US $10.05
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Model | HSS Series |
Country/Region of Manufacture | China | ||
MPN | N/a |
Directions
Similar products from Sets of Mixed Drills
Huge Lot of 67 Assorted Machinist End Mill Bits Lathe Mill Press
Huge Lot of over 400 Assorted Machinist Drill Bits Thats 22lbs Lathe Mill Press
Huge Lot of 69 Assorted Machinist Counter Sink Drill Bits Lathe Mill Press
LOT OF 8 BITS & DIES FROM TOOL & DIE CO. ALL MADE IN U.S.A.
LOT of 7 BITS & DIES FROM TOOL & DIE CO. ALL MADE IN U.S.A.
HUGE LOT OF 49 BITS ALL MADE IN U. S. A.
HUGE LOT OF 70 BITS & DIES FROM TOOL & DIE CO. ALL MADE IN U.S.A.
One Lot of 4 Extra Long High Speed Drills
Huge Lot of Mixed Used Drill Bits Over 20 Pounds
WORKING CUTTING DIE STARRETT MACHINEST BOAR CALIPERS TOOLS STEEL OTHER LOT NICE
Vintage machinist drill bits--lot of 5 standard, whitman, standard, etc
Vintage machinist drill bit, no name neat and old
Machineing Bits HUGE !!! lot Of
Large mixed lot of 375+ USED Metalworking Drill Bits,Machinist,Maintenance,25#
KEO Zero Flute M35 Cobalt Countersinks 1/4",1/4",5/16",3/8" 60°
1/4" 5 PC Indexable C6 Carbide Insert Lathe Turning Tool
3 PIECE 3/4 SHANK FLY CUTTER SET (3/8-3/8-1/2 INCH CAPACITY)
Set drills bits 8 pcs. from 5.9 to 9.6 mm HSS NOS USSR .
LOT OF 55 pieces. Drill Bits & Milling Machine Machinist Tools
People who viewed this item also vieved
3/4"x6" OAL 90 Deg. 2 Flute drill bit 3/4" straight shank 1-1/2" flute length
1"x7-3/4" OAL 2 flute drill bit 1-1/2" flute length
PTD 437 1-0x90 Degree HSS 8-1/2" OAL 2 flute drill bit 2" flute length
1/16 (.0625) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"
3/64 (.0469) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"
1/32 (.0312) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"
M.A Ford 1/2" x 3D "Cyclone" High-Performance Carbide Stub Drill-ALtima Coated
M.A Ford 7/16" x 3D "Cyclone" High-Performance Carbide Stub Drill-ALtima Coated
M.A Ford 3/8" x 5D "Cyclone" High-Performance Carbide Jobber Drill-ALtima Plus
YG-1 D1C90 High Speed Steel Long Length Center Drill Bit, Uncoated (Bright),
10 Pc Lot Morse Taper #1 Shank Drill Bits MT1 1MT 17/64" to 15/32", 5mm
ITW 1-47/64" Drill Bit 7-1/2" Long Flutes Morse Taper #4 Shank MT4 4MT
Hyper Tool Carbide Tipped Bit with Coolant Hole , 11154R
TM415.5 316420 SANDVIK COROMANT COOLANT DRILL .235"
AMEC .675" x 14.0" Spade Drill .658 " Shank
Titex 3.10mm Jobber Length Drill Bit 11 pcs.
Complete 115 HS Drills Set, ( The Shipping Cost Around $15 To $18)
Carbide tipped BRAND NEW USA made plunge/cut off tools. 6 total pcs.
Rushmore USA 450-300420 Solid Carbide Jobbers Length Twist Drills (Pack of 3)
Barnes Distribution #87040 1/4 HSS Maintenance Length Drill Bits 1 lot of 6
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies