10x KSD301 NC 95°C Thermostat, Temperature Switch, Normally Close., US $8.00 – Picture 0

10x KSD301 NC 95°C Thermostat, Temperature Switch, Normally Close., US $8.00 – Picture 1

10x Ksd301 Nc 95°c Thermostat, Temperature Switch, Normally Close.

US $8.00

Hong Kong, Hong Kong
Mar 6th

Open on mobile:
QR code

The KSD301 NC 95В°C Thermostat is a temperature switch that is normally closed. This thermostat is part of the KSD301 series and comes in a lot of 10 pieces. It has an action temperature of 95 +/-3 degrees Celsius and a reset temperature of 80 +/-5 degrees Celsius. The type of action that this thermostat uses is N.C., or normally close, meaning that it is connected in normal conditions. If you plan to install the KSD301 NC 95В°C Thermostat, there are a few precautions you should keep in mind. First, make sure the cap is firmly attached to the installation surface of the controlled appliance during installation. Additionally, wipe conduction silicon grease onto the sensing surface to ensure accurate temperature sensing. Do not collapse, loosen, or deform the top of the cover surface during installation as this could affect its performance. Never infiltrate any liquid into the thermostat, over-pressurize or crack the shell, or change the shape of the exterior wiring terminal. For products used in circuits with no more than 5A current, choose the lead with a cross-section surface of copper core within 0.5-1mm2 for connection. For those used in circuits with no more than 10A current, choose the lead with a cross-section surface of copper core within 0.75-1.5mm for connection. Finally, keep the product in a clean, dry warehouse with good ventilation and free of corrosive gas, with relative humidity less than 90% and an ambient temperature below 40C. The KSD301 thermostat uses a bimetal disc as its temperature sensing element. When an electrical appliance is working in normal conditions, the bimetal disc is in a free state and the contacts of the thermostat are closed. However, when the ambient temperature increases to the preset operating temperature, the bimetal disc deforms and jumps when heated. The contacts then open, cutting off the circuit to control the temperature. When the electrical appliance cools down to the reset temperature, the contacts will automatically close and cut on the circuit. This product is widely used in various appliances, such as water dispensers, electrical water boilers, disinfecting cabinets, electrical heating vacuum flasks, electrical coffee makers, rice cookers, air conditioners, and more. It has stabilized performance, high precision temperature controlling, small bulk, light weight, high reliability, and little interference to wireless.