+ Post new Ad
10 Ton Dension Multipress., US $22000 – Picture 0
10 Ton Dension Multipress., US $22000 – Picture 0

10 Ton Dension Multipress.

US $22000

  • Grand Rapids, Michigan, United States
  • May 28th
Open on mobile:
QR code
 Denison 10 Ton Model T107MC209S5D268TT1012R.  Serial #23201.  Press is set up with an optional fixture that includes two 2" diameter guide posts. Top bolster is approx. 29" x 8".  Bottom bolster/bed is approx. 22" x 17" (fixture adds a couple of inches).  Approx 23" between the two guide posts LtoR.  Max stroke is 12" and max daylight is 18"; however the fixture limits them to 9" and 14" respectively.  7.5 HP hydraulic system.  Relay controls.  Has been tested.

Directions

Similar products from Tools for Fabrication Equipment

Lockformer Collar Maker

Lockformer Collar Maker

  • Kaukauna, Wisconsin, United States
  • May 28th
MN 1,5mm manual corner notcher

MN 1,5mm manual corner notcher

  • Bursa, default, Turkey
  • May 28th
MN 3mm manual corner notcher

MN 3mm manual corner notcher

  • Bursa, default, Turkey
  • May 28th
NEW Unibor 25128 Diameter Annular Cobalt Cutter..7/8 x 1

NEW Unibor 25128 Diameter Annular Cobalt Cutter..7/8 x 1

  • Eagle Creek, Oregon, United States
  • May 28th
NEW Unibor Diameter Annular Cobalt Cutter.1 1/8 x 2.40

NEW Unibor Diameter Annular Cobalt Cutter.1 1/8 x 2.40

  • Eagle Creek, Oregon, United States
  • May 28th
Amada New Style Hydraulic Clamp Base for Coma and Vipros.

Amada New Style Hydraulic Clamp Base for Coma and Vipros.

  • Pleasant Hill, Missouri, United States
  • May 28th
Amada Clamp Base Assembly for Pega, Vipros, Aries 245, Laser.

Amada Clamp Base Assembly for Pega, Vipros, Aries 245, Laser.

  • Pleasant Hill, Missouri, United States
  • May 28th
PEXTO WHITNEY ROPER 36" FINGER BRAKE BACK GAUGE PX-36

PEXTO WHITNEY ROPER 36" FINGER BRAKE BACK GAUGE PX-36

  • Louisville, Kentucky, United States
  • May 28th
RADIUS NOSE GOOSE NECK UPPER PRESS BRAKE DIES 2 PCS.

RADIUS NOSE GOOSE NECK UPPER PRESS BRAKE DIES 2 PCS.

  • Simi Valley, California, United States
  • May 28th
PEXTO 0581 ROTARY CRIMPER-BEADER 24 GAUGE STEEL CAP. W/BENCH STAND

PEXTO 0581 ROTARY CRIMPER-BEADER 24 GAUGE STEEL CAP. W/BENCH STAND

  • Des Moines, Iowa, United States
  • May 28th
Whitney Hand Hole Punch No.1 With Dies Sheet Metal Tool Fab Shop A/C Machinist

Whitney Hand Hole Punch No.1 With Dies Sheet Metal Tool Fab Shop A/C Machinist

  • Yorktown, Virginia, United States
  • May 28th
10 Ton Bantam Ironworker 8"x1/4"? Flats,3/4"Rds,2"x2"x1/4"Ang. Runs Xtra Nice!!

10 Ton Bantam Ironworker 8"x1/4"? Flats,3/4"Rds,2"x2"x1/4"Ang. Runs Xtra Nice!!

  • Providence, Rhode Island, United States
  • May 28th
1/4" x 10' Cincinnati Mechanical Shear (29113)

1/4" x 10' Cincinnati Mechanical Shear (29113)

  • Cincinnati, Ohio, United States
  • May 28th
5' Lockformer Insulation Cutter Model 60

5' Lockformer Insulation Cutter Model 60

  • Kansas City, Missouri, United States
  • May 28th
RAS 64.30 CNC Folding Machine w/ Multibend 2000 CNC Control

RAS 64.30 CNC Folding Machine w/ Multibend 2000 CNC Control

  • Kansas City, Missouri, United States
  • May 28th
Pexto Sheet Metal Crimper CK Stow & Wilcox Co. 581-1 Forming Tool

Pexto Sheet Metal Crimper CK Stow & Wilcox Co. 581-1 Forming Tool

  • Taunton, Massachusetts, United States
  • May 28th
CHICAGO DREIS & KRUMP 3FT BOX PAN BRAKE 36" FINGER BRAKE BP-314-6

CHICAGO DREIS & KRUMP 3FT BOX PAN BRAKE 36" FINGER BRAKE BP-314-6

  • Louisville, Kentucky, United States
  • May 27th
TUBE BENDER RADIUS BLOCK DIE LEONARD PINES HOSSFELD

TUBE BENDER RADIUS BLOCK DIE LEONARD PINES HOSSFELD

  • Simi Valley, California, United States
  • May 27th
lockformer,pexto,Engel,Tennsmith,Sheetmetal,12"Cleat Bender,Sheet Metal,Drives,

lockformer,pexto,Engel,Tennsmith,Sheetmetal,12"Cleat Bender,Sheet Metal,Drives,

  • Dracut, Massachusetts, United States
  • May 27th
National Metal Shear 16 Gauge x 52" Foot Activated Manual Steel Aluminum Tin

National Metal Shear 16 Gauge x 52" Foot Activated Manual Steel Aluminum Tin

  • Coldiron, Kentucky, United States
  • May 27th

People who viewed this item also vieved

Brown & Sharpe 00A Adjustable Tool Holder, 5/8" shank

Brown & Sharpe 00A Adjustable Tool Holder, 5/8" shank

  • Loudon, New Hampshire, United States
  • Jan 30th
Brown & Sharpe 10A Adjustable Tool Holder, 5/8" shank

Brown & Sharpe 10A Adjustable Tool Holder, 5/8" shank

  • Loudon, New Hampshire, United States
  • Jan 30th
Brown & Sharpe Circular Form Tool Hook Bolt for #2 Screw Machine

Brown & Sharpe Circular Form Tool Hook Bolt for #2 Screw Machine

  • Loudon, New Hampshire, United States
  • Jan 30th
HELICOIL RECOIL THREAD REPAIR KIT 90002 1/4, 5/16, 3/8.

HELICOIL RECOIL THREAD REPAIR KIT 90002 1/4, 5/16, 3/8.

  • Avon, Indiana, United States
  • Jan 30th
Helicoil Thread Repair M6 x 1 Drill and Tap 12 Inserts

Helicoil Thread Repair M6 x 1 Drill and Tap 12 Inserts

  • china, China
  • Jan 30th
FTI COLD EXPANSION Roller Tube SHEETMETAL Aviation/Aircraft Fabrication TOOL Set

FTI COLD EXPANSION Roller Tube SHEETMETAL Aviation/Aircraft Fabrication TOOL Set

  • Virginia Beach, Virginia, United States
  • Jan 30th
Sunnen - GG25-C05 - One Stone Set - 2.5" - 3.3" Diameter - New Old Stock -

Sunnen - GG25-C05 - One Stone Set - 2.5" - 3.3" Diameter - New Old Stock -

  • Lockport, Illinois, United States
  • Jan 30th
Sunnen - MM33-A45 - One Stone Set - 3.3" - 4.2" Diameter - New Old Stock -

Sunnen - MM33-A45 - One Stone Set - 3.3" - 4.2" Diameter - New Old Stock -

  • Lockport, Illinois, United States
  • Jan 30th
Sunnen - NN40-C05 - One Stone Set - 4" - 5.6" Diameter - New Old Stock -

Sunnen - NN40-C05 - One Stone Set - 4" - 5.6" Diameter - New Old Stock -

  • Lockport, Illinois, United States
  • Jan 30th
Mitsui surface grinder Sony Read Out Walker Magnetic Chuck.

Mitsui surface grinder Sony Read Out Walker Magnetic Chuck.

  • Elgin, Illinois, United States
  • Jan 30th
VINCO CORP DIVIDING HEAD FIXTURES WITH PLATES YUASA,HARDINGE

VINCO CORP DIVIDING HEAD FIXTURES WITH PLATES YUASA,HARDINGE

  • Hancock, Wisconsin, United States
  • Jan 30th
DUMORE Tool Post Grinder Dumore #5 1/2 Hp

DUMORE Tool Post Grinder Dumore #5 1/2 Hp

  • Coloma, Wisconsin, United States
  • Jan 30th
SECO LATHE THREADING HOLDER SNAP TAP CER 100 6-26Q

SECO LATHE THREADING HOLDER SNAP TAP CER 100 6-26Q

  • Howell, Michigan, United States
  • Jan 30th
ORIGINAL SOUTH BEND 9" 10K METAL LATHE 32T TOOTH THREADING CHANGE GEAR

ORIGINAL SOUTH BEND 9" 10K METAL LATHE 32T TOOTH THREADING CHANGE GEAR

  • Holmdel, New Jersey, United States
  • Jan 30th
LEBLOND MAKINO ENGINE LATHE 15" x 30" (28438)

LEBLOND MAKINO ENGINE LATHE 15" x 30" (28438)

  • Cincinnati, Ohio, United States
  • Jan 30th
Round Valenite Inserts RNEX 6.30 MM VC2 for 3.0 Face Mill

Round Valenite Inserts RNEX 6.30 MM VC2 for 3.0 Face Mill

  • Ontario, California, United States
  • Jan 30th
SANDVIK CAPTO BORING BAR C5 570 2C 50 073 40R (LOC1243A) TS12

SANDVIK CAPTO BORING BAR C5 570 2C 50 073 40R (LOC1243A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
KOMET 18MM END MILL HOLDER ABS 50 A30 41801 D18 (LOC1243A) TS12

KOMET 18MM END MILL HOLDER ABS 50 A30 41801 D18 (LOC1243A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Northman Hydraulic Power Unit

Northman Hydraulic Power Unit

  • Odessa, Florida, United States
  • Jan 30th
Barker Dual Head Production Mill PM 4"x12" Table w/1/3hp Motors

Barker Dual Head Production Mill PM 4"x12" Table w/1/3hp Motors

  • Minneapolis, Minnesota, United States
  • Jan 30th
Vintage Antique Peck Stow Wilcox Beader Former Roller Sheet Metal Machine

Vintage Antique Peck Stow Wilcox Beader Former Roller Sheet Metal Machine

  • Franksville, Wisconsin, United States
  • Jan 30th
DoAll C4 Horizontal Bandsaw

DoAll C4 Horizontal Bandsaw

  • Minneapolis, Minnesota, United States
  • Jan 30th
Stryco Band Saw Welder MF-2

Stryco Band Saw Welder MF-2

  • Glendora, California, United States
  • Jan 30th
3R system - expandable dowel

3R system - expandable dowel

  • Timberlea, NS, Canada
  • Feb 13th
Setup Indexer w/ System 3R EDM Electrode Holder Chuck For 20mm Shank Tooling

Setup Indexer w/ System 3R EDM Electrode Holder Chuck For 20mm Shank Tooling

  • Lake Zurich, Illinois, United States
  • Feb 13th
Hermann Schmidt Precision Magnetic Chuck, 5" X 2.5" X 2.5", Used With System 3R

Hermann Schmidt Precision Magnetic Chuck, 5" X 2.5" X 2.5", Used With System 3R

  • Lake Zurich, Illinois, United States
  • Feb 13th
WELLSAW BANDSAW, Model 1318

WELLSAW BANDSAW, Model 1318

  • Grand Prairie, Texas, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies