PayPal payment as the safest way of payment (preferably). If you do not have a PayPal account you can pay by wire transfer to my credit card. Other variants of payment are acceptable, for example in case of pickup way of shipping, i can accept cash payment. (This will be an official purchase on eBay). Please, tell me if you cannot pay in time, we can always negotiate it. When purchasing a few items, you’ll save on shipping. Return policy: I accept refunds and returns. If there is something wrong with the device, please, inform me within 5 days after receiving it. I will refund your costs or send you the other item, as you wish (after I receive the previous item). Please only serious bidders!

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	Brand	F191
MPN	F191
Model	F191