0-6 Second Spot Welding Timer 7.2kva/240v, 3.6kva/115v Kit

US $694

Gaffney, South Carolina, United States
Nov 7th

Open on mobile:
QR code

0-6 Second Spot Welding Timer KIT 7.2KVA/240V, 3.6KVA/115V (main PCB with wire) 0-6 Second Spot Welding Timer KIT 7.2KVA/230V,3.6KVA/115V (main PCB with control wire) When I sold it, I will set up for your requested voltage. Should be request ! If no request should be setting to 115V. 0 ~ 6 second timers, primary power 115V or 230V (by select jumper), power indicator You should use your control box or separate box and breaker. (show at the sample picture) How to use; 1 Connect your spot welder after Spot Welding Timer controlled Magnet contactor(Spot welder power turn on state)--- it is state of SWT timer controlled 2 Set up time by potentiometer (0 – 6 second) 3 Check power indicator on (LED indicator on) 4 Clump on welding items by Spot welder 5 Push on Timer Start Switch (red LED indicator on) How to change supply power 230V/115V ;( when ship 115V setting) 115V setting ---use two jumper at side of A and C(remove one 230V jumper) Power wire connect to terminal #1 & #2 230V setting ---use one jumper at center of jumper B(remove two 115V jumper) Power wire connect to quick disconnect(TAB) connector Included: Power indicator, Welding indicator, Timer start switch, Potentiometers, Main board, 7-wires, Suppressor with magnet contactor. 0 ~6 second label sign, Potentiometer with knob, Spot Welding Timer Sign. (2)230V power supply wire for PCB, (4)Teflon 3mm screw with spacer, Instruction Not included: Breaker 30A, 230V,2pole 250V5A Fuse holder and 250V0.5A fuse, 250V5A Control Switch Main power wiring supply & secondary 230V or 115V output receptacle Enclosure box Extra ; Switch hand box ------------------------------------------------------------------------------------------------ INSTRUCTION for Spot Welding Timer Kit Part included; Power indicator, Welding indicator, Timer start switch, Potentiometers, Main board, 7-wires, Suppressor and ferrite core with magnet contactor. 0 ~6 second label sign, Potentiometer with knob, Spot Welding Timer Sign. (2)230V power supply wire for PCB, (4)Teflon 3mm screw with spacer, Instruction Not included; Breaker 30A, 230V/240V, 2pole 250V5A Fuse holder and 250V0.5A fuse, 250V5A Control Switch Main power wiring (supply & secondary) 230V or 115V receptacle for welder(or direct connect) Enclosure box Super Glue 3mm tap, 2.6mm drill, screw driver, (install PCB) 4mm tap, 3.6mm drill, 4mm screw (install MC) 5mm, 6.2mm, and 6.8mm drill (front of panel) Extra, Switch hand box Output Receptacle or Cable --------------------------------------------------- On Apr-06-16 at 11:10:24 PDT, seller added the following information: