US $75.50
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | SMITH TOOL |
MPN | 3722 | ||
Model | 3722 |
Directions
Similar products from Adapters & Arbor Tool Holders
Merit M-6 Cartridge and Spiral Roll Mandrel, 1/8" Pilot Diameter x 1-1/2" Pilot
NEW Llambrich 5/8" Straight Shank Shank to Jacobs Taper 33 Arbor
Merit M-4 Cartridge and Spiral Roll Mandrel, 1/8" Pilot Diameter x 3/4" Pilot
NEW Albrecht 70622 1" Straight Shank To J2 Arbor
NEW Albrecht 70586 1/2" Straight Shank To J0 Arbor
SUNWIN 7/16 22mm R8 Shank Milling Arbor Gear Mill Cutter Holder Machine Tool
NEW Grizzly G5715 Morse Taper Sleeve, MT4/MT3
NEW MT1 to MT2 Morse Taper Adapter Drill Sleeve No. 1 to No. 2
NEW Albrecht 70557 4MT To J33 Arbor
NEW Grizzly G5713 Morse Taper Sleeve, MT2/MT1
Sandvik Coupler 391.610-40 80 053
50 TAPER SHANK 1-1/4" SHELL FACE END MILL ARBOR
(2) KEARNEY & TRECKER 50 TAPER SHANK MORSE / B&S ADAPTER TOOL HOLDERS
(2) HEAVY DUTY 50 TAPER SHANK END MILL TOOL HOLDERS 1/2" & 3/4"
(2) HEAVY DUTY 50 TAPER SHANK END MILL TOOL HOLDERS 1" & 1-1/2"
(2) HEAVY DUTY 50 TAPER SHANK END MILL TOOL HOLDERS 7/8" & 1-1/4"
4MT x 1MT adapter sleeve 4 x 1 morse taper 2 available machine tool reducer
USED UNIVERSAL ENG. KWIK SWITCH-300 SERIES "ZZ" DOUBLE TAPER COLLET CHUCK 80321
USED SOLID MORSE TAPER SOCKET 1.250" x #2MT x 4.00"OAL
People who viewed this item also vieved
COMMAND CAT 50 RETENTION KNOBS RS6E-0204-C STK 2331
(3) CARBOLOY CV45-EM4.00-1250 CAT 45 1 1/4" END MILL TOOL HOLDERS
LATHE QUICK CHANGE TOOL POST HOLDER 250-410 1" TURNING TOOL HOLDER (E,30-40)
SANDVIK 5412 028-011 CLAMP SET, NEW IN PACKAGE
Widia 1.216.56.225.00 + 10 pcs. XOMT 09T306-34 TN7015 Carbide Inserts
New - 308-122 Bottom Support Clamp Manchester
Craftsman Atlas 12" Lathe Milling Cutter Holder & Bushings in Box w/Instructions
(2) Kennametal KV4540 BA20-236F CNC Toolholder, Used
MACHINIST LATHE MILL Lot of 1" Square Carbide Insert Cutting Tools for Lathe
1-1/4" HEX HARDINGE INDEX B42 COLLET
1-1/8" HEX HARDINGE INDEX B42 COLLET
JACOBS # 4 Drill Chuck Key, , Very Good Condition, No Wear on Teeth
NEW GENUINE MT2 JACOBS 1/2" CAPACITY TAILSTOCK DRILL CHUCK 4 LATHE MORSE TAPER 2
Aloris CA-41 Quick Change Heavy Duty Boring Bar Holder 1.5"
KWIK SWITCH 200 3/8" DIAMETER ENDMILL HOLDER END MILL MORE LISTED LOT C12768
12" Spindle with 20 Segment hubs and steel brushes overall diameter 8" .
4" spindle with steel brushes, spindle has a 3/4" bore with set screw for your m
SUNNEN Hone Mandrel 2G-P28-1250WB
Bi Metal Hole Saw Mandrel With Drive PIns for 1-1/4" to 6" bimetal hole saws.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies