+ Post new Ad
1 each YG-1 EMB79040 Carbide Ball Nose End Mill 5/8 x 5/8 x 1-1/4 x 3-1/2 AlTiN, US $240 – Picture 0
1 each YG-1 EMB79040 Carbide Ball Nose End Mill 5/8 x 5/8 x 1-1/4 x 3-1/2 AlTiN, US $240 – Picture 0

1 Each Yg-1 Emb79040 Carbide Ball Nose End Mill 5/8 X 5/8 X 1-1/4 X 3-1/2 Altin

US $240

  • Denver, Colorado, United States
  • Jun 20th
Open on mobile:
QR code
YG-1 EMB79040 Carbide Ball Nose End Mill 5/8 x 5/8 x 1-1/4 x 3-1/2 AlTiN 4 Flute Vibration Resistant, Weldon Shank, AlTiN Monolayer Finish, 4 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter.  Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining"). Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Higher speeds, deeper cuts and metal removal rates. Ball Nose 4 Flute Single End. 0.625" Cutting Diameter. 0.625" Shank Diameter. 1.25”" Length of cut. 3.5" Overall Length.

Directions

Similar products from End Mills Router & Drill Bits

1/2” x 1/2” x 1” x 4-1/8” 3 flute Fastcut HSS M7 Double End Mill CTR CUT – F39

1/2” x 1/2” x 1” x 4-1/8” 3 flute Fastcut HSS M7 Double End Mill CTR CUT – F39

  • Cleveland, Ohio, United States
  • Jun 20th
HHIP 3900-3010 Parallel Set 10 Pair Set in Original Box

HHIP 3900-3010 Parallel Set 10 Pair Set in Original Box

  • Canby, Oregon, United States
  • Jun 20th
ACCUPRO .050R X 3/16 SHANK X 2" OAL END MILL STK8859

ACCUPRO .050R X 3/16 SHANK X 2" OAL END MILL STK8859

  • Wadley, Alabama, United States
  • Jun 20th
Lot 3pcs 2Flute Carbide Aluminum End Mills Cutting Dia 8mm Shank Dia 8mm

Lot 3pcs 2Flute Carbide Aluminum End Mills Cutting Dia 8mm Shank Dia 8mm

  • CN, China
  • Jun 20th
LOT OF REGAL & OTHER COBALT BALL END MILLS 3/4"

LOT OF REGAL & OTHER COBALT BALL END MILLS 3/4"

  • California, United States
  • Jun 20th
LOT OF PUTNAM & HSS BALL END MILLS 1/2"

LOT OF PUTNAM & HSS BALL END MILLS 1/2"

  • California, United States
  • Jun 20th
1/64" (.0156") MICRO CARBIDE 2 FLUTE ENDMILLS, BALL END, Kyocera 1635-0156L023

1/64" (.0156") MICRO CARBIDE 2 FLUTE ENDMILLS, BALL END, Kyocera 1635-0156L023

  • Georgetown, Texas, United States
  • Jun 20th
NEW HELICAL HSVR-SR-40750-R-3 4 FLUTE 3/4"

NEW HELICAL HSVR-SR-40750-R-3 4 FLUTE 3/4"

  • Hesperia, California, United States
  • Jun 20th
Lot 2pcs 2Flute Carbide Long Aluminum End Mills Cutting Dia 6mm Length 75mm

Lot 2pcs 2Flute Carbide Long Aluminum End Mills Cutting Dia 6mm Length 75mm

  • CN, China
  • Jun 20th
Lot 5pcs 2Flute Carbide Aluminum End Mills Cutting Dia 6mm Shank Dia 6mm

Lot 5pcs 2Flute Carbide Aluminum End Mills Cutting Dia 6mm Shank Dia 6mm

  • CN, China
  • Jun 20th
Benchmark Carbide Endmill 35037524 - 3/8 X 3/8 X 1-1/2 X 4, 3 Flute Single End

Benchmark Carbide Endmill 35037524 - 3/8 X 3/8 X 1-1/2 X 4, 3 Flute Single End

  • Denver, Colorado, United States
  • Jun 20th
1 ea Benchmark Carbide Endmill 350-43716BNC5 - 7/16 X 7/16 X 1 X 2-3/4, 3 Flute

1 ea Benchmark Carbide Endmill 350-43716BNC5 - 7/16 X 7/16 X 1 X 2-3/4, 3 Flute

  • Denver, Colorado, United States
  • Jun 20th
1 ea Benchmark Carbide Endmill 250N375084BNC5 - 3/8 X 3/8 X 1/2 X 4, 2 Flute SE

1 ea Benchmark Carbide Endmill 250N375084BNC5 - 3/8 X 3/8 X 1/2 X 4, 2 Flute SE

  • Denver, Colorado, United States
  • Jun 20th
Benchmark Carbide Endmill 35050016 - 1/2 X 1/2 X 1 X 3, 3 Flute Single End

Benchmark Carbide Endmill 35050016 - 1/2 X 1/2 X 1 X 3, 3 Flute Single End

  • Denver, Colorado, United States
  • Jun 20th
Benchmark Carbide Endmill 35025032 - 1/4 X 1/4 X 2 X 4, 3 Flute Single End

Benchmark Carbide Endmill 35025032 - 1/4 X 1/4 X 2 X 4, 3 Flute Single End

  • Denver, Colorado, United States
  • Jun 20th
1 ea Benchmark Carbide Endmill 350-37532 - 3/8 X 3/8 X 2 X 4, 3 Flute Single End

1 ea Benchmark Carbide Endmill 350-37532 - 3/8 X 3/8 X 2 X 4, 3 Flute Single End

  • Denver, Colorado, United States
  • Jun 20th
Lot 5pcs 2Flute Carbide Aluminum End Mills Cutting Dia 1mm Shank Dia 4mm

Lot 5pcs 2Flute Carbide Aluminum End Mills Cutting Dia 1mm Shank Dia 4mm

  • CN, China
  • Jun 20th
1 ea Benchmark Carbide Endmill 350-25032C5 - 1/4 X 1/4 X 2 X 4, 3 Flute SEEM

1 ea Benchmark Carbide Endmill 350-25032C5 - 1/4 X 1/4 X 2 X 4, 3 Flute SEEM

  • Denver, Colorado, United States
  • Jun 20th
1 ea Benchmark Carbide Endmill 350-37516BNC5 - 3/8 X 3/8 X 1 X 2-1/2, 3 Flute SE

1 ea Benchmark Carbide Endmill 350-37516BNC5 - 3/8 X 3/8 X 1 X 2-1/2, 3 Flute SE

  • Denver, Colorado, United States
  • Jun 20th
Benchmark Carbide Endmill 35025016 - 1/4 X 1/4 X 1 X 2-1/2, 3 Flute Single End

Benchmark Carbide Endmill 35025016 - 1/4 X 1/4 X 1 X 2-1/2, 3 Flute Single End

  • Denver, Colorado, United States
  • Jun 20th

People who viewed this item also vieved

Machinists 11/28 BUY NOW NICE USA 1 1/8 -C Broach Bushing --see all

Machinists 11/28 BUY NOW NICE USA 1 1/8 -C Broach Bushing --see all

  • Lutz, Florida, United States
  • Jan 30th
Machinists 11/28 BUY NOW NICE USA 1 1/4 -C Broach Bushing --see all

Machinists 11/28 BUY NOW NICE USA 1 1/4 -C Broach Bushing --see all

  • Lutz, Florida, United States
  • Jan 30th
50pcs NEW KENNAMETAL XPCW253A5R,Grade K8735,CARBIDE INSERTS.

50pcs NEW KENNAMETAL XPCW253A5R,Grade K8735,CARBIDE INSERTS.

  • Midway City, California, United States
  • Jan 30th
Lot of 20 Sandvik N151.2-A156-40-4P Inserts

Lot of 20 Sandvik N151.2-A156-40-4P Inserts

  • Yellow Springs, Ohio, United States
  • Jan 30th
New 10 Pcs - SNGN 434 T3A Grade GSN Ceramic Inserts SNMG SNGA SNG

New 10 Pcs - SNGN 434 T3A Grade GSN Ceramic Inserts SNMG SNGA SNG

  • Rockford, Illinois, United States
  • Jan 30th
SANDVIK COROMANT, N123H2-0400-0003-GM, *W=4,000MM (0.157"), TURNING INSERT LATHE

SANDVIK COROMANT, N123H2-0400-0003-GM, *W=4,000MM (0.157"), TURNING INSERT LATHE

  • Pinellas Park, Florida, United States
  • Jan 30th
FELLOWS CUTTER GEAR SHAPER TIN & 12-1/8 STEEL PUNCHES SPRINGFIELD VERMONT TOOLS

FELLOWS CUTTER GEAR SHAPER TIN & 12-1/8 STEEL PUNCHES SPRINGFIELD VERMONT TOOLS

  • West Rutland, Vermont, United States
  • Jan 30th
1/2" SHANK WHITNEY MFG CO 1/4" A-8 HS WOODRUFF KEYSEAT KEYWAY CUTTER LATHE TOOL

1/2" SHANK WHITNEY MFG CO 1/4" A-8 HS WOODRUFF KEYSEAT KEYWAY CUTTER LATHE TOOL

  • United States
  • Jan 30th
Antique 1/2" steel Alphabet letter punch set metal stamp blacksmith A - Z - &

Antique 1/2" steel Alphabet letter punch set metal stamp blacksmith A - Z - &

  • Santa Cruz, California, United States
  • Jan 30th
Osborne No. 149 arch punch 13/16"

Osborne No. 149 arch punch 13/16"

  • Niles, Michigan, United States
  • Jan 30th
Excellent Huot Over/Under Reamer Index .121 - .501" Complete

Excellent Huot Over/Under Reamer Index .121 - .501" Complete

  • Pontiac, Michigan, United States
  • Jan 30th
LOT OF 5 MORSE REAMERS 3 at 7/8" 2 at 23/32" a

LOT OF 5 MORSE REAMERS 3 at 7/8" 2 at 23/32" a

  • Fort Mohave, Arizona, United States
  • Jan 30th
Circular saw blades 9 new blades

Circular saw blades 9 new blades

  • Greensboro, North Carolina, United States
  • Jan 30th
New Morse Master Cobalt Bi-Metal Hole Saw 7/8" (22mm) cuts metal,wood,plastic

New Morse Master Cobalt Bi-Metal Hole Saw 7/8" (22mm) cuts metal,wood,plastic

  • Palm Coast, Florida, United States
  • Jan 30th
MORSE BURR CUTTING BITS #59886

MORSE BURR CUTTING BITS #59886

  • Bakersfield, California, United States
  • Jan 30th
FULLERTON TOOL BURR BIT #46102

FULLERTON TOOL BURR BIT #46102

  • Bakersfield, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies