10a 250/600w Step Up Dc Boost Converter Constant Current Power Supply Led Driver

US $130

ShenZhen, China
Jun 7th

Open on mobile:
QR code

Home Payment Shipping About us Contact us Store CategoriesStore Categories Other Details 250W 10A Step up Converter Descriptions: Module name :250W boost constant current module Module properties: non-isolated step-up module (BOOST) Input voltage: DC8.5V-48V Input current: 10A (MAX) exceeds 8A please enhance heat dissipation Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet) Output voltage: 10-50V continuously adjustable Constant] range: 0.2-8A Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation) Operating frequency: 150KHz Conversion efficiency: up to 96% Overcurrent protection: There Input reverse polarity protection: Yes, Installation: 4 3mm screw holes Connection method: Connection Output Module size: Length 70mm width 36mm height 13mm Single module: 50 g Applications: 1, DIY a power supply, 12V can input and output can 12-50V adjustable. 2, the power supply for your electronic device, according to your system can set the output voltage value. 3, as the car power supply for your laptop, PDA or a variety of digital products supply. 4, DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books. 5, solar panel regulator. 6, to the battery, rechargeable lithium batteries. 7, driving high-power LEDlights. Package Included: 1 x DC DC boost converter Constant Current Mobile Power supply 10A 250W LED Driver 250W 10A Step up Converter Description Module name: 600W boost constant current module Module Properties: Non-Isolated Boost Module (BOOST) Input voltage: DC10V-60V Input current: 10 (MAX) Static operating current: 10mA (12V 20V, the higher the output voltage, static too much) Output voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers) Output current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current) Constant current range: 0.2-10A Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W, Operating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high) Operating frequency: 150KHz Conversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure) Input reverse protection: No (Note that forward and reverse are not reversed) Installation: 4 3mm screw holes Wiring method: wiring output Module size: length 85mm width 52mm height 21mm Module weight: 80 grams the output voltage regulation: 1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation: 2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.) Note: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit. Package Included: 1 x 600W 10A DC Converter Step-up Boost Constant Current Power Supply LED Driver 3.3V 3.7V 5V 6V to 12V Step up Features: Input voltage 3~6V, output 12V Maximum input current : 1.2A Long-term work Current : 1A Conversion efficiency : 80-90% 1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A. But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 . The power MOSFET wake up when the junction emperature drops 30 under the OTP threshold temperature Start Voltage 2.8V, Output Current 50MA Input 3V 1A; Output 12V 220MA Input 3.3V 1A; Output 12V 250MA Input 3.7V 1A; Output 12V 280MA Input 4.5V 1A; Output 12V 340MA Input 5V 1A; Output 12V 370MA Input 6V 1A; Output 12V 450MA DC-DC Boost module working frequency 1.0MHZ. Operating ambient temperature : -40~+85 Degrees Celsius 2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA/CPLD Development Board friendly. Applications: MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc PLC Modbus RS485 VCR PDA LED Lighting 12V Relay board Wireless communication equipment 315M 433M Wireless remote controller Size(not include pin):(L*W) 2.05*1.00cm/0.81"*0.39"(Approx.) Attention : This is a DC-DC voltage converter module,Must be noted when using: 1 Input voltage can not be greater than the maximum input range 2 Output powercan not be greater than the maximum load for a long time 3 Input power must be greater than the output power, because the power consumption of the module itself Package Include : 1 x DC 3.3V 3.7V 5V 6V to 12V Step-up Power Supply Boost Voltage Regulator Converter Shipping Policy Payment Method Returns Policy Shipping Policy We only accept your Ebay Address,Please Make sure it's 100% right. The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor negative feedback, so that we can satisfactorily address your concerns. Payment Method Returns Policy copyright © 2018 datacaciques Home Payment Shipping About us Contact us Home Payment Shipping About us Contact us Details 250W 10A Step up Converter Descriptions: Module name :250W boost constant current module Module properties: non-isolated step-up module (BOOST) Input voltage: DC8.5V-48V Input current: 10A (MAX) exceeds 8A please enhance heat dissipation Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet) Output voltage: 10-50V continuously adjustable Constant] range: 0.2-8A Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation) Operating frequency: 150KHz Conversion efficiency: up to 96% Overcurrent protection: There Input reverse polarity protection: Yes, Installation: 4 3mm screw holes Connection method: Connection Output Module size: Length 70mm width 36mm height 13mm Single module: 50 g Applications: 1, DIY a power supply, 12V can input and output can 12-50V adjustable. 2, the power supply for your electronic device, according to your system can set the output voltage value. 3, as the car power supply for your laptop, PDA or a variety of digital products supply. 4, DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books. 5, solar panel regulator. 6, to the battery, rechargeable lithium batteries. 7, driving high-power LEDlights. Package Included: 1 x DC DC boost converter Constant Current Mobile Power supply 10A 250W LED Driver 250W 10A Step up Converter Description Module name: 600W boost constant current module Module Properties: Non-Isolated Boost Module (BOOST) Input voltage: DC10V-60V Input current: 10 (MAX) Static operating current: 10mA (12V 20V, the higher the output voltage, static too much) Output voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers) Output current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current) Constant current range: 0.2-10A Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W, Operating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high) Operating frequency: 150KHz Conversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure) Input reverse protection: No (Note that forward and reverse are not reversed) Installation: 4 3mm screw holes Wiring method: wiring output Module size: length 85mm width 52mm height 21mm Module weight: 80 grams the output voltage regulation: 1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation: 2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.) Note: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit. Package Included: 1 x 600W 10A DC Converter Step-up Boost Constant Current Power Supply LED Driver 3.3V 3.7V 5V 6V to 12V Step up Features: Input voltage 3~6V, output 12V Maximum input current : 1.2A Long-term work Current : 1A Conversion efficiency : 80-90% 1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A. But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 . The power MOSFET wake up when the junction emperature drops 30 under the OTP threshold temperature Start Voltage 2.8V, Output Current 50MA Input 3V 1A; Output 12V 220MA Input 3.3V 1A; Output 12V 250MA Input 3.7V 1A; Output 12V 280MA Input 4.5V 1A; Output 12V 340MA Input 5V 1A; Output 12V 370MA Input 6V 1A; Output 12V 450MA DC-DC Boost module working frequency 1.0MHZ. Operating ambient temperature : -40~+85 Degrees Celsius 2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA/CPLD Development Board friendly. Applications: MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc PLC Modbus RS485 VCR PDA LED Lighting 12V Relay board Wireless communication equipment 315M 433M Wireless remote controller Size(not include pin):(L*W) 2.05*1.00cm/0.81"*0.39"(Approx.) Attention : This is a DC-DC voltage converter module,Must be noted when using: 1 Input voltage can not be greater than the maximum input range 2 Output power can not be greater than the maximum load for a long time 3 Input power must be greater than the output power, because the power consumption of the module itself Package Include : 1 x DC 3.3V 3.7V 5V 6V to 12V Step-up Power Supply Boost Voltage Regulator Converter Shipping Policy Payment Method Returns Policy Shipping Policy We only accept your Ebay Address,Please Make sure it's 100% right. The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor negative feedback, so that we can satisfactorily address your concerns. Payment Method We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. Returns Policy We believe our items are so outstanding. We are convinced you will be happy with your Purchase. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse. Please include your eBay ID and item number with any email requests.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded/Generic
EAN	Does Not Apply
MPN	Does not apply
Herstellungsland und -region	China
Country/Region of Manufacture	China
Produktart	Aufwrtswandler
select	3.3V 3.7V 5V 6V to 12V Step up
Country//Region of Manufacture	China
UPC	Does Not Apply
Value	10A 8.5~48V to 10~50V
ISBN	Does Not Apply