+ Post new Ad
.0465" - #56 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Models Hobby, US $4.49 – Picture 0
.0465" - #56 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Models Hobby, US $4.49 – Picture 0

.0465" - #56 - 1/8" Shank Carbide Drill Bits Five Pcs Cnc Dremel Models Hobby

US $4.49

  • Monroeville, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
The flute length is approximately 0.430". These super tough tungsten carbide tools are from top names in the industry, including Union Tool and Kyocera. Thank you for your interest in these carbide drill bits! These solid carbide drill bits are a super value for your modeling, prototyping and light industrial applications! With a cutting diameter of .0465", these bits have a shank diameter of 1/8" (.125") and an overall length of 1.50". It's important to use high quality rotary equipment (CNC, Dremel tool, low vibration drill press, etc.) to avoid exaggerated vibration and drill wobble that can cause drill tip to skip off surface, resulting in tool breakage. These drill bits have an unsurpassed tool life, even in the toughest materials like aluminum, copper, PCBs, fiberglass, plastics, and wood. The 1/8" shaft fits most rotary equipment for easy use.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Very Lightly Used. Used to produce military grade Circuit Boards which have strict quality and dimensional tolerances and removed from service long before any wear was noticeable.”

Directions

Similar products from Solid Carbide Drill Bits

.067" - #51 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.067" - #51 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.081" - 2.05mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.081" - 2.05mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.071" - 1.80mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.071" - 1.80mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.070" - #50 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.070" - #50 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.065" - 1.65mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.065" - 1.65mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.073" - 1.85mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.073" - 1.85mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.089" - 2.25mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.089" - 2.25mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.069" - 1.75mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.069" - 1.75mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
1/16" - 1.60mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

1/16" - 1.60mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.041" - 1.05mm #59 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

.041" - 1.05mm #59 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.0595" - 1.50mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.0595" - 1.50mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.047" - 1.20mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.047" - 1.20mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.038" - #62 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby Jewelry

.038" - #62 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby Jewelry

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.043" - 1.10mm #57 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

.043" - 1.10mm #57 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.045" 1.15mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Models Hobby

.045" 1.15mm - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Models Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.057" - 1.45mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

.057" - 1.45mm 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Model Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
1.00mm -.039" - #61 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

1.00mm -.039" - #61 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.036" - #64 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Jewelry Hobby

.036" - #64 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Jewelry Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.040" - #60 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby Jewelry

.040" - #60 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby Jewelry

  • Monroeville, Pennsylvania, United States
  • Jan 30th
.035" - 0.90mm - #65 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

.035" - 0.90mm - #65 - 1/8" Shank Carbide Drill Bits FIVE Pcs CNC Dremel Hobby

  • Monroeville, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

5x HSS Combined Center Drills Countersinks 60 Degree Angle 60° Bit Tip Tool Set

5x HSS Combined Center Drills Countersinks 60 Degree Angle 60° Bit Tip Tool Set

  • HK, Hong Kong
  • Mar 6th
5x HSS Combined Center Drills Countersinks 60 Degree Angle 60° Bit Tool Set

5x HSS Combined Center Drills Countersinks 60 Degree Angle 60° Bit Tool Set

  • HK, Hong Kong
  • Mar 6th
Jancy SL150 1-1/2 in. Diameter x 2 inch Depth of Cut Annular Cutter

Jancy SL150 1-1/2 in. Diameter x 2 inch Depth of Cut Annular Cutter

  • Fort Wayne, Indiana, United States
  • Mar 6th
Union Twist Drill 2-61/64" Drill Bit 5MT, 5 Morse Taper 15-3/4" OAL ((#D155))

Union Twist Drill 2-61/64" Drill Bit 5MT, 5 Morse Taper 15-3/4" OAL ((#D155))

  • Green Bay, Wisconsin, United States
  • Mar 9th
Chicago Latrobe 1-3/4" Drill Bit 5MT, 5 Morse Taper 14-1/2" OAL ((#D156))

Chicago Latrobe 1-3/4" Drill Bit 5MT, 5 Morse Taper 14-1/2" OAL ((#D156))

  • Green Bay, Wisconsin, United States
  • Mar 9th
Chicago Latrobe 1-3/4" Drill Bit 5MT, 5 Morse Taper 15" OAL ((#D157))

Chicago Latrobe 1-3/4" Drill Bit 5MT, 5 Morse Taper 15" OAL ((#D157))

  • Green Bay, Wisconsin, United States
  • Mar 9th
12 new PTD #49 CO501-6 Aircraft Extension HSCo Cobalt Precision Twist Drills USA

12 new PTD #49 CO501-6 Aircraft Extension HSCo Cobalt Precision Twist Drills USA

  • Champlain, New York, United States
  • Mar 25th
ASSORTED HSS EXTRA LENGTH AIRCRAFT DRILLS - 5/64" TO 7/16"

ASSORTED HSS EXTRA LENGTH AIRCRAFT DRILLS - 5/64" TO 7/16"

  • Chino, California, United States
  • Mar 26th
Lot of 2 Precision R52 #70 Taper Length Long Drill Bits MADE IN USA

Lot of 2 Precision R52 #70 Taper Length Long Drill Bits MADE IN USA

  • Crystal Lake, Illinois, United States
  • Mar 26th
New 52mm CNC Engraver Fixture Clamp, Motor Mount Holder for CNC Machine Spindle

New 52mm CNC Engraver Fixture Clamp, Motor Mount Holder for CNC Machine Spindle

  • Shenzhen, China
  • May 4th
CUTTING OIL, THE COOLER, GRINDING, CUTTING, MANUFACTERER

CUTTING OIL, THE COOLER, GRINDING, CUTTING, MANUFACTERER

  • Clackamas, Oregon, United States
  • May 4th
KOMET 1.000" KUB Trigon ABS 50 Indexable Drill 3xD w/ Inserts (V12 73490)

KOMET 1.000" KUB Trigon ABS 50 Indexable Drill 3xD w/ Inserts (V12 73490)

  • Englewood, Florida, United States
  • May 5th
HUOT WIRE (SIZES #1 TO #80) DRILL BIT DISPENSER ORGANIZER CABINET - 13040 "NEW"

HUOT WIRE (SIZES #1 TO #80) DRILL BIT DISPENSER ORGANIZER CABINET - 13040 "NEW"

  • Eastlake, Ohio, United States
  • May 13th
9.5mm 2PC SET TWIST Drill bits Metric COBALT HSC HSCO 9.5 mm Split point tip

9.5mm 2PC SET TWIST Drill bits Metric COBALT HSC HSCO 9.5 mm Split point tip

  • Grand Rapids, Michigan, United States
  • May 14th
Chicago Latrobe 190C Cobalt Steel Reduced Shank Drill Bit, Gold Oxide Finish, Ro

Chicago Latrobe 190C Cobalt Steel Reduced Shank Drill Bit, Gold Oxide Finish, Ro

  • Hollywood, Florida, United States
  • May 14th
CHICAGO-LATROBE #2 TAPER SHANK DRILL 43/64''

CHICAGO-LATROBE #2 TAPER SHANK DRILL 43/64''

  • Grafton, Wisconsin, United States
  • May 25th
Bosh Stubby Black Oxid Drill Bits 1/8" pac of 10 Bits NIB Unused

Bosh Stubby Black Oxid Drill Bits 1/8" pac of 10 Bits NIB Unused

  • Mount Washington, Kentucky, United States
  • May 25th
18.5mm Screw Machine Drill, HSS,GUHRING, 82373

18.5mm Screw Machine Drill, HSS,GUHRING, 82373

  • Lebanon, Tennessee, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies