+ Post new Ad
1/2" X 10' Cincinnati Model 4310 Shear New 1998, US $149,500.00 – Picture 0
1/2" X 10' Cincinnati Model 4310 Shear New 1998, US $149,500.00 – Picture 0

1/2" X 10' Cincinnati Model 4310 Shear New 1998

US $149,500.00

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
     Pre Owned 1998 Cincinnati Model 4310  Mechanical Power Squaring Shear     Serial Number  50478 GENERAL SPECIFICATIONS: Capacity                                1/2” Distance Between Housings          10’3” Back Gauge Range        0 - 36” Back Gage Speed         120” PER MINUTE Rake Taper         3/8” PER FOOT Throat         4” Strokes Per Minute         40 Hydraulic Hold Downs:        13 Distance Under Hold Downs         3/4” Main Drive Motor                            15 HP EQUIPPED WITH:                   Digital Gauge Control     99 Program Capacity, 99 Steps Each Program     Off Line Storage Met-Fab Model 1/2 X 10 Rear Exit Conveyor     Serial Number: 9810     10 Steel Belts     Pneumatic Sheet Supports for This Gauge Material     Pneumatic Scrap Separator     Scrap Tray 10’ Squaring arm Dual Electric Foot Switchs Ball Transfers In Table 36” Front Operated Power Back Gauge Jaw Clutch/ Friction Brake Automatic Pressure Lubrication Interlocked Steel Construction Non Float Inclined Ram   Electrics             230/460/3/60 Approximate Overall Dimensions                 Approximate Overall Weight        35000 lbs           Loading onto your truck is included More pictures at alecomachinery.com Any questions?   414-264-5848  Alex

Directions

Similar products from Other Manufacturing Equipment & Tools

Hardinge CHNC FANUC SERVO AMPLIFIER BOARD A16B-1200-0800/A06B-6058-H222

Hardinge CHNC FANUC SERVO AMPLIFIER BOARD A16B-1200-0800/A06B-6058-H222

  • Rogers, Ohio, United States
  • Jan 30th
Hardinge CHNC FANUC GRAPHIC BOARD A16B-1211-0901

Hardinge CHNC FANUC GRAPHIC BOARD A16B-1211-0901

  • Rogers, Ohio, United States
  • Jan 30th
Hardinge CHNC FANUC I/O BOARD A16b-1211-094

Hardinge CHNC FANUC I/O BOARD A16b-1211-094

  • Rogers, Ohio, United States
  • Jan 30th
royal products econo dual-bearing live center #4 mt morris taper

royal products econo dual-bearing live center #4 mt morris taper

  • Newhall, California, United States
  • Jan 30th
HEALD I.D. GRINDER 70-A

HEALD I.D. GRINDER 70-A

  • Twining, Michigan, United States
  • Jan 30th
Machinists 1/1/B BUY NOW 36T #1 NOS Perfect Change Gear 10" 12"

Machinists 1/1/B BUY NOW 36T #1 NOS Perfect Change Gear 10" 12"

  • Lutz, Florida, United States
  • Jan 30th
Z Axis Actuator 1:2 Belt Driven

Z Axis Actuator 1:2 Belt Driven

  • VERIA, IMATHIA, Greece
  • Jan 30th
SAFETY HOOK 10 LEA 3/8" CE KWB HSB 10-8 ALLOY L7B NOS PROTECTIVE GEAR

SAFETY HOOK 10 LEA 3/8" CE KWB HSB 10-8 ALLOY L7B NOS PROTECTIVE GEAR

  • Punta Gorda, Florida, United States
  • Jan 30th
3/4" x 1/2 REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

3/4" x 1/2 REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

  • Punta Gorda, Florida, United States
  • Jan 30th
1/4" INSULATED NUT DRIVER CERTIFIED PRODUCTS "C" 100 VOLTS 1/4" x 6" USA NEW

1/4" INSULATED NUT DRIVER CERTIFIED PRODUCTS "C" 100 VOLTS 1/4" x 6" USA NEW

  • Punta Gorda, Florida, United States
  • Jan 30th
1/4" X 12' Cincinnati Model 2500 FSU Hydraulic Shear

1/4" X 12' Cincinnati Model 2500 FSU Hydraulic Shear

  • Milwaukee, Wisconsin, United States
  • Jan 30th
29/32" x 1/2 REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

29/32" x 1/2 REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

  • Punta Gorda, Florida, United States
  • Jan 30th
MARTIN STRIKE 1-7/16" WRENCH OPEN END 13-1/2" OAL USA NOS MACHINE TOOLING

MARTIN STRIKE 1-7/16" WRENCH OPEN END 13-1/2" OAL USA NOS MACHINE TOOLING

  • Punta Gorda, Florida, United States
  • Jan 30th
1/4" X 10' Guifil Model PE 1530 Hydraulic Shear

1/4" X 10' Guifil Model PE 1530 Hydraulic Shear

  • Milwaukee, Wisconsin, United States
  • Jan 30th
35/64" x 1/2" REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

35/64" x 1/2" REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

  • Punta Gorda, Florida, United States
  • Jan 30th
23/32" x 1/2" REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

23/32" x 1/2" REDUCED SHANK DRILL BIT HSS 6" OAL NEW MACHINIST TOOLMAKER

  • Punta Gorda, Florida, United States
  • Jan 30th
1/2" X 12' HTC 500-12 Hydraulic Shear

1/2" X 12' HTC 500-12 Hydraulic Shear

  • Milwaukee, Wisconsin, United States
  • Jan 30th
2006 DOOSAN Puma 400 MB, 18" Chuck, 2,000 RPM, 12 Station Turret

2006 DOOSAN Puma 400 MB, 18" Chuck, 2,000 RPM, 12 Station Turret

  • Scottsdale, Arizona, United States
  • Jan 30th
40 KVA Lors Press Type Projection Welder

40 KVA Lors Press Type Projection Welder

  • Elk Grove Village, Illinois, United States
  • Jan 30th
AERO-MOTIVE BALANCER 8-15 LBS 6Z158 NEW

AERO-MOTIVE BALANCER 8-15 LBS 6Z158 NEW

  • Miami, Florida, United States
  • Jan 30th

People who viewed this item also vieved

Titanium Plate 6AL4V 36" x 7.5" x .160"

Titanium Plate 6AL4V 36" x 7.5" x .160"

  • Huntington Beach, California, United States
  • May 31st
Titanium Plate 6AL4V 45" x 7.5" x .160"

Titanium Plate 6AL4V 45" x 7.5" x .160"

  • Huntington Beach, California, United States
  • May 31st
Titanium Plate 6AL4V 46.5" x 10.375" x .153"

Titanium Plate 6AL4V 46.5" x 10.375" x .153"

  • Huntington Beach, California, United States
  • May 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies