+ Post new Ad
1/8" X 1-9/16" 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x, US $26.03 – Picture 0
1/8" X 1-9/16" 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x, US $26.03 – Picture 1
1/8" X 1-9/16" 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x, US $26.03 – Picture 0
1/8" X 1-9/16" 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x, US $26.03 – Picture 1

1/8" X 1-9/16" 2-flute Hrc40 Cutting Solid Carbide Flat Endmill -10x

US $26.03

  • --, Hong Kong
  • Jan 30th
Open on mobile:
QR code
1/8" X 1-9/16" 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x MATERIAL : SOLID CARBIDE NO COATING SUITABLE TO CUT WORK-PIECE HARDNESS BELOW HRC40 2-FLUTE CENTER CUTTING HELIX : 35° RIGHT HAND UP CUT CUTTER DIAMETER : 1/8" TOTAL LENGTH : 1-9/16" SHANK DIAMETER : 1/8" PROVIDE TAILOR MADE ENDMILL. MAKE ACCORDING TO CUSTOMER REQUEST. NO ADVANCE PAYMENT REQUIRE. PAY JUST BEFORE SHIPMENT. HIGHLY COST EFFECTIVE. PLEASE WRITE TO ME FOR ANY INQUIRY. WE SHIP WORLDWIDE. BY E-PACKET OR AIR MAIL THANK YOU FOR ATTENTION
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material Carbide
Flutes 2-Flute
Coating None
Cutting Diameter 1/8"
End Type Flat
Overall Length 1-9/16"
Model HRC40 Series
Country/Region of Manufacture China

Directions

Similar products from End Mills Router & Drill Bits

3/16 carbide spot drill 90 degrees

3/16 carbide spot drill 90 degrees

  • United States
  • Jan 30th
New 3/8 carbide END MILL 4 flutes x-long

New 3/8 carbide END MILL 4 flutes x-long

  • United States
  • Jan 30th
MICROCUT END MILL, CARBIDE DBL.ANGLE CUTTER , 1/4 X 90 DEGREE INCL. , LOT OF 2

MICROCUT END MILL, CARBIDE DBL.ANGLE CUTTER , 1/4 X 90 DEGREE INCL. , LOT OF 2

  • Berlin, Connecticut, United States
  • Jan 30th
Lot Of 11 End Mills 3/4",1/2" Ball Nose,1/2" 5Flute

Lot Of 11 End Mills 3/4",1/2" Ball Nose,1/2" 5Flute

  • United States
  • Jan 30th
New 3/8 Chamfer Mills 4 flutes 90 degrrees

New 3/8 Chamfer Mills 4 flutes 90 degrrees

  • United States
  • Jan 30th
NEW--->>> MASTERCUT 1" INCH 4 FLUTE SOLID CARBIDE CENTER CUTTING END MILL

NEW--->>> MASTERCUT 1" INCH 4 FLUTE SOLID CARBIDE CENTER CUTTING END MILL

  • New Middletown, Ohio, United States
  • Jan 30th
HANITA 6255 M-42 2" INCH 8 FLUTE ROUGHING END MILL

HANITA 6255 M-42 2" INCH 8 FLUTE ROUGHING END MILL

  • New Middletown, Ohio, United States
  • Jan 30th
NIAGARA #71333 2" INCH 8 FLUTE ROUGHING END MILL - FREE SHIPPING

NIAGARA #71333 2" INCH 8 FLUTE ROUGHING END MILL - FREE SHIPPING

  • New Middletown, Ohio, United States
  • Jan 30th
3 Solid Carbide Endmills Niagara 3/8" Dia

3 Solid Carbide Endmills Niagara 3/8" Dia

  • Dallas, Texas, United States
  • Jan 30th
3/64 " carbide END MILL 4 flutes coated

3/64 " carbide END MILL 4 flutes coated

  • United States
  • Jan 30th
WALTER F3042.UW26.026.Z02.15

WALTER F3042.UW26.026.Z02.15

  • United States
  • Jan 30th
Walter F3042.UW15.015.Z02.09 INDEXIBLE END MILL

Walter F3042.UW15.015.Z02.09 INDEXIBLE END MILL

  • United States
  • Jan 30th
Sq Shoulder Mill 90Deg, RA390-032M32-17M Retails for $486

Sq Shoulder Mill 90Deg, RA390-032M32-17M Retails for $486

  • Clemmons, North Carolina, United States
  • Jan 30th
Garr tools 220M Carbide endmill 3 bit. 1/16", 5/64",1/8"

Garr tools 220M Carbide endmill 3 bit. 1/16", 5/64",1/8"

  • Bethlehem, Pennsylvania, United States
  • Jan 30th
Controx End Mills

Controx End Mills

  • Troy, Ohio, United States
  • Jan 30th
1/2in. 3 Flute Carbide Steel End Mill

1/2in. 3 Flute Carbide Steel End Mill

  • Fullerton, California, United States
  • Jan 30th
1/2in. 2 Flute Carbide Steel End Mill

1/2in. 2 Flute Carbide Steel End Mill

  • Fullerton, California, United States
  • Jan 30th
R217.69-01.00-3-10-4A SECO TURBO MILL w/ 20 new XOMX10 ... F40M **NEW UNUSED**

R217.69-01.00-3-10-4A SECO TURBO MILL w/ 20 new XOMX10 ... F40M **NEW UNUSED**

  • United States
  • Jan 30th
3/4" Hanita 4C03 Carbide 3 Flute .030CR TiALN Long End Mill (M 747)

3/4" Hanita 4C03 Carbide 3 Flute .030CR TiALN Long End Mill (M 747)

  • Dallas, Texas, United States
  • Jan 30th
HIGH SPEED STEEL ENDMILLS 1" X 2" BALL NOSE 4 FLUTE

HIGH SPEED STEEL ENDMILLS 1" X 2" BALL NOSE 4 FLUTE

  • Bakersfield, California, United States
  • Jan 30th

People who viewed this item also vieved

5 MITSUBISHI CARBIDE INSERTS TPMN160304 321 UTI20T

5 MITSUBISHI CARBIDE INSERTS TPMN160304 321 UTI20T

  • Wadley, Alabama, United States
  • Feb 14th
Ingersoll tnmg270608 tt8125 (10 new inserts)

Ingersoll tnmg270608 tt8125 (10 new inserts)

  • Valparaiso, Indiana, United States
  • Feb 14th
USED INVOLUTE GEAR CUTTER #7 20P 14-16T 7/8"bore 14.5PA HS NATIONAL

USED INVOLUTE GEAR CUTTER #7 20P 14-16T 7/8"bore 14.5PA HS NATIONAL

  • Kelly, North Carolina, United States
  • Feb 14th
HARRIS MODEL 71-3 OXY ACETYLENE CUTTING TORCH ATTACHMENT WITH MODEL 16 HANDLE

HARRIS MODEL 71-3 OXY ACETYLENE CUTTING TORCH ATTACHMENT WITH MODEL 16 HANDLE

  • Peabody, Massachusetts, United States
  • Feb 14th
Champion 11/16" Hand Reamer with Straight Flute #950-11/16"

Champion 11/16" Hand Reamer with Straight Flute #950-11/16"

  • Philadelphia, Pennsylvania, United States
  • Feb 26th
no 3 3mt TAPER REAMER reamer straight flute

no 3 3mt TAPER REAMER reamer straight flute

  • Philadelphia, Pennsylvania, United States
  • Feb 26th
ROPER WHITNEY XX HAND PUNCH KIT - INCLUDES PLASTIC CASE & 8 PUNCH AND DIE

ROPER WHITNEY XX HAND PUNCH KIT - INCLUDES PLASTIC CASE & 8 PUNCH AND DIE

  • Massapequa, New York, United States
  • Mar 5th
3 Mate Slug Free Punch Die Sets Round 2.375 2.303 2.50

3 Mate Slug Free Punch Die Sets Round 2.375 2.303 2.50

  • Henderson, Nevada, United States
  • Mar 5th
NEW LOT OF 4 LENOX HOLE SAW 2 1/2", 2", 1 1/8", 7/8"

NEW LOT OF 4 LENOX HOLE SAW 2 1/2", 2", 1 1/8", 7/8"

  • Elwood, Indiana, United States
  • Apr 25th
36" Plate SAW (28880)

36" Plate SAW (28880)

  • Cincinnati, Ohio, United States
  • Apr 26th
Brand new KENNAMETAL CNGA 431 CERAMIC INSERTS 10 PCS

Brand new KENNAMETAL CNGA 431 CERAMIC INSERTS 10 PCS

  • Charlotte, North Carolina, United States
  • May 24th
KENNAMETAL KGR-8375 CERAMIC INSERTS (10 PCS) KY2000

KENNAMETAL KGR-8375 CERAMIC INSERTS (10 PCS) KY2000

  • Cadiz, Kentucky, United States
  • May 24th
Keyway Broach Bushing 1-3/4" Dia. 9/16" slot .834 Deep 8-1/2" OAL

Keyway Broach Bushing 1-3/4" Dia. 9/16" slot .834 Deep 8-1/2" OAL

  • Milton Freewater, Oregon, United States
  • May 28th
DuMont Minute Man Broach Set (No. 90 Metric)

DuMont Minute Man Broach Set (No. 90 Metric)

  • Fort Worth, Texas, United States
  • May 28th
Micro 100 .250 Grooving Tool

Micro 100 .250 Grooving Tool

  • Fort Worth, Texas, United States
  • May 30th
Lathe tool Bits Lot Cobalt,mo-max Machinist 30 Tools high speed USA mixed SIZES

Lathe tool Bits Lot Cobalt,mo-max Machinist 30 Tools high speed USA mixed SIZES

  • NEW ENGLAND, United States
  • May 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies