+ Post new Ad
12/24 HSS (2 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA, US $5.99 – Picture 0
12/24 HSS (2 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA, US $5.99 – Picture 1
12/24 HSS (2 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA, US $5.99 – Picture 0
12/24 HSS (2 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA, US $5.99 – Picture 1

12/24 Hss (2 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made In Usa

US $5.99

  • Brunswick, Georgia, United States
  • Jan 30th
Open on mobile:
QR code
This is for a 12/24 HSS (2 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA  The Gun Tap shoots chips ahead of the cutting action, thus reducing loading and clogging in the flutes. They are recommended for use in through or blind holes which allow for chip accumulation in the bottom of the hole. Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics. Chamfer: Plug (3-5 pitches)
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Greenfield Industries
MPN EDP# 13262
Model 5301
Country/Region of Manufacture United States

Directions

Similar products from Winding Pointed Taps

YG1 1/4-20 B1403 SPIRAL FLUTE BOTTOM TAP BLUE RING

YG1 1/4-20 B1403 SPIRAL FLUTE BOTTOM TAP BLUE RING

  • Meridian, Idaho, United States
  • Jan 30th
Lot of 4 EMUGE taps Two 3/4-10 UNC-2B one 5/8-18 UNF-2B and one 3/8-16 UNC-2B

Lot of 4 EMUGE taps Two 3/4-10 UNC-2B one 5/8-18 UNF-2B and one 3/8-16 UNC-2B

  • Humble, Texas, United States
  • Jan 30th
Two EMUGE taps one 1 1/8-8 UN-2B and one 1-8 UNC-2B

Two EMUGE taps one 1 1/8-8 UN-2B and one 1-8 UNC-2B

  • Humble, Texas, United States
  • Jan 30th
3 Pcs 20mm x 2.5mm Taper and Plug Metric Tap M20 x 2.5mm Pitch

3 Pcs 20mm x 2.5mm Taper and Plug Metric Tap M20 x 2.5mm Pitch

  • Hong Kong, Hong Kong
  • Jan 30th
WIDIA GTD GT305007 Spiral Flute Tap,#10-24UNC,TiN+CrC/C G7055833

WIDIA GTD GT305007 Spiral Flute Tap,#10-24UNC,TiN+CrC/C G7055833

  • Louisiana, Missouri, United States
  • Jan 30th
SANDVIK COROMANT E324M3 Spiral Flute Tap,M3x0.5,TiAlN G6997697

SANDVIK COROMANT E324M3 Spiral Flute Tap,M3x0.5,TiAlN G6997697

  • Louisiana, Missouri, United States
  • Jan 30th
SANDVIK COROMANT EP29PA1 Spiral Flute Tap,1-8UNC,TiAlN G7121177

SANDVIK COROMANT EP29PA1 Spiral Flute Tap,1-8UNC,TiAlN G7121177

  • Louisiana, Missouri, United States
  • Jan 30th
SANDVIK COROMANT EX33PA5/8 Spiral Flute Tap,5/8-18UNF,TiAlN G6804445

SANDVIK COROMANT EX33PA5/8 Spiral Flute Tap,5/8-18UNF,TiAlN G6804445

  • Louisiana, Missouri, United States
  • Jan 30th
Three Taps - One 3/4 14 NPT and Two 9/16 - 12 SP/PT

Three Taps - One 3/4 14 NPT and Two 9/16 - 12 SP/PT

  • Sebastopol, California, United States
  • Jan 30th
5 greenfield 10-32 TiN coated cut taps H3, with 7 #21 TiN coated drills

5 greenfield 10-32 TiN coated cut taps H3, with 7 #21 TiN coated drills

  • Kalispell, Montana, United States
  • Jan 30th
5/8-11 HSS (3 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA

5/8-11 HSS (3 Flute) H3 Spiral Point Gun Tap, Plug, Greenfield Made in USA

  • Brunswick, Georgia, United States
  • Jan 30th
4/36 HSS (2 Flute) H2 Spiral Point Gun Tap, Plug, Greenfield Made in USA

4/36 HSS (2 Flute) H2 Spiral Point Gun Tap, Plug, Greenfield Made in USA

  • Brunswick, Georgia, United States
  • Jan 30th
GREENFIELD TAPS NEW 5PC 5/16-24 AS SHOWN

GREENFIELD TAPS NEW 5PC 5/16-24 AS SHOWN

  • South Ryegate, Vermont, United States
  • Jan 30th
10pc 5/16-18 TAPS AS SHOWN NEW

10pc 5/16-18 TAPS AS SHOWN NEW

  • South Ryegate, Vermont, United States
  • Jan 30th
6pc 3/8-24 TAPS AS SHOWN NEW

6pc 3/8-24 TAPS AS SHOWN NEW

  • South Ryegate, Vermont, United States
  • Jan 30th
4pc 10-32 TAPS NEW AS SHOWN

4pc 10-32 TAPS NEW AS SHOWN

  • South Ryegate, Vermont, United States
  • Jan 30th
OSG #1726301 Spiral Flute Tap Series/List 303 NEW

OSG #1726301 Spiral Flute Tap Series/List 303 NEW

  • Knoxville, Tennessee, United States
  • Jan 30th
Widia 5/8 - 11 NC/UNC TiCN HSS-E 3 Flute H3 Semi-Bottoming VariTap

Widia 5/8 - 11 NC/UNC TiCN HSS-E 3 Flute H3 Semi-Bottoming VariTap

  • Terre Haute, Indiana, United States
  • Jan 30th
Brubaker 7/16-14 Spiral Point Plug Tap GH3 3FL HSS NC (Made in USA)

Brubaker 7/16-14 Spiral Point Plug Tap GH3 3FL HSS NC (Made in USA)

  • Round Lake, Illinois, United States
  • Jan 30th
3 Pcs 18mm x 2.5mm Taper and Plug Metric Tap M18 x 2.5mm Pitch

3 Pcs 18mm x 2.5mm Taper and Plug Metric Tap M18 x 2.5mm Pitch

  • Hong Kong, Hong Kong
  • Jan 30th

People who viewed this item also vieved

EXC. COND. NEW (1.0625-12) 1-1/16"-12 H8 ROLL FORMING TAP- JARVIS (HSS) - (419)

EXC. COND. NEW (1.0625-12) 1-1/16"-12 H8 ROLL FORMING TAP- JARVIS (HSS) - (419)

  • Marlton, New Jersey, United States
  • Feb 22nd
EXC. COND. NEW (1.125-16) 1-1/8"-16 GH3 RIGHT HAND BOTT TAP- BATH CO - (416)

EXC. COND. NEW (1.125-16) 1-1/8"-16 GH3 RIGHT HAND BOTT TAP- BATH CO - (416)

  • Marlton, New Jersey, United States
  • Feb 22nd
CLEVELAND TWIST 1"11 1/2 PIPE TAP GH 5 FLUTE NOS CONDITION IN BOX MADE IN USA

CLEVELAND TWIST 1"11 1/2 PIPE TAP GH 5 FLUTE NOS CONDITION IN BOX MADE IN USA

  • Huron, Ohio, United States
  • Feb 24th
MACHINIST TOOLS LATHE MILL Starrett Tap Tapping Threading Thread Wrench

MACHINIST TOOLS LATHE MILL Starrett Tap Tapping Threading Thread Wrench

  • Morris Plains, New Jersey, United States
  • Feb 24th
40 taps 3\8-24 varity of brands union trw brubaker etc

40 taps 3\8-24 varity of brands union trw brubaker etc

  • Rio Rancho, New Mexico, United States
  • Feb 24th
LEFT HAND TAP .. 4 FLUTE .. NETCO 192 .. CHROMCLAD .. 1-8NC - G-H6 .. HS

LEFT HAND TAP .. 4 FLUTE .. NETCO 192 .. CHROMCLAD .. 1-8NC - G-H6 .. HS

  • Wilmington, Delaware, United States
  • Feb 24th
JOHN BATH CO. HS 1"-14NF TAP

JOHN BATH CO. HS 1"-14NF TAP

  • Choctaw, Oklahoma, United States
  • Feb 24th
NICE ASSORTED LOT OF 47 TAP(S) VARIOUS SIZES MACHINIST LATHE TOOLS

NICE ASSORTED LOT OF 47 TAP(S) VARIOUS SIZES MACHINIST LATHE TOOLS

  • Lake Hiawatha, New Jersey, United States
  • Feb 24th
geometric 5/16 DSA & 6 die sets

geometric 5/16 DSA & 6 die sets

  • North Hills, California, United States
  • Feb 24th
PHASE II #10 Knurling, Turning & Facing Holder - Model .: 250-410 SERIES: #4

PHASE II #10 Knurling, Turning & Facing Holder - Model .: 250-410 SERIES: #4

  • Flushing, New York, United States
  • Feb 24th
Greenfield 84 piece NC & NS industrial tap and die set

Greenfield 84 piece NC & NS industrial tap and die set

  • Cherry Hill, New Jersey, United States
  • Mar 3rd
34 Piece Tap and Die Set

34 Piece Tap and Die Set

  • Edmonton, Alberta, Canada
  • Mar 3rd
Lot of Mixed Tap & Dies Metalworking Machinist Tools

Lot of Mixed Tap & Dies Metalworking Machinist Tools

  • Greenfield, Tennessee, United States
  • Mar 3rd
Greenfield Metal Tap and Die 01301 5/16-24?

Greenfield Metal Tap and Die 01301 5/16-24?

  • Post Falls, Idaho, United States
  • Mar 3rd
Craftsman Kromedge 59 Pc Mechanics Tap & Die Ser No 9-52151

Craftsman Kromedge 59 Pc Mechanics Tap & Die Ser No 9-52151

  • Fort Myers, Florida, United States
  • Mar 3rd
Morse 2 1/2-8 American NTP Right Hand 8 flutes Used Excellent condition No chips

Morse 2 1/2-8 American NTP Right Hand 8 flutes Used Excellent condition No chips

  • Elkin, North Carolina, United States
  • Mar 11th
LOT OF 14 HSS PIPE TAPS 1/8" -27 NPTF TO 1" -11-1/2 NPT REGAL BESLY JARVIS MEDCO

LOT OF 14 HSS PIPE TAPS 1/8" -27 NPTF TO 1" -11-1/2 NPT REGAL BESLY JARVIS MEDCO

  • Ellington, New York, United States
  • Mar 11th
1 1/2 NPT HS Tap

1 1/2 NPT HS Tap

  • East Greenville, Pennsylvania, United States
  • Mar 12th
2 Inch NPT pipe tap F&D

2 Inch NPT pipe tap F&D

  • East Greenville, Pennsylvania, United States
  • Mar 12th
NEW MORSE USA HSS 3/4" - 14 NPT INTERRUPTED THREAD PIPE TAP

NEW MORSE USA HSS 3/4" - 14 NPT INTERRUPTED THREAD PIPE TAP

  • San Marcos, California, United States
  • Mar 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies