+ Post new Ad
10MM X 75MM 4-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 1x, US $170 – Picture 0
10MM X 75MM 4-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 1x, US $170 – Picture 0

10mm X 75mm 4-flute Hrc45 Center Cutting Altin/tiain Carbide Flat Endmill 1x

US $170

  • --, Hong Kong
  • Oct 26th
Open on mobile:
QR code
10MM X 75MM 4-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 1x MATERIAL : MICRO-GRAIN SOLID CARBIDE COATING : AlTiN/TiAIN SUITABLE TO CUT WORK-PIECES HARDNESS BELOW HRC45 4-FLUTE END TYPE : FLAT / SQUARE CENTER CUTTING HELIX : 35° RIGHT HAND UP CUT CUTTER SIZE : 10MMFLUTE LENGTH : 25MM TOTAL LENGTH : 75MM SHANK DIAMETER : 10MM PACKING :  ONE PC IN ONE BOX WE SHIP WORLDWIDE. BY E-PACKET OR AIR MAIL. PROVIDE TAILOR MADE ENDMILL. MAKE ACCORDING TO CUSTOMER REQUEST. NO ADVANCE PAYMENT REQUIRE. PAY JUST BEFORE SHIPMENT. THANK YOU FOR ATTENTION.

Directions

Similar products from End Mills Router & Drill Bits

HSS 4Flute Ballnose End Mills R14 Cutting Dia 28mm Length 121mm Ball End mills

HSS 4Flute Ballnose End Mills R14 Cutting Dia 28mm Length 121mm Ball End mills

  • CN, China
  • Oct 27th
HSS 4Flute Ballnose End Mills R16 Cutting Dia 32mm Length 121mm Ball End mills

HSS 4Flute Ballnose End Mills R16 Cutting Dia 32mm Length 121mm Ball End mills

  • CN, China
  • Oct 27th
HSS 4Flute Ballnose End Mills R13 Cutting Dia 26mm Length 121mm Ball End mills

HSS 4Flute Ballnose End Mills R13 Cutting Dia 26mm Length 121mm Ball End mills

  • CN, China
  • Oct 27th
HSS 4Flute Ballnose End Mills R15 Cutting Dia 30mm Length 121mm Ball End mills

HSS 4Flute Ballnose End Mills R15 Cutting Dia 30mm Length 121mm Ball End mills

  • CN, China
  • Oct 27th
LMT-ONSRUD CARBIDE END MILL 1" DIAMETER 1.25 LOC 5" OAL STK 10231Z

LMT-ONSRUD CARBIDE END MILL 1" DIAMETER 1.25 LOC 5" OAL STK 10231Z

  • Wadley, Alabama, United States
  • Oct 27th
NIAGARA 92203 - 5/8" Endmill - 5/8" Shank - HSS - 2 FLT SE Weldon Flat - UNUSED

NIAGARA 92203 - 5/8" Endmill - 5/8" Shank - HSS - 2 FLT SE Weldon Flat - UNUSED

  • Lakeland, Florida, United States
  • Oct 26th
NIAGARA 92244 - 3/4" Endmill - 3/4" Shank - HSS - 2 FLT SE Weldon Flat - UNUSED

NIAGARA 92244 - 3/4" Endmill - 3/4" Shank - HSS - 2 FLT SE Weldon Flat - UNUSED

  • Lakeland, Florida, United States
  • Oct 26th
NIAGARA 30244 - 3/4" Endmill - 3/4" Shank - HSS - 3 FLT SE Weldon Flat - UNUSED

NIAGARA 30244 - 3/4" Endmill - 3/4" Shank - HSS - 3 FLT SE Weldon Flat - UNUSED

  • Lakeland, Florida, United States
  • Oct 26th
NIAGARA 90223 - 11/16" Endmill - 5/8" Shnk - HSS - 2 FLT SE Weldon Flat - UNUSED

NIAGARA 90223 - 11/16" Endmill - 5/8" Shnk - HSS - 2 FLT SE Weldon Flat - UNUSED

  • Lakeland, Florida, United States
  • Oct 26th
(2) NIAGARA 28244 - 3/4" Endmills - 3/4" Shank - HSS - 2 FLT DE Weldon - UNUSED

(2) NIAGARA 28244 - 3/4" Endmills - 3/4" Shank - HSS - 2 FLT DE Weldon - UNUSED

  • Lakeland, Florida, United States
  • Oct 26th
1/2" 3 Flute Carbide End Mill 1-1/4"LOC 45°Helix for Aluminum YG-1 5pcs

1/2" 3 Flute Carbide End Mill 1-1/4"LOC 45°Helix for Aluminum YG-1 5pcs

  • Farmington, Minnesota, United States
  • Oct 26th
2 4 flute 1/2" carbide end mills

2 4 flute 1/2" carbide end mills

  • Pilot, Virginia, United States
  • Oct 26th
Union Butterfield 1-1/8" x 4.25" Sq. Nose End Mill, 30° Helix, 2 Flute 5110324

Union Butterfield 1-1/8" x 4.25" Sq. Nose End Mill, 30° Helix, 2 Flute 5110324

  • Salt Lake City, Utah, United States
  • Oct 26th
10 NEW 6 MM SHANK CARBIDE END MILLS. 4 FLUTE. CUT DIA MAY VARY. USA MADE {J645}

10 NEW 6 MM SHANK CARBIDE END MILLS. 4 FLUTE. CUT DIA MAY VARY. USA MADE {J645}

  • Mentor, Ohio, United States
  • Oct 25th
4 NEW 8 MM SHANK CARBIDE END MILLS. 3 FLUTE. CUT DIA MAY VARY. USA MADE {J639}

4 NEW 8 MM SHANK CARBIDE END MILLS. 3 FLUTE. CUT DIA MAY VARY. USA MADE {J639}

  • Mentor, Ohio, United States
  • Oct 25th
5 NEW USA 3/16" DIAMETER CARBIDE END MILLS. 4 FLUTE. 3/16" SHANK. USA MADE E268

5 NEW USA 3/16" DIAMETER CARBIDE END MILLS. 4 FLUTE. 3/16" SHANK. USA MADE E268

  • Mentor, Ohio, United States
  • Oct 25th
8 NEW 6 MM SHANK CARBIDE END MILLS. 4 FLUTE. BALL. CUT DIA MAY VARY. USA {J666A}

8 NEW 6 MM SHANK CARBIDE END MILLS. 4 FLUTE. BALL. CUT DIA MAY VARY. USA {J666A}

  • Mentor, Ohio, United States
  • Oct 25th
NIAGARA 4FL TiCN End Mills. Lot Of 12. 6-1/2 X 1 Flute And 6-3/8 X 1 3/4 Flute

NIAGARA 4FL TiCN End Mills. Lot Of 12. 6-1/2 X 1 Flute And 6-3/8 X 1 3/4 Flute

  • Cleveland, Ohio, United States
  • Oct 25th
(Machinist Lot of 4) 3/4" HTC Carbide TiALN 4FL End Mill *NR* (AAA 213)

(Machinist Lot of 4) 3/4" HTC Carbide TiALN 4FL End Mill *NR* (AAA 213)

  • Dallas, Texas, United States
  • Oct 25th
3/8" OSG Solid Carbide TiALN 4 Flute End Mill (R 386)

3/8" OSG Solid Carbide TiALN 4 Flute End Mill (R 386)

  • Dallas, Texas, United States
  • Oct 25th

People who viewed this item also vieved

Dumont 3/4-E Broach

Dumont 3/4-E Broach

  • Garden City, Idaho, United States
  • Jan 30th
THREADWELL TAP & DIE COMPANY - LITTLE CHAMP KEYWAY BROACH SET #10

THREADWELL TAP & DIE COMPANY - LITTLE CHAMP KEYWAY BROACH SET #10

  • Waverly, Iowa, United States
  • Jan 30th
10 NEW VALENITE CARBIDE INSERTS SEHN-53-AFSN V1N

10 NEW VALENITE CARBIDE INSERTS SEHN-53-AFSN V1N

  • Wadley, Alabama, United States
  • Jan 30th
VALENITE VALTURN PRO-GRIP TURNING INDEXABLE TOOLHOLDER - #DCLNR-16-4D

VALENITE VALTURN PRO-GRIP TURNING INDEXABLE TOOLHOLDER - #DCLNR-16-4D

  • Covina, California, United States
  • Jan 30th
Valenite VC55 TNG 443 Inserts 5pc.

Valenite VC55 TNG 443 Inserts 5pc.

  • Ocala, Florida, United States
  • Jan 30th
SNG 434 A Grade Q32 Ceramic Inserts VALENITE 10pcs

SNG 434 A Grade Q32 Ceramic Inserts VALENITE 10pcs

  • Trenton, Michigan, United States
  • Jan 30th
SGTBN-88-250 Cut-Off Tool Block w/1pc 3/16" Width x 1" Height x 8" OAL Cut-Off

SGTBN-88-250 Cut-Off Tool Block w/1pc 3/16" Width x 1" Height x 8" OAL Cut-Off

  • Trenton, Michigan, United States
  • Jan 30th
LOT OF 3 BRAND NEW SOLID STRAIGHT FLUTE COUNTERBORES FOR #8 SCREWS , 3 FLUTE

LOT OF 3 BRAND NEW SOLID STRAIGHT FLUTE COUNTERBORES FOR #8 SCREWS , 3 FLUTE

  • Port Richey, Florida, United States
  • Jan 30th
3/8 in. Number Set, Steel Hand Stamps - Premier HD Series - (9) Pieces # 1F108

3/8 in. Number Set, Steel Hand Stamps - Premier HD Series - (9) Pieces # 1F108

  • Highlands, Texas, United States
  • Jan 30th
XL H&H Die Manufacturing jacket Drop Forge Die Sinking anvil metal working

XL H&H Die Manufacturing jacket Drop Forge Die Sinking anvil metal working

  • Saint John, Indiana, United States
  • Jan 30th
5/16 & 7/16 HAND REAMERS HSS

5/16 & 7/16 HAND REAMERS HSS

  • Mansfield, Ohio, United States
  • Jan 30th
TAPER PIN REAMER NO 5 SIZE/NUMBER HIGH SPEED STEEL SPIRAL FLUTE NEW USA $13.75

TAPER PIN REAMER NO 5 SIZE/NUMBER HIGH SPEED STEEL SPIRAL FLUTE NEW USA $13.75

  • North Tonawanda, New York, United States
  • Jan 30th
Greenlee Band Saw

Greenlee Band Saw

  • Bristol, Connecticut, United States
  • Jan 30th
MILWAUKEE HACKSAW BLADES 10" SET - VINTAGE MADE IN THE USA! 48-43-0120

MILWAUKEE HACKSAW BLADES 10" SET - VINTAGE MADE IN THE USA! 48-43-0120

  • Gresham, Oregon, United States
  • Jan 30th
CARBIDE TOOL BIT BOX LOT, 1/2, 5/16 & 1/4", Carboloy, Super Morse, Others, NR!

CARBIDE TOOL BIT BOX LOT, 1/2, 5/16 & 1/4", Carboloy, Super Morse, Others, NR!

  • Belmont, Massachusetts, United States
  • Jan 30th
1 1/2 x 1 1/2 insert tool lathe ,boring mill

1 1/2 x 1 1/2 insert tool lathe ,boring mill

  • Phillipsburg, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies