+ Post new Ad
11.81" x 22.5" 4 SIDED TOMBSTONE, 19.5" x 19.5" (500 MM x 500 MM) BASE, US $1300 – Picture 0
11.81" x 22.5" 4 SIDED TOMBSTONE, 19.5" x 19.5" (500 MM x 500 MM) BASE, US $1300 – Picture 0

11.81" X 22.5" 4 Sided Tombstone, 19.5" X 19.5" (500 Mm X 500 Mm) Base

US $1300

  • Waukesha, Wisconsin, United States
  • Jun 5th
Open on mobile:
QR code
 WISCONSIN METALWORKING MACHINERY FOR MORE INFO AND PHOTOS VISIT TOMBSTONE ID#9873 Specifications: GENERAL SPECIFICATIONS: FACE DIMENSIONS (4 SIDED)... 11.81" X 22.5" H FACE THICKNESS.............. 1.75" BASE DIMENSIONS............. 19.5" X 19.5" (500 MM) TOTAL HEIGHT................ 25.25" EQUIPPED WITH: DRILLED AND TAPPED HOLES. CAST IRON SPECIFICATIONS SUBJECT TO VERIFICATION CONDITIONS OF SALE TERMS: Cash or check with order, unless otherwise stated. WARRANTY:  The goods described herein are pre-owned used goods and are offered "as is", "where is" unless otherwise noted herein, SELLER MAKES NO WARRANTIES OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, OR MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  All specifications and description of said goods are approximate only.  It is the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer's requirements. MACHINE USE AND SAFETY:  Buyer acknowledges that the goods described herein are preowned used GOODS WHICH WERE NEITHER DESIGNED NOR MANUFACTURED BY THE seller, nor has the Seller knowledge of,  or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer.  It is the Buyer's (user's) responsibility to provide proper safety devices, equipment and instructions for any particular use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA. INDEMNIFICATION:  Buyer agrees to indemnify, hold harmless and defend Seller of and from any and all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.

Directions

Similar products from Fittings & Plates

SUBURBAN SM-5C 5C SPIN MASTER INDEX FIXTURE

SUBURBAN SM-5C 5C SPIN MASTER INDEX FIXTURE

  • Duncan, South Carolina, United States
  • Jun 6th
Angle Plate; 12x4x5 (CTAM 9601)

Angle Plate; 12x4x5 (CTAM 9601)

  • Sicklerville, New Jersey, United States
  • Jun 6th
Angle Plate; Taft-Peirce (CTAM 9612)

Angle Plate; Taft-Peirce (CTAM 9612)

  • Sicklerville, New Jersey, United States
  • Jun 6th
Angle Plate; Taft-Peirce (CTAM 9613)

Angle Plate; Taft-Peirce (CTAM 9613)

  • Sicklerville, New Jersey, United States
  • Jun 6th
MACHINIST ANGLE BLOCK , SET UP BLOCK

MACHINIST ANGLE BLOCK , SET UP BLOCK

  • Berlin, Connecticut, United States
  • Jun 6th
Acorn welding table 5x5

Acorn welding table 5x5

  • Gustine, California, United States
  • Jun 6th
Suburban 6" x 6" x 4-5/8" Standard Pole Magnetic SineSet System MSP-66-S1

Suburban 6" x 6" x 4-5/8" Standard Pole Magnetic SineSet System MSP-66-S1

  • Venice, Florida, United States
  • Jun 5th
48" x 31.25" x 6" Steel Welding T-Slotted Table Cast iron Layout Plate 5 T-Slot

48" x 31.25" x 6" Steel Welding T-Slotted Table Cast iron Layout Plate 5 T-Slot

  • Grand Rapids, Michigan, United States
  • Jun 5th
48" x 31.25" x 6" Steel Welding T-Slotted Table Cast iron Layout Plate

48" x 31.25" x 6" Steel Welding T-Slotted Table Cast iron Layout Plate

  • Grand Rapids, Michigan, United States
  • Jun 5th
48" x 31-1/4" x 6" Steel Welding 5 T-Slotted Table Cast iron Layout Plate _JIG

48" x 31-1/4" x 6" Steel Welding 5 T-Slotted Table Cast iron Layout Plate _JIG

  • Grand Rapids, Michigan, United States
  • Jun 5th
Hardinge fixture plate, 7 inch dia, c26 with taper mount and locating pin.

Hardinge fixture plate, 7 inch dia, c26 with taper mount and locating pin.

  • Milford, Connecticut, United States
  • Jun 5th
ANGLE BLOCK MACHINIST TOOL LATHE

ANGLE BLOCK MACHINIST TOOL LATHE

  • Lompoc, California, United States
  • Jun 5th
BEMISINE,ADJUSTABLE SINE PLATE , 3 1/2" x 4"

BEMISINE,ADJUSTABLE SINE PLATE , 3 1/2" x 4"

  • Berlin, Connecticut, United States
  • Jun 5th
NICE ELLIS DIVIDING HEAD W/ 4" BUCK SET TRU CHUCK + EXTRAS PLATES

NICE ELLIS DIVIDING HEAD W/ 4" BUCK SET TRU CHUCK + EXTRAS PLATES

  • Glendora, California, United States
  • Jun 5th
HOLLINGSWORTH Pneumatic Crimp Tool Model 28-BAFC with Foot Pedal

HOLLINGSWORTH Pneumatic Crimp Tool Model 28-BAFC with Foot Pedal

  • New Berlin, Wisconsin, United States
  • Jun 5th
MILL BRIDGEPORT VICE STOP LOC1915

MILL BRIDGEPORT VICE STOP LOC1915

  • Sidney, Ohio, United States
  • Jun 5th
ADJUSTABLE PART STOP LOC1916

ADJUSTABLE PART STOP LOC1916

  • Sidney, Ohio, United States
  • Jun 5th
T-Slotted Floor Plate T Slot Fabrication Workholding Fixture Table 4' X 16'

T-Slotted Floor Plate T Slot Fabrication Workholding Fixture Table 4' X 16'

  • Findlay, Ohio, United States
  • Jun 5th
T-Slotted Floor Plate T Slot Machining Workholding Fixture Table 3'x10'

T-Slotted Floor Plate T Slot Machining Workholding Fixture Table 3'x10'

  • Findlay, Ohio, United States
  • Jun 5th
48.75" x 31" x 4" Steel Weld T-Slotted Table Cast iron Layout Plate Jig Weld

48.75" x 31" x 4" Steel Weld T-Slotted Table Cast iron Layout Plate Jig Weld

  • Grand Rapids, Michigan, United States
  • Jun 5th

People who viewed this item also vieved

MACHINIST LATHE MILL Lot of Live Center s for Lathe

MACHINIST LATHE MILL Lot of Live Center s for Lathe

  • Morris Plains, New Jersey, United States
  • Jan 30th
Rockwell lathe centers&safty type dogs

Rockwell lathe centers&safty type dogs

  • Bristol, New Hampshire, United States
  • Jan 30th
ORIGINAL ATLAS CRAFTSMAN 6" MT1 LIVE CENTER METAL LATHE MACHINIST TOOL

ORIGINAL ATLAS CRAFTSMAN 6" MT1 LIVE CENTER METAL LATHE MACHINIST TOOL

  • Holmdel, New Jersey, United States
  • Jan 30th
8" 4-Jaw Self-Centering Lathe Chuck w. top&bottom jaws-0.003" TIR #K12-200C-new

8" 4-Jaw Self-Centering Lathe Chuck w. top&bottom jaws-0.003" TIR #K12-200C-new

  • Madison Heights, Michigan, United States
  • Jan 30th
5C Collet Chuck for Lathe (Cam Lock D1-6)-New

5C Collet Chuck for Lathe (Cam Lock D1-6)-New

  • Chino, California, United States
  • Jan 30th
6"X18" PERMANENT MAGNETIC CHUCK /FINE POLE #PMC-F618 - NEW

6"X18" PERMANENT MAGNETIC CHUCK /FINE POLE #PMC-F618 - NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
VERTICAL STRAIGHT BASE TOGGLE CLAMP WITH U-BAR (3900-0342)

VERTICAL STRAIGHT BASE TOGGLE CLAMP WITH U-BAR (3900-0342)

  • Chino, California, United States
  • Jan 30th
VERTICAL FLANGED BASE TOGGLE CLAMP WITH U-BAR (3900-0341)

VERTICAL FLANGED BASE TOGGLE CLAMP WITH U-BAR (3900-0341)

  • Chino, California, United States
  • Jan 30th
Hargrave Forged Steel C-Clamp, 10" Opening, 6" Depth (40B)

Hargrave Forged Steel C-Clamp, 10" Opening, 6" Depth (40B)

  • Saint Louis, Missouri, United States
  • Jan 30th
New SELUX BT30-ER20-70L Collet Chuck CNC Milling Tool-Holder

New SELUX BT30-ER20-70L Collet Chuck CNC Milling Tool-Holder

  • New Britain, Connecticut, United States
  • Jan 30th
KENNAMETAL MAX TORQUE NPA-150 CHUCK TOOLS CV40TG150488 GOOD CONDITION

KENNAMETAL MAX TORQUE NPA-150 CHUCK TOOLS CV40TG150488 GOOD CONDITION

  • Greensburg, Indiana, United States
  • Jan 30th
Shars Clamping Hex Nut for CAT, BT,40/50 ER Stub Nose Rigid Holders New

Shars Clamping Hex Nut for CAT, BT,40/50 ER Stub Nose Rigid Holders New

  • Saint Charles, Illinois, United States
  • Jan 30th
HARDINGE & OTHER BRAND 4NS COLLETS FIT GORTON UNIVERSAL TOOL CUTTER GRINDER

HARDINGE & OTHER BRAND 4NS COLLETS FIT GORTON UNIVERSAL TOOL CUTTER GRINDER

  • La Puente, California, United States
  • Jan 30th
Duct tape

Duct tape

  • Alexandria, Virginia, United States
  • Jan 30th
10 ASSORTED 5C MACHINABLE / EMERGENCY COLLETS 7 w/ INTERNAL THREADS

10 ASSORTED 5C MACHINABLE / EMERGENCY COLLETS 7 w/ INTERNAL THREADS

  • Covina, California, United States
  • Jan 30th
Browning 50P20 X 1 7/8 Sprocket 1 7/8" Bore with 3/8" keyway - NEW

Browning 50P20 X 1 7/8 Sprocket 1 7/8" Bore with 3/8" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Unknown 50B19 X 1 7/8 Sprocket 1 7/8" Bore

Unknown 50B19 X 1 7/8 Sprocket 1 7/8" Bore

  • Bay City, Michigan, United States
  • Jan 30th
Unknown Sprocket 41B24 X 1 3/4" Bore with 3/8" keyway - NEW

Unknown Sprocket 41B24 X 1 3/4" Bore with 3/8" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
High Quality CNC machine 4thAxis (A Axis,rotation axis)+tailstock for CNC router

High Quality CNC machine 4thAxis (A Axis,rotation axis)+tailstock for CNC router

  • Shenzhen, China
  • Jan 30th
NICE! TROYKE 12" VERTICAL HORIZONTAL ROTARY TABLE MODEL #U-12

NICE! TROYKE 12" VERTICAL HORIZONTAL ROTARY TABLE MODEL #U-12

  • Chino, California, United States
  • Jan 30th
HAAS 5C CONTROLLER 7 PIN CNC MILL ROTARY CONTROL INDEXER BLACK

HAAS 5C CONTROLLER 7 PIN CNC MILL ROTARY CONTROL INDEXER BLACK

  • Santa Clarita, California, United States
  • Jan 30th
CLEAN! KURT FIXTURE 6" x 1-1/2" MILLING MILL MACHINE VISE FOR BRIDGEPORT - #DU68

CLEAN! KURT FIXTURE 6" x 1-1/2" MILLING MILL MACHINE VISE FOR BRIDGEPORT - #DU68

  • Chino, California, United States
  • Jan 30th
NEW DIAMOND WHEEL BRAKE TRUING DRESSER

NEW DIAMOND WHEEL BRAKE TRUING DRESSER

  • Columbus, Ohio, United States
  • Jan 30th
Yost No.1D Drill Press Machine Vise Made in Meadville PA USA

Yost No.1D Drill Press Machine Vise Made in Meadville PA USA

  • Tuttle, Oklahoma, United States
  • Jan 30th
L.S. STARRETT NO.568 V-BLOCK AND CLAMP

L.S. STARRETT NO.568 V-BLOCK AND CLAMP

  • Newport, Maine, United States
  • Feb 13th
VINTAGE WEBBER MICRO ACCURATE GAGES - MACHINIST METAL BLOCKS - W/ CASE

VINTAGE WEBBER MICRO ACCURATE GAGES - MACHINIST METAL BLOCKS - W/ CASE

  • United States
  • Feb 13th
Vintage Brown & Sharp 640 "22" Blade Thickness Gauge Set Providence, RI USA

Vintage Brown & Sharp 640 "22" Blade Thickness Gauge Set Providence, RI USA

  • Etowah, North Carolina, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies