1 inch thick, 4/4 Red Oak Board 21.5" x 3.25" x ~1in. Wood craft Lumber, US $12.58 – Picture 0

1 inch thick, 4/4 Red Oak Board 21.5" x 3.25" x ~1in. Wood craft Lumber, US $12.58 – Picture 1

1 inch thick, 4/4 Red Oak Board 21.5" x 3.25" x ~1in. Wood craft Lumber, US $12.58 – Picture 2

1 Inch Thick, 4/4 Red Oak Board 21.5" X 3.25" X ~1in. Wood Craft Lumber

US $12.58

Antioch, Illinois, United States
Jun 9th

Open on mobile:
QR code

This Listing ¦ Shipping ¦ Need other thin boards? ¦ International shipping? ¦ What about full thickness lumber? ¦ Know your lumber terms.... Red Oak Board In this listing I'm selling a Red Oak board. This board is 21.5" long, 3.25" wide, and about 1" thick. You are getting the exact board pictured. How strong or hard is Red Oak? Click here and find out. Need more than this? Send me a message. I have tons of in all sizes and thicknesses. If you have any questions or concerns, you can leave me a message by clicking here. . The photos are the exact wood you will get. I guarantee your satisfaction. Completely free, anywhere in the USA. I gladly combine purchases to keep your shipping costs as low as possible. Returns: I glady accept returns. If you are unhappy with your purchase for any reason, simply drop me a message, and I'll work it out with you. I'm a wood worker too, and I'm not here to rip anyone off. This listing might be selIing Red Oak, but it's certainly not the only species we carry. If you need other wood, then you've come to the right place. I have almost all domestic species, in any width, length, and thickness you need. Just send me an eBay message, and I'll get you taken care of. I do custom cutting all the time, and post what you need right up here. Scroll saw folks love us, because we have wood 1/16" thick, on up. I carry Aspen, Black Walnut, Black Cherry, Red Oak, White Oak, Maple, Poplar, Alder, Red and Grey Elm, White Ash, Purpleheart, Bloodwood, Knotty Pine, Mahogany, and many, many more. Yup, we do that too. We ship worldwide. Our biggest international buyer seems to be Australia, but we love all our international shoppers. Yup, we have that too. I carry Aspen, Black Walnut, Black Cherry, Red Oak, White Oak, Maple, Poplar, Alder, Red and Grey Elm, White Ash, Purpleheart, Bloodwood, Knotty Pine, Mahogany, and many, many more. Some of it up to 12/4 thickness (that's 3"). 4/4, 5/4, 6,4, etc. Lumber, when purchased from the saw mill, is measured in "Quarters". When you see the term "4/4", you call that "four quarters". 5/4 is Five Quarters. 6/4 is Six Quarters. If the sawmill operator wants to cut a 1" board off the log, he sets his gauges to read "four quarters", or "4/4". If he wants a board 1.25" thick, he sets his sawmill thickness gauge to 5/4. If he's after a board 2" thick, he'd set the gauge to 8/4, and he'd call that "an eight quarter board". Board Foot If you take the length of a board (in inches), and multiply it by the width of the board (in inches), and it's a 1" (or 4/4...same thing) board, and then divide that by 144, your resulting number is the number of "board feet" in that board. For a board 4 feet long, and 6 inches wide, and 1" thick, the formula is (48 x 6 x 1 )/ 144, or 2 board feet. If that board was a "six quarter" board (6/4)...which we know is 1.5" thick, the formula would be 48 x 6 x 1.5 / 144. Square Feet Exactly as above, except you leave out the thickness in all cases. Thickness is ignored. Square Feet, is a surface measurement. Ripping a board If you took a board that was 8 feet long, and 6" wide, and cut it such that you now had two 8 foot boards, each being about 3" wide, you would need to perform a ripping cut on that board. In other words, a rip cut, is a lengthwise cut on a board. Cross Cut Is a cut "across" the width of a board. It would be like cutting an 8 foot board, into two 4 foot pieces. One cross cut, midway on the board, would give you two 4 foot pieces. Planing When a board comes direct from the sawmill, the faces of the board is often very rough. To get it smooth, it's run through a "planer". The act of doing so, is called "planing the board smooth". When you buy a board at your hardware store, it is usually already planed on both sides. When your hardware store buys their lumber, they buy 4/4 boards, and plane them down to 3/4"....and then tell you it's a 1" thick board. Hardware stores have problems measuring. Jointing Woodshops have a machine called a "jointer". It's purpose is to get the edges of a board nice and smooth. Often times, a scroll sawyer will put a frame around his scroll sawed art work, thus hiding the edges of the board. So, scroll sawyers will often not care if their boards are jointed, or not. Most of our boards are jointed, sometimes not. If clean edges matter to you, then ask if your boards will be jointed. Powered by SixBit's eCommerce Solution On Sep-22-15 at 06:05:57 PDT, seller added the following information:

“If you need wood, I'm your guy...”

Length	21.5"
Moisture Content	Kiln Dry
Width	3.25"
Origin	Northern Wisconsin Amish Country
Thickness	1"
Species	Red Oak
Board Surface	May need sanding
UPC	Does Not Apply