1.5 M Waterproof Tanking Set Aqua Build Shower Liquid Foil Membrane Seal Kit1

GBP 5.49

Guyhirn, Cambridgeshire, United Kingdom
Jul 9th

Open on mobile:
QR code

Aquabuild Feedback Our other auctions CHECK OUT OUR EBAY STORE We invite you to read the listing description Shop home Single containers (18) Tanking kits (9) Tapes, mats, corners & collars (55) Primers (5) Other (35) Shipping Payments AQUA BUILD 1.5 m KIT: 1.5kg Liquid Foil 1L Acrylic Primer 5m Tanking Tape 2x inner corner joints 2x pipe collars (1-3cm ) Kitchen Bathroom Shower Fleece-backed tape Wet room Solvent-free Ready-to-use Watertight For Indoor and Outdoor use PRODUCT DESCRIPTION LIQUID FOIL is a ready-to-use, one-component, elastic sealing compound for waterproofing walls, floors and ceilings inside and outside buildings. Widely used for sealing showers, bathrooms and wet rooms. It is also used for sealing terraces, balconies and garages. It is especially useful as an insulation for plasterboards, plywood boards and backer boards that will be covered with tiles. Can be applied on other surfaces such as concrete, plaster, wood. LIQUID FOIL is a high quality mixture of polymeric binder, mineral fillers and modifying agents. Applied product does not pass water after drying. Fills hairline cracks in the substrate. It has excellent adhesion to most materials. It reduces the risk of cracks forming in cladding materials as a result of different thermal expansion of the substrate and cladding, eg ceramic tiles. After drying, it is frost-resistant. SURFACE PREPARATION AND APPLICATION Apply to the substrate that is clean, sound and free of dust, dirt, debris and paint remains or grease. Fill cracks and holes. For porous surfaces, such as aerated concrete, it is recommended coat of ACRYLIC PRIMER or DEEP PRIMER PRO in order to reduce the absorbency of the substrate. Strengthen the corners and joints with elastic tape, blending the edges in Liquid Foil. Mix contents thoroughly before use. Next, apply the material onto the prepared substrate using a brush or mason brush, in two layers. Apply the second coat after the previous dries (about 3 hrs.). Fresh plaster and cement floors can be sealed, after at least 28 days from the time the application. Protect surfaces covered with LIQUID FOIL against mechanical damage and rain until completely dry. Clean tools with water immediately after use. NOTES Store the product in closed original packaging. The manufacturer is not liable for misuse of the product or not following instructions on the packaging. appearance: blue semi-liquid putty, used and stored at air and ground temperatures of: from 5 to 30°C (also applies to drying), drying time: full mechanical strength after 3 days interval between the application of the last layer and laying tiles min. 24 hours., water exposure after 7 days of application. density: about 1.5 g/cm3, consumption: 1.1 kg / m2 with a total thickness of 2 layers: 1 mm, 12 months warranty from date of manufacture on the original sealed packaging TAPE LENGHT: 5 metres TAPE WIDTH: 120 mm PIPE COLLAR SIZE: 120 mm PIPE COLLAR HOLE DIAMETER: 10-30 mm All rights reserved (C) 2017 Created by INTERACTIVE PROGRESS

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Type	Waterproofing Kit
Packaging	Buckets
Features	Moisture Retardant, Mould Resistant/Mildew Resistant, Paintable, Water Resistant
Brand	Aqua Build
Unit Type	m
Suitable For	Attic/Loft, Basement, Ceiling, Cold Room, Exterior Wall, Floor, Garage, Interior Wall, shower, bathroom, wet room