+ Post new Ad
1/8" Chamfer Carbide Endmill 45 Degrees | 4 flute Micrograin, US $100 – Picture 0
1/8" Chamfer Carbide Endmill 45 Degrees | 4 flute Micrograin, US $100 – Picture 0

1/8" Chamfer Carbide Endmill 45 Degrees | 4 Flute Micrograin

US $100

  • Waterloo, Ontario, Canada
  • Jan 30th
Open on mobile:
QR code
Carbide endmills are preferred for their higher hardness, greater rigidity, and ability to withstand higher cutting temperatures compared to HSS endmills. These properties allow for higher speeds, feeds, and increased production rates, while extending tool life. However, to achieve maximum efficiency with carbide tools, proper machine setup and cutting operations are necessary. This article showcases a 1/8" carbide chamfering endmill with a 45-degree angle and 4 flutes. The endmill has a diameter of .125" and an overall length of 2 inches. The carbide grade is K30-K40 micrograin and the tip measures 0.020". Each purchase includes one piece and a case. If unused items need to be returned, the buyer is responsible for return shipping. For damaged or defective items, contact the seller immediately. Consider combining purchases to save on shipping costs. Precautions for machining with carbide endmills include using a rigid tool holder, reducing endmill stick-out, ensuring concentricity to the spindle, using a rigid workpiece, and having a rigid cutting payment. Paypal is the preferred payment method, and shipping is available via Canada Post and UPS. Shipping times vary based on region and country.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material Carbide

Directions

Similar products from End Mills Router & Drill Bits

MOHAWK - 4-SPIRAL FLUTE - END MILL - .9687" DIA. 9" OAL. 4" LOC. USA

MOHAWK - 4-SPIRAL FLUTE - END MILL - .9687" DIA. 9" OAL. 4" LOC. USA

  • McKee, Kentucky, United States
  • Jan 30th
OHIO CUTTER - 6 FLUTE SPIRAL CARBIDE -REAMER- 1.75", USA

OHIO CUTTER - 6 FLUTE SPIRAL CARBIDE -REAMER- 1.75", USA

  • McKee, Kentucky, United States
  • Jan 30th
OHIO CUTTER -REAMER - 6 -SPIRAL CARBIDE FLUTES - 2.0" DIA. USA

OHIO CUTTER -REAMER - 6 -SPIRAL CARBIDE FLUTES - 2.0" DIA. USA

  • McKee, Kentucky, United States
  • Jan 30th
Harvey Tool .1562 Flat Cbore Tool 23410-C3 Qty:18

Harvey Tool .1562 Flat Cbore Tool 23410-C3 Qty:18

  • Woodstock, Vermont, United States
  • Jan 30th
Weldon 3/4" a76-HS 4 Flute PrEnd Mill

Weldon 3/4" a76-HS 4 Flute PrEnd Mill

  • Dayton, Ohio, United States
  • Jan 30th
50 PCS 3/16 .187 Carbide endmill | TiAin Coated | 4 flute Center Cutting CNC

50 PCS 3/16 .187 Carbide endmill | TiAin Coated | 4 flute Center Cutting CNC

  • Waterloo, Ontario, Canada
  • Jan 30th
5/16 Solid Carbide Endmill | TiAin Coated | 4 flute Center Cutting CNC

5/16 Solid Carbide Endmill | TiAin Coated | 4 flute Center Cutting CNC

  • Waterloo, Ontario, Canada
  • Jan 30th
(2 pc)-3/4" Diameter, 1 1/2" LOC, 2 Flute Ball Nose End Mill, 4" OAL

(2 pc)-3/4" Diameter, 1 1/2" LOC, 2 Flute Ball Nose End Mill, 4" OAL

  • Grass Lake, Michigan, United States
  • Jan 30th
End Mills

End Mills

  • United States
  • Jan 30th
(2 pc)-27/64" Diameter, 7/8" LOC, 4 Flute Carbide Ball End Mill

(2 pc)-27/64" Diameter, 7/8" LOC, 4 Flute Carbide Ball End Mill

  • Grass Lake, Michigan, United States
  • Jan 30th
1/4" Long Carbide Endmill for Aluminum | 3 flute Center Cutting Flat

1/4" Long Carbide Endmill for Aluminum | 3 flute Center Cutting Flat

  • Waterloo, Ontario, Canada
  • Jan 30th
SCHRILLO 82 DEGREE ANGEL, 5/8, COUNTERSINKS

SCHRILLO 82 DEGREE ANGEL, 5/8, COUNTERSINKS

  • Flushing, New York, United States
  • Jan 30th
3/4 " QUINCO BRITE Roughing End Mill KOCL-24 30726 MPN # 108085 062 LENGTH 5 1/4

3/4 " QUINCO BRITE Roughing End Mill KOCL-24 30726 MPN # 108085 062 LENGTH 5 1/4

  • Ocklawaha, Florida, United States
  • Jan 30th
End Mills HSS 12 Pieces

End Mills HSS 12 Pieces

  • Sun City West, Arizona, United States
  • Jan 30th
1/4" Long Carbide Endmill for Aluminum | 3 flute Center Cutting 5 pcs Flat

1/4" Long Carbide Endmill for Aluminum | 3 flute Center Cutting 5 pcs Flat

  • Waterloo, Ontario, Canada
  • Jan 30th
1/8 Long Carbide Endmill | TiAin Coated | 4 flute Center Cutting 25 pcs

1/8 Long Carbide Endmill | TiAin Coated | 4 flute Center Cutting 25 pcs

  • Waterloo, Ontario, Canada
  • Jan 30th
1/8" Long Carbide Endmill for Stainless Steel | 4-flute Center Cutting

1/8" Long Carbide Endmill for Stainless Steel | 4-flute Center Cutting

  • Waterloo, Ontario, Canada
  • Jan 30th
6 MM Carbide Endmill for Aluminum | 3 flute Center Cutting Metric Flat 100 pcs

6 MM Carbide Endmill for Aluminum | 3 flute Center Cutting Metric Flat 100 pcs

  • Waterloo, Ontario, Canada
  • Jan 30th
WIDIA HANITA End Mills Mill Diameter 1/2 X 1/2X1-1/4 Number of Flutes: 6

WIDIA HANITA End Mills Mill Diameter 1/2 X 1/2X1-1/4 Number of Flutes: 6

  • New Bedford, Massachusetts, United States
  • Jan 30th
MILLING Machine 2x ?8mm MIcro Grain SOLID CARBIDE End mill with TIALN Coating

MILLING Machine 2x ?8mm MIcro Grain SOLID CARBIDE End mill with TIALN Coating

  • default, default, Hong Kong
  • Jan 30th

People who viewed this item also vieved

7 KENNAMETAL TOP NOTCH CARBIDE GROOVING INSERTS NG3078R KC810 STK1643

7 KENNAMETAL TOP NOTCH CARBIDE GROOVING INSERTS NG3078R KC810 STK1643

  • Wadley, Alabama, United States
  • Jan 30th
SANDVIK Coromant SEMN 12 04 AZ SEM 24A H13A Lathe Mill Carbide Inserts 10 Pcs

SANDVIK Coromant SEMN 12 04 AZ SEM 24A H13A Lathe Mill Carbide Inserts 10 Pcs

  • Oxnard, California, United States
  • Jan 30th
IT-230600 .230" Minimum Bore 60° Solid Carbide Threading Tool Micro-100® USA

IT-230600 .230" Minimum Bore 60° Solid Carbide Threading Tool Micro-100® USA

  • Seminole, Florida, United States
  • Jan 30th
Hougen HMD150 Low Profile Magnetic Drill for RotaLoc W/Case Manual slick stix

Hougen HMD150 Low Profile Magnetic Drill for RotaLoc W/Case Manual slick stix

  • Lacey, Washington, United States
  • Jan 30th
(#5008) Used USA Made 1.2615 Carbide Tipped Shop Made Stubby Reamer

(#5008) Used USA Made 1.2615 Carbide Tipped Shop Made Stubby Reamer

  • Troy, Michigan, United States
  • Feb 21st
(#5015) New .155 Solid Carbide Chucking Reamer

(#5015) New .155 Solid Carbide Chucking Reamer

  • Troy, Michigan, United States
  • Feb 21st
PUNCH & DIE DI ACRO ROPER WHITNEY OVAL PUNCH + DIE 5/16 x 5/8 DIACRO

PUNCH & DIE DI ACRO ROPER WHITNEY OVAL PUNCH + DIE 5/16 x 5/8 DIACRO

  • Fair Haven, New Jersey, United States
  • Feb 28th
PUNCH & DIE DI ACRO ROPER WHITNEY OVAL PUNCH + DIE .253 x .815 DIACRO

PUNCH & DIE DI ACRO ROPER WHITNEY OVAL PUNCH + DIE .253 x .815 DIACRO

  • Fair Haven, New Jersey, United States
  • Feb 28th
National Twist metal working saw cutting slitting saw blades 3" x 3/64" x 1"

National Twist metal working saw cutting slitting saw blades 3" x 3/64" x 1"

  • Fort Wayne, Indiana, United States
  • Mar 12th
3" metal working slitting cutting saw blade with 1" hole

3" metal working slitting cutting saw blade with 1" hole

  • Fort Wayne, Indiana, United States
  • Mar 12th
KYOCERA Ceramic Turning Inserts CCGT 21.50.2 TN60 Qty 10 [2094]

KYOCERA Ceramic Turning Inserts CCGT 21.50.2 TN60 Qty 10 [2094]

  • Saint Louis, Missouri, United States
  • Jun 10th
NEW SANDVIK FSAN-RNG45T0320670 1/2" CERAMIC 10 PCS

NEW SANDVIK FSAN-RNG45T0320670 1/2" CERAMIC 10 PCS

  • Hesperia, California, United States
  • Jun 11th
3 LATHE TOOL BITS 5/16X2-1/2 5% COBALT STK 9279

3 LATHE TOOL BITS 5/16X2-1/2 5% COBALT STK 9279

  • Wadley, Alabama, United States
  • May 27th
3 LATHE TOOL BITS 5/16X2-1/2 M-42 STK 9278

3 LATHE TOOL BITS 5/16X2-1/2 M-42 STK 9278

  • Wadley, Alabama, United States
  • May 27th
5/16 INCH C HSS KEYWAY BROACH WITH 1 SHIM (2006-1030)

5/16 INCH C HSS KEYWAY BROACH WITH 1 SHIM (2006-1030)

  • Chino, California, United States
  • May 27th
Hassay Savage Keyway Broach Set Model 4-E. Broaches, Bushings, Case. 2 3/8-2 7/8

Hassay Savage Keyway Broach Set Model 4-E. Broaches, Bushings, Case. 2 3/8-2 7/8

  • Steamboat Springs, Colorado, United States
  • May 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies