1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 0

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 1

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 2

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 3

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 4

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 5

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI, US $2400 – Picture 6

1 X Pre-owned Dmc 60 T,deckel Maho,dmg,at European Machine Tools.llc Wi

US $2400

Hartland, Wisconsin, United States
Jan 30th

Open on mobile:
QR code

www.europeanmachinetool.com Questions feel free to Visit us or call us 262-327-0800 IN STOCK EUROPEAN MACHINE TOOLS.llc (1) Pre-Owned 04-05 DMG DECKEL MAHO DMC60T 5-AXIS UNIVERSAL MACHINING CNTR W/PALLET TNC530 I Heidenhain Control – System with Ethernet and RS 232 Made in Pfronten, Germany -WORKING RANGE- Traverse range X (longitudinal)........................ 30.71" (780 mm) Traverse range Y (transverse).......................... 22.05" (560 mm) Traverse range Z (vertical)............................ 22.05" (560 mm) Volume machining area......................................... 245 dm-3 Max work piece dims 23.62"(600mm)diameter,22.64"(575mm)height,882lbs(400kg) -ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)- -Stable compact construction with optimal linkage to guide way (Y-Axis) -NC rotary table with direct measuring system -Backlash-free preloaded precision spur gear for high rigidity, precision and high torque, maximum holding momentum in closed loop -High rapid feed rate -Note this machine is equipped w/the optional 100mm distance T-slot pallets -Pallet changer allows setup parallel to production time Rotation range...................... 360 x 0.001 degree (Full 4th Axis) Clamping Surface....................... 19.7" x 24.8" (500 mm x 630 mm) Number of Pallets.................................................... 2 Maximum table load.................................... 880 lbs (400 kg) Centre bush........................................ 2" (50 mm) diameter Torque 40% duty cycle.......................... 1,807 ft lbs (2,450 Nm) Holding momentum 40%........................... 1,807 ft lbs (2,450 Nm) Maximum feed.................................. 7,200 degrees per minute Maximum table speed............................................. 30 rpm Positional uncertainty P..................................... 7 arc sec Pallet change time............................ Approximately 10 seconds -SWIVEL MILLING HEAD WITH PROGRAMMABLE B-AXIS- -Integrated 18,000 rpm motor spindle -High pressure coolant supply centrally through spindle centre Swivel Range............................ 150 degrees (-120/+30 degrees) (30 degrees past horizontal,horizontal,vertical,30 degrees past vertical) 150 degree swivel range allows UNDERCUTS and machining at NEGATIVE ANGLES due to the swivel range of 30 degrees across the horizontal or vertical axis.This gives you advanced flexibility for complex parts like impellers. Swivel momentum milling spindle (40% duty cycle) 1,620 ft lbs (2,200 Nm) Holding momentum without clamping (40% duty cycle) 1,438 ft lbs (1,950 Nm) Holding momentum with clamping................. 2,655 ft lbs (3,600 Nm) Rapid motion B-axis............................................. 35 rpm Swivelling time of the head from horizontal-vertical & vice versa 1.5 secs Positional uncertainty P................................. 9 arc seconds -INTEGRATED MOTOR SPINDLE- Type.............................................. Digitally controlled Cooled drive..................................................... Water Power 40% ED.......................................... 37.55 hp (28 kW) Power 100% ED.......................................... 25.5 hp (19 kW) Spindle speed range......................................... 18,000 rpm Acceleration/deceleration 0-18,000 rpm....................... 2 seconds Number of gear steps.............................................. None Spindle torque 40% ED................................ 89 ft lb (121 Nm) Spindle torque 100% ED............................. 60.48 ft lb (82 Nm) Spindle bearing diameter (front/rear)........... 3.15"/2.16" (80/55 mm) Spindle Taper................................................... HSK63 A -FEED DRIVES- Drive cooled X/Y/Z....................................... Air/Air/Water Feed Rate X/Y/Z..................................... 590 ipm (15 m/min) Rapid Feed Rate X/Y/Z............................. 1,968 ipm (50 m/min) Maximum Feed Rate X/Y/Z........................... 1,968 ipm (50 m/min) ACCELERATION X/Y/Z................................... 0.6 g IN ALL AXES Feed Power X/Y/Z........................................... 7/7.2/10 kN Ball Screw Spindle X/Y/Z 1.57"x0.8" (40x20 mm) X&Y,1.97"x0.8"(50x20mm) Z -60 POSITION VERTICAL CHAIN AUTOMATIC TOOL CHANGER- Magazine pockets.................................................... 60 Maximum tool weight................................... 17.64 lbs (8 kg) Maximum tool diameter without free pockets............... 3.15" (80 mm) Maximum tool diameter with free pockets.................. 6.3" (160 mm) Maximum tool length..................................... 12.4" (315 mm) Tool change time Approximately 0.8 seconds, double gripper tool changer Chip-to-chip time Approximately 4 seconds vertical, 10 seconds horizontal -EXTERNAL COOLANT SUPPLY ON THE OUTSIDE OF THE SPINDLE- Pump output.............................. 10.6 gallon/minute (40 l/min) Pump pressure......................................... 22 PSI (1.5 bar) With Paper-Band Filter Systems -PRODUCTION PACKAGE- -238 gallon (900 l) coolant unit capacity -Automatic paper-band filter cleaning with fine filtering of the complete emulsion to less than 50 um -Cleaning of the spindle taper HSK63 A by spindle air blast for high permanent precision also for cleaning with frequent tool changes -580 PSI (40 bar) 6 gallon/min (23 l/min) coolant thru the spindle center -Rotating clear-view window in cabin pane -Chip flushing inside work cabin -Chip conveyor (scraper flight conveyor) -INSTALLATION DATA- Operation voltage..... 400 V input (comes with multi input transformer) Control voltage................................................... 24 V Power consumption at 100% duty cycle............................ 64 kVA Recommended net protection....................................... 100 A Recommended short circuit...................................... 3.6 MVA Compressed air required................................. 87 PSI (6 bar) Air consumption (average value)............................... 20 m-3/h Air consumption with tool cooling............................. 40 m-3/h Total weight with pallet changer..... Approximately 22,000 lbs (9 tons) 3-point support with 3 leveling shoes, no special foundation required -MACHINE IS EQUIPPED WITH- Heidenhain TNC530-I CNC Control with electronic hand wheel HR410 infrared parts measuring probe BLUM Laser tool length and diameter measuring, horizontal/vertical Air blast through spindle center, selected with M-function Spray pistol with pump Multi input transformer Heidenhain glass scales direct measuring system X/Y/Z Axes Heidenhain rotary encoders direct measuring system B/C Axes External coolant nozzles on outside of spindle air/coolant selectable Automatic switch-off of positive air pressure for the main spindle after work end Linear roller guide ways and digital drives. Stability and high precision are ensured with roller guide ways with over-dimensioned distances between the guide ways. The table center of gravity moves in between the vertical guide ways (Z-Axis). Electronic temperature compensation Spindle chiller Available books and manuals Full enclosure of machining area for safety and noise reduction Sensitive machine parts (measuring systems, limit switches, guide-ways, drives) are separat from the machining area Automatic pallet changer Transformer/Multi-Tap. HR410 Heidenhain Hand-Wheel Level-Shoes Under Power : Yes European Machine Tools.LLC Wisconsin PLUS STATE & LOCAL TAXES, IF APPLICABLE PRICE QUOTED IN UNITED STATES DOLLARS PLUS STATE & LOCAL TAXES, IF APPLICABLE SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS MACHINE IS BEING SOLD IN AS IS CONDITION,NO WARRANTY. AS INSPECTED.SPECIFICATIONS IS SUBJECT TO VERIFICATIONS (Catalog specification.) PAYMENT IN FULL VIA WIRE TRANSFER PRIOR TO REMOVAL. FOB:WISCONSIN EMT.LLC HARTLAND 262-327-0800 SOLD AS IS, VIDEOS AVAL.CALL OR VISIT US. www.europeanmachinetool.com QUESTIONS? CALL TOLL FREE 855-855-2947 OR LOCAL 262-327-0800

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“5x Axis Used STOCK European Machine Tools.LLC Hartland WI”