1/2 tek screws for sale, brand-new and used.

40 pcs hex washer head tek 5 screws. These are zinc plated self-drilling sheet metal screws with an extra long drill point tip and are threaded from the top of the tip to the bottom of the hex head. Hex teks 5 have a longer drill tip than regular hex teks.

WELCOME TO RIVERCITY INDUSTRIAL SUPPLY! PHONE: 763 789 BOLT (2658) FAX: 763 789 NUTS (6887) YOU WILL GET THE FOLLOWING: 500 Pieces Of Phillips Pan Head Self - Drilling TEK Screws. These zinc plated fasteners are #8 thread size and are 2" in length.

250-SFS Intec Woodgrip XG "Control Seal" 1 1/2" (HWH) Hex Washer Head Self Tapping Blue Screws.... PRODUCT: #12-8 x 1-1/2 in. actual size is shown in photo.

var itemNumber = window.ebayItemID ?

Fastenere #12 x 1-1/4" Pan Head Self Drilling Tek Screws, Full Thread, Phillips Drive, Stainless Steel 410, Bright Finish, Self-Drilling, Quantity 50 Pieces

#8 x (1/2" & 3/4" Length in Listing) Stainless Wafer Head Philips Self Drilling Sheet Metal Tek Screws , Qty 100, 410 Stainless Steel, Modified Truss Head Self Driller (#8 x 1/2 inch) Size Name: 8 x 1/2 inch Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre- drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate.

WELCOME TO WARREN FASTENINGS SOUTH PHONE: 843-554-1322 FAX: 843-554-1562 200pc indented hex washer head self-drilling screws. These zinc plated fasteners are 14 thread size and are 2-1/2" in length with a 3/8" hex.

Pair of dark grey Tektronix knobs (only one pictured) round, 3/4" diameter at base white dot on base 1/2" diameter at top white dot on top rim

Dark grey Tektronix Volts/division knob 1-1/2 inch diameter skirt labeled 50u to 50 in 1/2/5 steps 5/8 inch diameter body Fits a 1/4" shaft Has two hex set screws Probably 5000 series

Dark grey Tektronix time/division knob 1-1/2 inch diameter skirt labeled 20n to 5 in 1/2/5 steps 5/8 inch diameter body Fits a 1/4" shaft Has two hex set screws Probably 5000 series

Dark grey Tektronix Volts/division knob 1-1/8 inch diameter skirt labeled .2m to 100 in 1/2/5 steps 5/8 inch diameter body Recessed top Fits a 1/4" shaft Has two hex set screws

Dark grey Tektronix Volts/division knob 1-1/2 inch diameter skirt labeled 1m to .1k in 1/2/5 steps 5/8 inch diameter body Fits a 1/4" shaft Has two hex set screws Probably 5000 series

Pair of dark grey Tektronix knobs (only one pictured) 3/4" diameter at base with two flutes white line on one flute 1/2" diameter at top fits a 1/4" shaft black top

Dark grey Tektronix Volts/division knob 1-1/2 inch diameter skirt labeled 1m to 50 in 1/2/5 steps 5/8 inch diameter body Fits a 1/4" shaft Has two hex set screws Probably for 5A13

Dark grey Tektronix horizontal (time base) knob 1-1/8 inch diameter skirt labeled 20n to .5 in 1/2/5 steps plus "AMPL" 5/8 inch diameter body Fits a 1/4" shaft Has two hex set screws

#8 x 1 1/2" Indented Hex washer head Self Drilling Screw Zinc Plated- 1000 pcs #8 Metal to metal fastening, used in light gauge framing. Used by metal framing & HVAC contractors/fabricators. Hex Head Diameter- 1/4" Length measured under the head 1 1/2" Drill point- #2 Material thickness- .035- .100 Unit price- .04/pc

2032C4D.1.52 New Self Drilling Screws, Size #14 x 1.5", Zinc Plated, Part Number Unknown. Each bid quantity is for a Lot of Seventy-Five (75) Screws. You may bid / buy any number of lots, up to the total quantity available above.