+ Post new Ad
113 Techniks CAT 40 Tooling Kit for Haas,Fadal CNC Mill-ER Chuck,Collet,Holder, US $470 – Picture 0
113 Techniks CAT 40 Tooling Kit for Haas,Fadal CNC Mill-ER Chuck,Collet,Holder, US $470 – Picture 0

113 Techniks Cat 40 Tooling Kit For Haas,fadal Cnc Mill-er Chuck,collet,holder

US $470

  • Hamden, Connecticut, United States
  • May 25th
Open on mobile:
QR code
Features: High precision bore (H5) is best in industry, balanced to 10,000 RPM, taper ground to AT3 for maximum spindle contact Features: High precision bore (H5) is best in industry, balanced to 10,000 RPM, taper ground to AT3 for maximum spindle contact Description: CAT 40 x SLN 3/8" x 3" Features: High precision bore (H5) is best in industry, balanced to 10,000 RPM, taper ground to AT3 for maximum spindle contact Part# 22915 Features: 0.0002" maximum run-out, each collet hand inspected Part# 22253 Features: High precision bore (H5) is best in industry, balanced to 10,000 RPM, taper ground to AT3 for maximum spindle contact Description: CAT 40 x ER16-2.76 Description: CAT 40 x SPU 1/2 x 4" Part# 22919 Features: Balanced to 25,000 RPM @ G2.5, T.I.R 0.0001" measured from taper to collet pocket, Techniks Lab Certified each holder comes with a certificated verifying accuracy and balance Part# 22917 Description: CAT 40 x SLN 1/4" x 3" Features: Balanced to 25,000 RPM @ G2.5, T.I.R 0.0001" measured from taper to collet pocket, Techniks Lab Certified each holder comes with a certificated verifying accuracy and balance Description: ER 32 x 18 pc. collet set - inch Part# 22911 Features: High precision bore (H5) is best in industry, balanced to 10,000 RPM, taper ground to AT3 for maximum spindle contact Part# 04212IS Description: ER 16 x 10 pc. collet set - inch Part# 22225 Part# 22403 Description: CAT 40 x SLN 5/8" x 3" Description: CAT 40 x SLN 1/2" x 3" Features: 0.0002" maximum run-out, each collet hand inspected Part# 04209IS Description: CAT 40 x ER32-2.76

Directions

Similar products from Collet Chucks & Sets

7-862-0501 5C COLLET CHUCK BISON 5''

7-862-0501 5C COLLET CHUCK BISON 5''

  • Duncan, South Carolina, United States
  • May 25th
ETM 4501924 ER16 Mini Collet Chuck - 3/4' Shank

ETM 4501924 ER16 Mini Collet Chuck - 3/4' Shank

  • Duncan, South Carolina, United States
  • May 25th
ETM ER-40 Spring Collet Chuck Set - Taper: R8 COLLET SIZE: ER-40

ETM ER-40 Spring Collet Chuck Set - Taper: R8 COLLET SIZE: ER-40

  • Duncan, South Carolina, United States
  • May 25th
Lyndex-Nikken C40S7-0016-2.25 ER16 Collet Chuck - Projection : 2.25'

Lyndex-Nikken C40S7-0016-2.25 ER16 Collet Chuck - Projection : 2.25'

  • Duncan, South Carolina, United States
  • May 25th
Lyndex-Nikken C4007-0025-2.50 ER25 Collet Chuck - Projection : 2.50'

Lyndex-Nikken C4007-0025-2.50 ER25 Collet Chuck - Projection : 2.50'

  • Duncan, South Carolina, United States
  • May 25th
Lyndex-Nikken C4007-0016-3.50 ER16 Collet Chuck - Projection : 3.50'

Lyndex-Nikken C4007-0016-3.50 ER16 Collet Chuck - Projection : 3.50'

  • Duncan, South Carolina, United States
  • May 25th
Sandvik 40MM-VF-12541 Collet Tap Tapping Chuck CAT-40 V-Flange Taper Shank

Sandvik 40MM-VF-12541 Collet Tap Tapping Chuck CAT-40 V-Flange Taper Shank

  • Lorain, Ohio, United States
  • May 25th
5C Collet Pneumatic Air Clamping Chuck Fixture Horizontal or Vertical w/ Actuato

5C Collet Pneumatic Air Clamping Chuck Fixture Horizontal or Vertical w/ Actuato

  • Lorain, Ohio, United States
  • May 25th
11 Piece T.G. Collet & Collet Chuck Set

11 Piece T.G. Collet & Collet Chuck Set

  • Duncan, South Carolina, United States
  • May 25th
COLLIS 77812 CAT50 #1 Q/C TENSION &COMPRESSION HOLDER

COLLIS 77812 CAT50 #1 Q/C TENSION &COMPRESSION HOLDER

  • Duncan, South Carolina, United States
  • May 25th
EWS ER Collet Chuck w/ Interior/Exterior Coolant. Model 31.3025. Excellent!

EWS ER Collet Chuck w/ Interior/Exterior Coolant. Model 31.3025. Excellent!

  • Steamboat Springs, Colorado, United States
  • May 25th
Mitee-Bite 5C Collet Chuck Wrench for CNC Lathes

Mitee-Bite 5C Collet Chuck Wrench for CNC Lathes

  • Hamden, Connecticut, United States
  • May 25th
Valenite NMTB 50 TG 100 Collet Chuck Milling Machine Machinist Tool V50M 10SG

Valenite NMTB 50 TG 100 Collet Chuck Milling Machine Machinist Tool V50M 10SG

  • Yorktown, Virginia, United States
  • May 25th
15 Pcs Grand No21 Collet Set 1/8" to 1" + Chuck # 521 W/Wrench Made in Germany.

15 Pcs Grand No21 Collet Set 1/8" to 1" + Chuck # 521 W/Wrench Made in Germany.

  • Edison, New Jersey, United States
  • May 25th
DA-400 Double Angle Collet Chuck NMTB-50 Taper Shank

DA-400 Double Angle Collet Chuck NMTB-50 Taper Shank

  • Lorain, Ohio, United States
  • May 25th
Collet Chuck for Brown & Sharpe #11 1-1/2" Straight Shank +3/8" Serrated Collet

Collet Chuck for Brown & Sharpe #11 1-1/2" Straight Shank +3/8" Serrated Collet

  • Lorain, Ohio, United States
  • May 25th
ROYAL TOOL HOLDER. ER 32 CAT 40 PN 54126

ROYAL TOOL HOLDER. ER 32 CAT 40 PN 54126

  • North Dartmouth, Massachusetts, United States
  • May 25th
ALBECHT CLASSIC STAINLESS KEYLESS DRILL CHUCK

ALBECHT CLASSIC STAINLESS KEYLESS DRILL CHUCK

  • North Dartmouth, Massachusetts, United States
  • May 25th
ALBECHT (ROYAL ) Classic keyless chuck

ALBECHT (ROYAL ) Classic keyless chuck

  • North Dartmouth, Massachusetts, United States
  • May 25th
ROYAL COMPACT CNC BAR PULL 43308

ROYAL COMPACT CNC BAR PULL 43308

  • North Dartmouth, Massachusetts, United States
  • May 25th

People who viewed this item also vieved

South Bend 9/10k Lathe Collet Rack Original

South Bend 9/10k Lathe Collet Rack Original

  • Creston, Ohio, United States
  • Feb 18th
5C COLLET SET 34 PCS. INTERNAL THREADS WITH RACK VERY GOOD CONDITION

5C COLLET SET 34 PCS. INTERNAL THREADS WITH RACK VERY GOOD CONDITION

  • Greenwood, Indiana, United States
  • Feb 18th
ORIGINAL HARDINGE 7-42 13/32 COLLET LATHE MILLING MACHINIST TOOL

ORIGINAL HARDINGE 7-42 13/32 COLLET LATHE MILLING MACHINIST TOOL

  • United States
  • Feb 18th
Large Angle Plate

Large Angle Plate

  • Bronson, Florida, United States
  • Feb 23rd
Sine Bar, 6'' Machinist, Layout, Milling, grinding

Sine Bar, 6'' Machinist, Layout, Milling, grinding

  • Waterbury, Connecticut, United States
  • Feb 23rd
USED VINTAGE IRON ANGLE PLATE

USED VINTAGE IRON ANGLE PLATE

  • Fullerton, California, United States
  • Feb 23rd
Genuine Crosby 1-1/8" diameter Cable Wire Rope U Clamp Clamping 3/4 bolt threads

Genuine Crosby 1-1/8" diameter Cable Wire Rope U Clamp Clamping 3/4 bolt threads

  • Grand Rapids, Michigan, United States
  • Feb 27th
ENCO 30405 Model #240-0688 Plain Clamp Strap NEW

ENCO 30405 Model #240-0688 Plain Clamp Strap NEW

  • Clearfield, Utah, United States
  • Feb 27th
NEW DE-STA-CO Pull-Action Clamp 331-SS

NEW DE-STA-CO Pull-Action Clamp 331-SS

  • Tempe, Arizona, United States
  • Feb 27th
Used The Ready Tool Steel Live Center with Morse Taper #2, 7-3/4" Length

Used The Ready Tool Steel Live Center with Morse Taper #2, 7-3/4" Length

  • Bristol, Connecticut, United States
  • Feb 28th
The Ready Tool 6-1/2" Length Steel Live Center with MT #2 and Custom Head, G-20

The Ready Tool 6-1/2" Length Steel Live Center with MT #2 and Custom Head, G-20

  • Bristol, Connecticut, United States
  • Feb 28th
Used Lathe Floating Center Tool for DA100 Collet with Morse Taper #2, 6" Length

Used Lathe Floating Center Tool for DA100 Collet with Morse Taper #2, 6" Length

  • Bristol, Connecticut, United States
  • Feb 28th
KURT TYPE VISE HANDLE 3/4"

KURT TYPE VISE HANDLE 3/4"

  • Hillsborough, New Jersey, United States
  • Feb 28th
Kurt D688 Workholding Vise AngLock

Kurt D688 Workholding Vise AngLock

  • Philadelphia, Pennsylvania, United States
  • Feb 28th
Vintage Erie Tool Works Pipe Vise 1/8" - 2"

Vintage Erie Tool Works Pipe Vise 1/8" - 2"

  • Greenville, Pennsylvania, United States
  • Feb 28th
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8

CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8

  • United States
  • Mar 1st
4 1/2" THREE JAW BUCK CHUCK MACHINIST TOOL LATHE MILL

4 1/2" THREE JAW BUCK CHUCK MACHINIST TOOL LATHE MILL

  • Lake Hiawatha, New Jersey, United States
  • Mar 1st
CUSHMAN 9" THREE JAW CHUCK 8TPI MACHINIST TOOL LATHE MILL

CUSHMAN 9" THREE JAW CHUCK 8TPI MACHINIST TOOL LATHE MILL

  • Lake Hiawatha, New Jersey, United States
  • Mar 1st
ROTHFUSS TOOL CO. G2 ANGLE DRESSER AND TOOL HOLDER

ROTHFUSS TOOL CO. G2 ANGLE DRESSER AND TOOL HOLDER

  • Livonia, Michigan, United States
  • May 11th
SET OF TWO * 9" Drill Press Locking Clamp Vise Grip Pliers Heavy Duty 9 Inch x 2

SET OF TWO * 9" Drill Press Locking Clamp Vise Grip Pliers Heavy Duty 9 Inch x 2

  • Daytona Beach, Florida, United States
  • May 12th
HOFMANN GERMANY DIVIDING HEAD EXC CLEAN CONDITION HIGH END MACHINIST TOOL NICE!

HOFMANN GERMANY DIVIDING HEAD EXC CLEAN CONDITION HIGH END MACHINIST TOOL NICE!

  • San Pedro, California, United States
  • May 12th
Suburban Angle Vee Step Block with accessories!

Suburban Angle Vee Step Block with accessories!

  • Durham, North Carolina, United States
  • May 26th
Tool Block

Tool Block

  • Plano, Illinois, United States
  • May 26th
Kendrick and Davis Machinist Bench Block Tool #1087-B

Kendrick and Davis Machinist Bench Block Tool #1087-B

  • Millsboro, Delaware, United States
  • May 26th
NNB-CAMCO TORQ-GARD Flange Mount Overload Clutch (Model 40d) Torque 400 in/lb

NNB-CAMCO TORQ-GARD Flange Mount Overload Clutch (Model 40d) Torque 400 in/lb

  • Albion, New York, United States
  • May 26th
CAMCO 12 Step/Position Rotary Index Table (Model 601RDM12H24-270) 00172939

CAMCO 12 Step/Position Rotary Index Table (Model 601RDM12H24-270) 00172939

  • Albion, New York, United States
  • May 26th
CAMCO 12 Step/Position Rotary Index Table (Model 601RDM12H24-270) 00148534

CAMCO 12 Step/Position Rotary Index Table (Model 601RDM12H24-270) 00148534

  • Albion, New York, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies