+ Post new Ad
1/2 NPT Adjustable Die LITTLE GIANT GREENFIELD TAP&DIE H-570 No. 0, US $300 – Picture 0
1/2 NPT Adjustable Die LITTLE GIANT GREENFIELD TAP&DIE H-570 No. 0, US $300 – Picture 0

1/2 Npt Adjustable Die Little Giant Greenfield Tap&die H-570 No. 0

US $300

  • Cary, Illinois, United States
  • Nov 14th
Open on mobile:
QR code
One GREENFIELD 1/2 inch Little Giant adjustable pipe die. Marked 1/2 No. 0 and H-570. Box has one flap disconnected as in photos.

Directions

Similar products from Punch Tool Sets & Dies

WHITNEY BUTTON DIMPLE PUNCH No 9 SHEET METAL HVAC TOOL

WHITNEY BUTTON DIMPLE PUNCH No 9 SHEET METAL HVAC TOOL

  • Albert Lea, Minnesota, United States
  • Nov 15th
Machine Made Steel Stamps NICE OLD TOOLS Wooden Box

Machine Made Steel Stamps NICE OLD TOOLS Wooden Box

  • Dukedom, Tennessee, United States
  • Nov 15th
MACHINIST TOOLS LATHE MILL Machinist Set Of Center Transfer Punch es

MACHINIST TOOLS LATHE MILL Machinist Set Of Center Transfer Punch es

  • Morris Plains, New Jersey, United States
  • Nov 15th
JF Helmold Steel Rule Circle Die 1 1/4" Punches Lot of 3 no box or markings

JF Helmold Steel Rule Circle Die 1 1/4" Punches Lot of 3 no box or markings

  • Troutman, North Carolina, United States
  • Nov 15th
JF Helmold Steel Rule Circle Die 1 1/4" Punches Lot of 3 in original box

JF Helmold Steel Rule Circle Die 1 1/4" Punches Lot of 3 in original box

  • Troutman, North Carolina, United States
  • Nov 15th
Wilson Tool Die, 13511 1-1/4 Thk Standard Custom

Wilson Tool Die, 13511 1-1/4 Thk Standard Custom

  • Sumner, Iowa, United States
  • Nov 14th
(5) Hanson Ace 14-20 NS 14-20NS Round Fractional Dies. QTY 5. ID 922

(5) Hanson Ace 14-20 NS 14-20NS Round Fractional Dies. QTY 5. ID 922

  • Loudon, Tennessee, United States
  • Nov 14th
BALL LOCK PERFORATING PUNCH DAYTON P.3440 LPX 87 S400 (QTY 3) #3184A

BALL LOCK PERFORATING PUNCH DAYTON P.3440 LPX 87 S400 (QTY 3) #3184A

  • Resaca, Georgia, United States
  • Nov 14th
(4) Hanson Ace 14-20 NS 14-20NS Round Fractional Dies. QTY 4. ID 923

(4) Hanson Ace 14-20 NS 14-20NS Round Fractional Dies. QTY 4. ID 923

  • Loudon, Tennessee, United States
  • Nov 14th
Schmidt A24 Steel Stamp Holder, Interchangeable, 1/4 - 1-1/2" Recess, Machinist

Schmidt A24 Steel Stamp Holder, Interchangeable, 1/4 - 1-1/2" Recess, Machinist

  • Fort Thomas, Kentucky, United States
  • Nov 14th
Whitney Metal Tool Co - Imperial Punch - Handheld Sheet Metal - No.7**WORKS**

Whitney Metal Tool Co - Imperial Punch - Handheld Sheet Metal - No.7**WORKS**

  • Sun City, California, United States
  • Nov 14th
SELF CENTERING PUNCH KIT SET 8 PUNCHES1/4",5/16'',3/8'',7/16'',1/2'',5/8",3/4,1

SELF CENTERING PUNCH KIT SET 8 PUNCHES1/4",5/16'',3/8'',7/16'',1/2'',5/8",3/4,1

  • Worcester, Massachusetts, United States
  • Nov 14th
Turret Punch Press Tooling .142 x .312 oblong punch and die wiedemann

Turret Punch Press Tooling .142 x .312 oblong punch and die wiedemann

  • Palos Hills, Illinois, United States
  • Nov 13th
Turret Punch Press Tooling .125 x .250 oblong punch and die wiedemann

Turret Punch Press Tooling .125 x .250 oblong punch and die wiedemann

  • Palos Hills, Illinois, United States
  • Nov 13th
Turret Punch Press Tooling .250 x .375 oblong punch and die wiedemann

Turret Punch Press Tooling .250 x .375 oblong punch and die wiedemann

  • Palos Hills, Illinois, United States
  • Nov 13th
Turret Punch Press Tooling .156 x .280 oblong punch and die wiedemann

Turret Punch Press Tooling .156 x .280 oblong punch and die wiedemann

  • Palos Hills, Illinois, United States
  • Nov 13th
Generic Heavy Duty Id Card Badge Lanyard Slot Punch Plier Tool

Generic Heavy Duty Id Card Badge Lanyard Slot Punch Plier Tool

  • USA, United States
  • Nov 13th
High Quality For Long Drive Pin Punches -Tip Dia 5/16 Inches Over All (200MM)

High Quality For Long Drive Pin Punches -Tip Dia 5/16 Inches Over All (200MM)

  • New Delhi, India
  • Nov 13th
Vintage WHITNEY-JENSEN PUNCH NO. 5 JR in Original Metal Case - Old USA Tools VGC

Vintage WHITNEY-JENSEN PUNCH NO. 5 JR in Original Metal Case - Old USA Tools VGC

  • Malden, Massachusetts, United States
  • Nov 13th
Punch Press / Iron Worker Dies

Punch Press / Iron Worker Dies

  • Marysville, Ohio, United States
  • Nov 13th

People who viewed this item also vieved

duMONT 77708 11/32 HEX. BROACH PILOT

duMONT 77708 11/32 HEX. BROACH PILOT

  • West Milford, New Jersey, United States
  • Jan 30th
Machinists 11/30 BUY NOW Dumont (the best 8mm Keyslot Broach Little ?? No ?? use

Machinists 11/30 BUY NOW Dumont (the best 8mm Keyslot Broach Little ?? No ?? use

  • Lutz, Florida, United States
  • Jan 30th
5 Pcs. CARMEX 16 ER AG60 BXC Carbide Threading Inserts 60°

5 Pcs. CARMEX 16 ER AG60 BXC Carbide Threading Inserts 60°

  • Tel Aviv, Israel
  • Jan 30th
Allied Spade Blade Series #3 GEN2 T-A 453T-0116 1pc

Allied Spade Blade Series #3 GEN2 T-A 453T-0116 1pc

  • Spencer, Indiana, United States
  • Jan 30th
FIVE KENNAMETAL SDET43PDEL8GB2 SDET1204PDELGB2 KC725M INSERT a16

FIVE KENNAMETAL SDET43PDEL8GB2 SDET1204PDELGB2 KC725M INSERT a16

  • Gardena, California, United States
  • Jan 30th
TWO KENNAMETAL DWG 1007826R00 INSERT a25

TWO KENNAMETAL DWG 1007826R00 INSERT a25

  • Gardena, California, United States
  • Jan 30th
Niagara Cutter Carbide DPB230 2FL Diamond Plated 1/2x1/2x1x3 EDP# 18438

Niagara Cutter Carbide DPB230 2FL Diamond Plated 1/2x1/2x1x3 EDP# 18438

  • Reynoldsville, Pennsylvania, United States
  • Jan 30th
1 NEW 5/16 x 5/16 x 7/16 x2" long . 3 flute carbide ball end mill tialan coated

1 NEW 5/16 x 5/16 x 7/16 x2" long . 3 flute carbide ball end mill tialan coated

  • Schuylkill Haven, Pennsylvania, United States
  • Jan 30th
1-1/16"x3" Cutting Depth, HSS Annular Cutter with 3/4" Weldon Shank, #2083-2022

1-1/16"x3" Cutting Depth, HSS Annular Cutter with 3/4" Weldon Shank, #2083-2022

  • TORONTO, ONTARIO, Canada
  • Jan 30th
HSS Annular Cutter 2-3/16" x1" Cutting Depth with 1 Pc Pilot Pin, #2080-2040PIN

HSS Annular Cutter 2-3/16" x1" Cutting Depth with 1 Pc Pilot Pin, #2080-2040PIN

  • TORONTO, ONTARIO, Canada
  • Jan 30th
18 Pcs H.S.S. Tap & Drill Set, Metric, in Metal Box, #0001-0052

18 Pcs H.S.S. Tap & Drill Set, Metric, in Metal Box, #0001-0052

  • TORONTO, ONTARIO, Canada
  • Jan 30th
5/0 Taper Pin Reamer Spiral Flute HSS Machinist Tool Morse Union Or Standard USA

5/0 Taper Pin Reamer Spiral Flute HSS Machinist Tool Morse Union Or Standard USA

  • United States
  • Jan 30th
JET 708719 Replacement Upper & Lower Guide Blocks

JET 708719 Replacement Upper & Lower Guide Blocks

  • Denver, Pennsylvania, United States
  • Jan 30th
F & D Jewelers Saw J-103 1X.010X3 8 -Quatities Available USA NOS

F & D Jewelers Saw J-103 1X.010X3 8 -Quatities Available USA NOS

  • Twin Lakes, Wisconsin, United States
  • Jan 30th
R56 Drill Bit S&D 1/2" Shank HSS Black & Bright #3

R56 Drill Bit S&D 1/2" Shank HSS Black & Bright #3

  • Vineland, New Jersey, United States
  • Jan 30th
R56 5/8 Drill Bit S&D 1/2" Shank HSS Black & Bright - NEW #2

R56 5/8 Drill Bit S&D 1/2" Shank HSS Black & Bright - NEW #2

  • Vineland, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies