+ Post new Ad
10 pcs. Sandvik MB-07TH100MM-10R 1025 inserts MB head for thread turning, US $220 – Picture 0
10 pcs. Sandvik MB-07TH100MM-10R 1025 inserts MB head for thread turning, US $220 – Picture 0

10 Pcs. Sandvik Mb-07th100mm-10r 1025 Inserts Mb Head For Thread Turning

US $220

  • Slaskie, Poland
  • Jan 30th
Open on mobile:
QR code
SANDVIK  MB-07TH100MM-10R 1025 inserts / solid carbide heads for thread turning The listing is for 2 packs = 10 pcs. (5 in box):  'FACTORY PACK' dimensions: thread form type = M60 thread pitch = 1.00 mm minimum bore diameter = 10 mm functional length = 3.2 mm; protruding length = 3.8 mm cutting depth max = 0.54 mm functional width = 5.8 mm; right hand grade 1025 (HC) – P30 (P15 - P30), M15 (M10 - M20), S20 (S10 - S20) - PVD coated carbide grade for light milling of steel and stainless steel. In combination with periphery ground inserts, the first choice for sticky and workhardening materials. Suitbale for milling heat resistant super alloys at medium speeds. Good resistance to built-up edge and plastic deformation. I am not an expert on the items I sell. I do my best to represent items as accurately as possible. If you have any questions - contact me. Thank you.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand SANDVIK
Model MB-07TH100MM-10R 1025

Directions

Similar products from Carbide Inserts & Face Mills

ISCAR 10 PCS HM90 ADKT 1505PDR IC908

ISCAR 10 PCS HM90 ADKT 1505PDR IC908

  • Ashdod, default, Israel
  • Jan 30th
SANDVIK VBMT 160404-MF 2025 10 PCS IN BOX

SANDVIK VBMT 160404-MF 2025 10 PCS IN BOX

  • Ashdod, default, Israel
  • Jan 30th
30pcs.SANDVIK 345R-1305M-PH 4230 inserts++FREE SHIPPING++

30pcs.SANDVIK 345R-1305M-PH 4230 inserts++FREE SHIPPING++

  • BG, Serbia
  • Jan 30th
Sandvik N331.1A-08 45 08M- PM Grade 4030 Carbide Milling Insert - 10pcs.

Sandvik N331.1A-08 45 08M- PM Grade 4030 Carbide Milling Insert - 10pcs.

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
ISCAR 10 PCS SNMG 432-TF IC907

ISCAR 10 PCS SNMG 432-TF IC907

  • Ashdod, default, Israel
  • Jan 30th
NEW WORLD PRODUCTS TPK43P2R MP4 (C5 UNCOATED) MILLING CARBIDE INSERTS 10PCS

NEW WORLD PRODUCTS TPK43P2R MP4 (C5 UNCOATED) MILLING CARBIDE INSERTS 10PCS

  • West Chicago, Illinois, United States
  • Jan 30th
ISCAR 10 PCS CNMG 432-PP IC8250

ISCAR 10 PCS CNMG 432-PP IC8250

  • Ashdod, default, Israel
  • Jan 30th
50 pcs. Pramet SPU 845 milling inserts SPUN 250620S 8026T SPUN 845 SPUN 25 06 20

50 pcs. Pramet SPU 845 milling inserts SPUN 250620S 8026T SPUN 845 SPUN 25 06 20

  • Bielsko-Biala, Poland
  • Jan 30th
10 pcs. Sandvik MB-07G200-00-12L 1025 inserts MB head for grooving minimaster

10 pcs. Sandvik MB-07G200-00-12L 1025 inserts MB head for grooving minimaster

  • Slaskie, Poland
  • Jan 30th
100 pcs Iscar TPKN 2204PDTR-42 IC50M milling inserts TPK 432 TPK 433 TPKN 22 04

100 pcs Iscar TPKN 2204PDTR-42 IC50M milling inserts TPK 432 TPK 433 TPKN 22 04

  • Slaskie, Poland
  • Jan 30th
50pcs Sandvik RCKT 16 06 M0-WM 235 milling inserts RCKT 1606M0-WM RCKT 16 06 MO

50pcs Sandvik RCKT 16 06 M0-WM 235 milling inserts RCKT 1606M0-WM RCKT 16 06 MO

  • Slaskie, Poland
  • Jan 30th
5 pcs Sandvik R590-1105H-PC5-NL CD10 diamond tipped inserts milling aluminium

5 pcs Sandvik R590-1105H-PC5-NL CD10 diamond tipped inserts milling aluminium

  • Slaskie, Poland
  • Jan 30th
50 pcs. Sandvik R790-160420PH-NM H13A milling inserts R790-16 04 20PH-NM R790

50 pcs. Sandvik R790-160420PH-NM H13A milling inserts R790-16 04 20PH-NM R790

  • Slaskie, Poland
  • Jan 30th
10 pcs. Sandvik MB-07TH100MM-10L 1025 inserts MB head for thread turning

10 pcs. Sandvik MB-07TH100MM-10L 1025 inserts MB head for thread turning

  • Slaskie, Poland
  • Jan 30th
50 pcs Iscar TPKN 2204PDTR-42 IC50M milling inserts TPK 432 TPK 433 TPKN 22 04

50 pcs Iscar TPKN 2204PDTR-42 IC50M milling inserts TPK 432 TPK 433 TPKN 22 04

  • Slaskie, Poland
  • Jan 30th
100 pcs Pramet SPU 845 milling inserts SPUN 250620S 8026T SPUN 845 SPUN 25 06 20

100 pcs Pramet SPU 845 milling inserts SPUN 250620S 8026T SPUN 845 SPUN 25 06 20

  • Bielsko-Biala, Poland
  • Jan 30th
10 NEW KENNAMETAL LT-16NR 1.0ISO THREADING CARBIDE INSERTS. GRADE: KC5025 {C881}

10 NEW KENNAMETAL LT-16NR 1.0ISO THREADING CARBIDE INSERTS. GRADE: KC5025 {C881}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW 2NU-DGNA 431 SUMITOMO CBN CARBIDE INSERTS. DNGA150404 GRADE: BN250 (D933)

1 NEW 2NU-DGNA 431 SUMITOMO CBN CARBIDE INSERTS. DNGA150404 GRADE: BN250 (D933)

  • Mentor, Ohio, United States
  • Jan 30th
Sandvik Coromant MB-07G100-00-11R 1025 inserts

Sandvik Coromant MB-07G100-00-11R 1025 inserts

  • Clovis, California, United States
  • Jan 30th
10 PIECES TBT123 P2 GRADE 330 CARBOLOY CARBIDE INSERTS NEW

10 PIECES TBT123 P2 GRADE 330 CARBOLOY CARBIDE INSERTS NEW

  • Modesto, California, United States
  • Jan 30th

People who viewed this item also vieved

NICE LOT OF 7 CARBIDE SINGLE AND DOUBLE ENDED END MILLS 13/64 TO 1/2"

NICE LOT OF 7 CARBIDE SINGLE AND DOUBLE ENDED END MILLS 13/64 TO 1/2"

  • Ellington, New York, United States
  • Jan 30th
. HTC TOOL 5/8 4 FLUTE SOLID CARBIDE BALL NOSE SE END MILL, 135-4625

. HTC TOOL 5/8 4 FLUTE SOLID CARBIDE BALL NOSE SE END MILL, 135-4625

  • Pittston, Pennsylvania, United States
  • Jan 30th
Formica laminate cutter, Virutex CO15e

Formica laminate cutter, Virutex CO15e

  • Orlando, Florida, United States
  • Jan 30th
Carbide Tipped Stagger Tooth Cutter 1-1/4" x 7/32 #357100R.30

Carbide Tipped Stagger Tooth Cutter 1-1/4" x 7/32 #357100R.30

  • San Antonio, Texas, United States
  • Jan 30th
Carborundum Abrasives Sanding Belts 4" X 132" Fastcut Resin Cloth 120 Grit 10 pc

Carborundum Abrasives Sanding Belts 4" X 132" Fastcut Resin Cloth 120 Grit 10 pc

  • Guntersville, Alabama, United States
  • Jan 30th
Whitney Metal Tool Co. Imperial Punch No.7 1/2-2 With wall/bench mount

Whitney Metal Tool Co. Imperial Punch No.7 1/2-2 With wall/bench mount

  • Westland, Michigan, United States
  • Jan 30th
#7 taper pin reamer - spiral flute - HSS USA NEW

#7 taper pin reamer - spiral flute - HSS USA NEW

  • Columbus, Ohio, United States
  • Jan 30th
9 Pcs Single Flute HSS Countersink Set, 90 Degree, Ground, #0245-2027

9 Pcs Single Flute HSS Countersink Set, 90 Degree, Ground, #0245-2027

  • Richmond Hill, Ontario, Canada
  • Jan 30th
Steelcraft Tool Co. High Speed Coated Steel Cut-Off Blades STC-87-128 VORA

Steelcraft Tool Co. High Speed Coated Steel Cut-Off Blades STC-87-128 VORA

  • Salt Lake City, Utah, United States
  • Jan 30th
3/8 Double Expansion Shield (50 pieces)

3/8 Double Expansion Shield (50 pieces)

  • Albany, Oregon, United States
  • Jan 30th
TTC Production Ceramic Insert - Grade: AB30, Tool Material: Ceramic

TTC Production Ceramic Insert - Grade: AB30, Tool Material: Ceramic

  • Duncan, South Carolina, United States
  • Feb 12th
TTC Production 49308 Ceramic Insert - Grade: AW20, Tool Material: Ceramic

TTC Production 49308 Ceramic Insert - Grade: AW20, Tool Material: Ceramic

  • Duncan, South Carolina, United States
  • Feb 12th
5pcs 3.175X3.175X15MM One Spiral Single Flute Woodworking Router Bits

5pcs 3.175X3.175X15MM One Spiral Single Flute Woodworking Router Bits

  • SHENZHEN, China
  • Feb 14th
5pcs 3.175X3.175X10MM One Spiral Flute Woodworking Router Bits

5pcs 3.175X3.175X10MM One Spiral Flute Woodworking Router Bits

  • SHENZHEN, China
  • Feb 14th
DuMont Greenfield Broach set --17 pc set -- Kennedy box

DuMont Greenfield Broach set --17 pc set -- Kennedy box

  • Plainfield, Illinois, United States
  • Mar 7th
DUMONT Minute Man Broach Set No. 00

DUMONT Minute Man Broach Set No. 00

  • Brookwood, Alabama, United States
  • Mar 8th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies