US $325.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “some surface rust and lite nicks no chuck key” |
Directions
Similar products from Lathe Chucks
10-13/16" 3 Jaw Chuck Mounted on a 13" Dia. X 1" Thick Plate NO KEY
Jacobs Chuck 7 1A Taper 0-1/4" Lathe Chuck Nice
Clamprite spindle drawbar force meter
Rotary Table 4" with 65mm Mini Lathe Chuck and Backplate
6" - 3 Jaw Lathe Chuck by Kalamazoo
5 In. 3 Jaw Lathe chuck by Logan
HEAVY DUTY 12" 3 JAW SCROLLING CHUCK W T-SLOTS WRENCH
CUSHMAN 12" 3 JAW SCROLLING CHUCK W/ WRENCH
ERICKSON FORKARDT GERMANY 12" 3 JAW SCROLLING CHUCK
SHARS 12" 3 JAW SCROLLING CHUCK FLAT BACK 3.5" HOLE
Back Plate 8" Toolmex 7-873-085
Howa Hydraulic Chuck with WS Collet System and new set soft jaws
PAIR 1/4 inch TOOL STEEL lathe chuck keys for Atlas, South Bend others
Baileig Combination Belt Grinder & Disc Grinder DBG-106
USED SET OF 3 HURON STEEL SOFT LATHE CHUCK JAWS KT6 (1.50mm x 60° SERRATIONS)
8" Chuck Aluminum Kitagawa Style Soft Jaws 2" Tall
4 JAW 150mm MYFORD 34M LIGHT DUTY INDEPENDENT CHUCK, BRAND NEW IN BOX
SET OF 3 USED HURON STEEL SOFT JAWS (6JSHP) 1.5mm X 60 SERRATIONS
ALBRECHT MILLING CHUCK APC20 WITH 1/2" COLLET
People who viewed this item also vieved
Hardinge 3J 1-1/4 Diameter Collet
Hardinge 3J 1-1/8 Diameter Collet
Lot of 10 Used TG 100 Collets 1''-13/16''-3/4''-5/8''-17/32''-1/2''-3/8''-1/4''
Hardinge CHNC 8 Station Turret Plate with Tool Holders, 7 AHC-21, CC-13
MACHINIST LATHE MILL Micro Ground Hardened Angle Plate Fixture Unimat Sherline a
MACHINIST LATHE MILL Machinist Atlas ? 6" Face Plate 1 1/2" # 9 - 15
Vulcan Holdown No 66 Clamp - 6"
Magsquare 1000 Heavy Duty Welding Magnet
DE-STA-CO 821553 Pneumatic Swing Clamp Mounting Block
Columbian 604M Machinist Vice 4" Jaw W/Swivel Base Opens to 6" USA
Wilton Mechanics Vise 4" Jaw W/Swivel Base Opens to 3"
Wilton WS8 Shop Vise 8" Jaw W/Swivel Base Opens To 8"
NEW MT1 SCREW CENTER DEAD CENTER & MT2 ARBOR - TURN WOOD 6 ATLAS CRAFTSMAN LATHE
Starrett 190A "Little Giant" Jack Screws, Set of 2, NEW
MACHINIST SCREW JACK, 3-4", Little Giant Style, FREE SHIPPING NO RESERVE!
Phase II 225-102 Precision Grinding Wheel Radius Dresser %JB2% RL
7-1/2" HORIZONTAL-VERTICAL ROTARY TABLE SWISS OR GERMAN ***SUPERB***
Anorad 2897 Rotating Stage 6"D Table, EG&G MT-2120-016BE DC Servo Motor
Lot of 16 NAAMS Standard NC Blocks ANL067 NMSS ANL-067
Lot of 40 NAAMS Standards ALB403M NMSS ALB-403M L BLOCK
Machinist Workholding "V" Block w/Clamp
Rotary Table; 6"; w/Dividing Plate(CTAM 9581)
Collis 79041 1-1/16 Automotive Straight Shank ST-2 Sta-Tite Compression Tap Chuc
"Bamboo Fixed Circular Needles 16""-Size 0/2mm"
Reweaving Latch Needle Set W/Handle & Guide-.8mm
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies