11 Kv High Voltage High Current Nanosecond Pulse Generator System

US $800

Santa Fe, New Mexico, United States
Jun 1st

Open on mobile:
QR code

11 kV High Voltage High Current Nanosecond Pulse Generator System Includes BDM SN/SPG-400 High Voltage Pulse Generator Gamma RR30-5R Dual Polarity High Voltage Power Supply Reynolds 167-4534 to HN female adapter cable Reynolds 167-3516 to N female adapter cable Cables for connecting high voltage power supply to pulse generator One 20 ns 50 Ohm transmission line One 40 ns 50 Ohm transmission line Two 100 ns 50 Ohm transmission lines One 500 ns 50 Ohm transmission line One 40 ns 25 Ohm transmission line User manuals Click Here to Download Test Report The Braddock, Dunn, and McDonald SN/SPG-400 transmission line pulse generator is a versatile, field-proven, general purpose pulse-generator designed to produce high-voltage, fast risetime pulses up to 11 kV into 50 Ohms for use in the pulse testing of electronic components, circuits, and systems. The SN/SPG-400 instrument operates by charging a known length of coaxial cable to high voltage and then discharging this stored energy into a load. Thus, the cable characteristics determine the output characteristics. Approximately 3 nanoseconds of output pulse width are provided per foot of cable; for critical applications, however, the cable length should be adjusted by output pulse width measurement or TDR techniques. For optimum pulse shape a double-shielded, silver-plated coaxial cable is recommended, such as RG-214/U. For 50 Ohm loads, one end of the transmission line must be terminated with a Reynolds series 521 of connector, while the other end is left open-circuited. For 25 Ohm loads, both ends of the transmission line must be terminated with Reynolds series 521 connectors. Features Fast risetime Greater than 2.4 MW peak power Extremely stable pulse width due to use of fixed transmission lines Flashing high voltage warning light Polarity switchable Single shot or continuous pulsing Front panel or remote trigger The controls and indicators of the SN/SPG-400 are designed to provide maximum flexibility of use and ease of operation. A high voltage interlock plus a flashing high voltage warning indicator are used to provide maximum operator safety. In addition, all high voltage cables that protrude through the rear panel are not charged until just prior to firing the pulser. Applications MIL-STD-461 CS115 impulse testing EMP simulation Lightning simulation EMI simulation Single-shot destructive testing Current injection testing High-voltage instrument calibration Gating power tube grids Exploding bridge wire and slapper detonators Electro-optical Q-switching Pockels cells Acoustic transducers Extraction grids Deflection plates Ultra-wide band (UWB) radar Impulse driven antennas Dry run testing Calculate Freight Specifications Input Power 115 Vac, 60 Hz, less than 15 A Output Impedance 50 and 25 Ω Maximum Output Voltage 11 kV Output Polarity Dual Peak Power 3.1 megawatts Output Connector Teledyne Reynolds series 521 Retail Price $110,420.05 Inspection by a Hofstra Group technician allows us to guarantee this hardware to perform to your satisfaction. This item carries a 7-day unconditional right of return and a 90-day warranty. In the unlikely event that you need to return it, we will arrange and pay for return shipping in addition to refunding the purchase price and original shipping. Please review our Sales Agreement for more information. _gsrx_vers_625 (GS 6.9.7 (625))