+ Post new Ad
1-1/4" RTW HOLDER HOLDER WITH INSERTS PART# MTRNR-20-4, US $260 – Picture 0
1-1/4" RTW HOLDER HOLDER WITH INSERTS PART# MTRNR-20-4, US $260 – Picture 0

1-1/4" Rtw Holder Holder With Inserts Part# Mtrnr-20-4

US $260

  • Cadiz, Kentucky, United States
  • Feb 27th
Open on mobile:
QR code
(1 New)  1-1/4" RTW HOLDER HOLDER, Part# MTRNR-20-4 comes with (5 Pcs. New) SANDVIK TNMG-433-PM CARBIDE INSERTS  GRADE 4025 CVD-coated carbide grade for finishing to roughing of steel and steel castings. The combination of a wear resistant coating and a tough substrate allows the grade to handle continuous cuts as well as interrupted cuts at high metal removal rates.' Location ST001-40    
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer RTW
Model Tool Holder
Country/Region of Manufacture United States
MPN MTRNR-20-4

Directions

Similar products from Indexable Tool Holders

SECODEX 1-1/2" INDEXABLE END MILL 1-1/4" SHANK + SOLID CARBIDE INSERTS

SECODEX 1-1/2" INDEXABLE END MILL 1-1/4" SHANK + SOLID CARBIDE INSERTS

  • Ellington, New York, United States
  • Feb 28th
SANDIK 4" INDEXABLE FACE MILL 1-1/2" BORE RA290 102R38-12M + CARBIDE INSERTS

SANDIK 4" INDEXABLE FACE MILL 1-1/2" BORE RA290 102R38-12M + CARBIDE INSERTS

  • Ellington, New York, United States
  • Feb 28th
ISCAR 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS

ISCAR 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS

  • Ellington, New York, United States
  • Feb 28th
SANDIK 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS

SANDIK 2" INDEXABLE FACE MILL 3/4" BORE + NEW SOLID CARBIDE INSERTS

  • Ellington, New York, United States
  • Feb 28th
10 SECO inserts XOMX 180608R-M10 F40M NEW!!

10 SECO inserts XOMX 180608R-M10 F40M NEW!!

  • Eastlake, Ohio, United States
  • Feb 28th
NEW KENNAMETAL TOP NOTCH 1/2" SHANK INDEXABLE THREADING TOOL HOLDER + INSERTS

NEW KENNAMETAL TOP NOTCH 1/2" SHANK INDEXABLE THREADING TOOL HOLDER + INSERTS

  • Ellington, New York, United States
  • Feb 28th
KENNAMETAL INDEXABLE TOP NOTCH THREADING GROOVING BAR 5/8" SHANK + INSERTS

KENNAMETAL INDEXABLE TOP NOTCH THREADING GROOVING BAR 5/8" SHANK + INSERTS

  • Ellington, New York, United States
  • Feb 28th
NICE SET OF 3 KENNAMETAL 3/4 SHANK INDEXABLE TURNING TOOL HOLDERS TOP NOTCH

NICE SET OF 3 KENNAMETAL 3/4 SHANK INDEXABLE TURNING TOOL HOLDERS TOP NOTCH

  • Ellington, New York, United States
  • Feb 28th
KENNAMETAL INDEXABLE PARTING TOOL HOLDER 1" X 6" KGDSL 164DH +CARBIDE INSERTS

KENNAMETAL INDEXABLE PARTING TOOL HOLDER 1" X 6" KGDSL 164DH +CARBIDE INSERTS

  • Ellington, New York, United States
  • Feb 28th
New 10pcs Hitachi RDMX1604 MOTN CY250 Round Carbide inserts CNC Milling cutters

New 10pcs Hitachi RDMX1604 MOTN CY250 Round Carbide inserts CNC Milling cutters

  • Dongguan, China
  • Feb 28th
1-1/4" RTW HOLDER HOLDER WITH INSERTS PART# MTFNL-20-4

1-1/4" RTW HOLDER HOLDER WITH INSERTS PART# MTFNL-20-4

  • Cadiz, Kentucky, United States
  • Feb 27th
sandvik A880 D0875LX25-03 drill

sandvik A880 D0875LX25-03 drill

  • Beaverton, ON, Canada
  • Feb 27th
ISCAR HFAER-100C 6T32 INDEXABLE GROOVE BLADE ONLY

ISCAR HFAER-100C 6T32 INDEXABLE GROOVE BLADE ONLY

  • Los Angeles, California, United States
  • Feb 27th
ISCAR HFAEL 75-4T25 INDEXABLE GROOVE BLADE ONLY

ISCAR HFAEL 75-4T25 INDEXABLE GROOVE BLADE ONLY

  • Los Angeles, California, United States
  • Feb 27th
USED KENNAMETAL 1.25"-SHANK DVJNL 204D TURNING TOOL HOLDER VNMG-432

USED KENNAMETAL 1.25"-SHANK DVJNL 204D TURNING TOOL HOLDER VNMG-432

  • Fairfield, Iowa, United States
  • Feb 27th
WELL USED KENNAMETAL USA DCRNR 206D TURNING TOOL HOLDER (1.25" Shank) CNMG-643

WELL USED KENNAMETAL USA DCRNR 206D TURNING TOOL HOLDER (1.25" Shank) CNMG-643

  • Fairfield, Iowa, United States
  • Feb 27th
CNMG 432-SM 4225 Sandvik Carbide Inserts (10 PCS)

CNMG 432-SM 4225 Sandvik Carbide Inserts (10 PCS)

  • Colorado Springs, Colorado, United States
  • Feb 27th
R245-T3 M-KM 1020 Sandvik Carbide Inserts (10 PCS)

R245-T3 M-KM 1020 Sandvik Carbide Inserts (10 PCS)

  • Colorado Springs, Colorado, United States
  • Feb 27th
Valenite 7 Piece Set Mini Indexable End Mills Carbide Inserts 3/4" Shanks

Valenite 7 Piece Set Mini Indexable End Mills Carbide Inserts 3/4" Shanks

  • Jamestown, New York, United States
  • Feb 27th
CARBIDE INSERT INDEXABLE TOOL HOLDER KENNAMETAL 1" X 1 1/2" SHANK KTGR-864C

CARBIDE INSERT INDEXABLE TOOL HOLDER KENNAMETAL 1" X 1 1/2" SHANK KTGR-864C

  • Hutchinson, Kansas, United States
  • Feb 27th

People who viewed this item also vieved

KENNAMETAL BORING HEAD H24NDLPR4W (LOC1263A) TS12

KENNAMETAL BORING HEAD H24NDLPR4W (LOC1263A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
KENNAMETAL BORING HEAD H20MWLNL4 (LOC1262A) TS12

KENNAMETAL BORING HEAD H20MWLNL4 (LOC1262A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
DEVLIEG 45CMA 3M ADAPTER

DEVLIEG 45CMA 3M ADAPTER

  • Webster City, Iowa, United States
  • Jan 30th
SECO EPB CAT 50 16MM SHRINKER 4" PROJECTION E2504 5803 16400 (LOC1259B)

SECO EPB CAT 50 16MM SHRINKER 4" PROJECTION E2504 5803 16400 (LOC1259B)

  • Laingsburg, Michigan, United States
  • Jan 30th
I.D. Collets - Miscellaneous Sizes

I.D. Collets - Miscellaneous Sizes

  • Emporia, Kansas, United States
  • Feb 13th
Kennametal A08 NER2 NE0 CNC Lathe Tool Holder

Kennametal A08 NER2 NE0 CNC Lathe Tool Holder

  • Fox Lake, Illinois, United States
  • Feb 13th
(#4564C) Used Machinist 1” Pipe USA Made Split Sleeve Tap Driver

(#4564C) Used Machinist 1” Pipe USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4570C) Used Machinist 5/8” HT USA Made Split Sleeve Tap Driver

(#4570C) Used Machinist 5/8” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
Maska SHX1-3/8 QD Bushing 1.375" Bore SH X 1 3/8" New

Maska SHX1-3/8 QD Bushing 1.375" Bore SH X 1 3/8" New

  • Rochester, New York, United States
  • Feb 16th
E.A. 1-3/4" OD x 1-1/4" TYPE BJ TOOL HOLDER BUSHING CNC

E.A. 1-3/4" OD x 1-1/4" TYPE BJ TOOL HOLDER BUSHING CNC

  • Cleveland, Ohio, United States
  • Feb 16th
Peterson NMTB 50 1.25" Shell Mill Flush Arbor

Peterson NMTB 50 1.25" Shell Mill Flush Arbor

  • Johnson City, New York, United States
  • Feb 23rd
LOT OF 5 KENNAMETAL CAT40 DA200 TOOL HOLDERS MADE IN USA

LOT OF 5 KENNAMETAL CAT40 DA200 TOOL HOLDERS MADE IN USA

  • Bangor, Pennsylvania, United States
  • Feb 23rd
DOALL LATHE 13" FOLLOW REST

DOALL LATHE 13" FOLLOW REST

  • Plainville, Connecticut, United States
  • Mar 6th
MILWAUKEE 48-66-3240 Chuck Key

MILWAUKEE 48-66-3240 Chuck Key

  • Athens, Alabama, United States
  • Mar 6th
USED UNIVERSAL ENG. KWIK SWITCH-300 SHELL MILL ARBOR 1-1/4'' SMA 1.25" 80335

USED UNIVERSAL ENG. KWIK SWITCH-300 SHELL MILL ARBOR 1-1/4'' SMA 1.25" 80335

  • Fairfield, Iowa, United States
  • Mar 10th
Dorian Internal Threading Bar/ Aloris CA41 Holder/ 20 Carbide threading inserts

Dorian Internal Threading Bar/ Aloris CA41 Holder/ 20 Carbide threading inserts

  • Marysville, Washington, United States
  • Mar 10th
HEALD GRINDING SPINDLE 400-302

HEALD GRINDING SPINDLE 400-302

  • Westland, Michigan, United States
  • May 24th
Grinding head spindle (grinding stones) 21mm India (20pcs)

Grinding head spindle (grinding stones) 21mm India (20pcs)

  • Dnepropetrovsk, default, Ukraine
  • May 24th
BL8-280AH SUNNEN HONE MANDREL WITH ADAPTER .280" - .285" RANGE

BL8-280AH SUNNEN HONE MANDREL WITH ADAPTER .280" - .285" RANGE

  • Cleveland, Ohio, United States
  • May 25th
Sunnen Mandrel: L16-495M, with Adapter, Wedge, Steel Sleeve, Used Stone

Sunnen Mandrel: L16-495M, with Adapter, Wedge, Steel Sleeve, Used Stone

  • Scottsdale, Arizona, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies