1 2 steam valve for sale, brand-new and used.

1-1/2" BRONZE CRANE #2501 SAFETY RELIEF VALVE, SET AT 200 PSI Our Price: $179.00 Make: Crane Part Number: 2501 Details: Size: 1-1/2" Male NPT x 1-1/2" Female NPT Type: 2501 Set Pressure: 200 PSI Capacity: 1716 Lbs (Steam / Hr ) S

Macon Controls N10837 Radiator Valve 1/2 Inch NPT Angle Pattern Steam/Hot Water

var itemNumber = window.ebayItemID ?

1/2" Solder, Lead Free, Ball Valve, 150 PSI WSP Steam, 600 PSI Non Shock WOG, -20 To 300 Degree Fahrenheit Temperature Range, Galvanized Handle With Vinyl Grip, Soldered Ends Comply With ANSI B1.20.1, HOMEWERKS WORLDWIDE LLC 116-4-1

NEW ~ 1-1/4” Full Port Zinc Plated Brass Ball Valve Heavy Duty Handle 150 PSI SWP 600 PSI NonShock WOG This Bid is for ONE (1) Zinc Plated Ball Valve 150/600

(4) Homewerks 116-2-14-14 No-Lead Full Port Ball Valve with 1/4-Turn, Female Thread x Female Thread, Brass, 1/4-Inch

(3) Homewerks 116-2-38-38 No-Lead Full Port Ball Valve with 1/4-Turn, Female Thread x Female Thread, Brass, 3/8-Inch

 

3 Steampunk Gauges US Gauge Diameter 2 1/4", Crosby Steam Gauge and Valve (Ingersoll Rand) is about 3 5/8" and a Mitchell, Lewis & Staver Gauge about 2 5/8". Sold as parts, may or may not work, I have no way to test. All Antique and Vintage.

Here is a Bronze Oil Gauge that is not marked, but is made similar to Lunkenheimer. It is 4 3/8" tall and has a 1/4" threaded connecting inlet. It is in very good overall condition with no chips or cracks on the glass, and it has no wrench marks.

The Wonders of Machinery Hall: World's Columbian Exposition – Chicago 1893, articles and illustrations from the 1892 and 1893 issues of American Machinist magazine, selected, edited and published by Lindsay Publications, Bradley, IL, 2008. 8 1/2 x 11 papperback, 192 pages. ISBN 1-55918-367-5 Please note this book is new, not used.

This is a VERY hard to find original crankcase oil sight gauge for an early engine of some sort. It is very ornate and has a drain valve built right into it. It is in good condition with no cracks, breaks, or repairs of any kind except that the glass needs to be replace.

SELLING A NICE WHAT IS IT?? VERY OLD VINTAGE IN LINE BRASS PETCOCK VALVE(1/2" THREADED ENDS), BRASS FITTINGS, ACRYLIC/PLASTIC CHAMBER ASSEMBLY; HAVEN'T BEEN ABLE TO FIGURE OUT WHAT IT IS OR WAS USED FOR?? THE BRASS TUBE SLIDES IN & OUT OF THE CHAMBER(ABOUT 1 1/4" TOTAL); IT IS A SEALED CHAMBER (ABOUT 1 1/2" OUTSIDE DIAMETER AND 3 1/4" LONG); ALL OF THE PIECES ARE OLD VINTAGE BRASS; FOR: HIT AND MISS ENGINE ?, ANTIQUE TRACTOR ?