+ Post new Ad
12 Inch Range, 0.001 Inch Resolution, Electronic Height Gage, US $270 – Picture 0
12 Inch Range, 0.001 Inch Resolution, Electronic Height Gage, US $270 – Picture 1
12 Inch Range, 0.001 Inch Resolution, Electronic Height Gage, US $270 – Picture 0
12 Inch Range, 0.001 Inch Resolution, Electronic Height Gage, US $270 – Picture 1

12 Inch Range, 0.001 Inch Resolution, Electronic Height Gage

US $270

  • Saint Peters, Missouri, United States
  • Oct 27th
Open on mobile:
QR code
12 Inch Range, 0.001 Inch Resolution, Electronic Height Gage 0.003 Inch Accuracy, LCD Display Type, 357/303 Battery Part #: 50967413 Specs Maximum Measurement (Decimal Inch) 12.0000 Maximum Measurement (mm) 300.00 Resolution (microns) 0.0100 Resolution (Decimal Inch) 0.001000 Data Output (Yes/No) No Display Type LCD Accuracy (mm) 0.040000 Accuracy (Decimal Inch) 0.001500 Minimum Measurement (mm) 0.00 Traceability Certification Included NIST Battery Type 357/303 We sell high-quality industrial surplus at discounted prices. While we take every effort to inspect and test each item we sell, we do not have the capability to fully evaluate many of the items we sell. All items are sold as is with no warranty (unless otherwise specified). If there is an issue with any item purchased, we ask that you contact us first so that we can work to make you a satisfied customer. If you don't see the answer you are looking for in our description or photos, PLEASE ask before purchasing.

Directions

Similar products from Multidetectors & Inspection Gauges

Maury Microwave X320D Standard Mismatch

Maury Microwave X320D Standard Mismatch

  • North Charleston, South Carolina, United States
  • Oct 28th
Vintage LS Starrett # 284 29 Degree Screw Thread Tool Gauge Machinist

Vintage LS Starrett # 284 29 Degree Screw Thread Tool Gauge Machinist

  • Fort Smith, Arkansas, United States
  • Oct 28th
Meyer Metric Z Gage Pins

Meyer Metric Z Gage Pins

  • Reseda, California, United States
  • Oct 28th
Olympus Panametrics 38DL Plus Ultrasonic Thickness Gage Gauge

Olympus Panametrics 38DL Plus Ultrasonic Thickness Gage Gauge

  • Toledo, Ohio, United States
  • Oct 28th
Lot of Twenty-Six Diatest Bore Gage Probes (Inv.36380)

Lot of Twenty-Six Diatest Bore Gage Probes (Inv.36380)

  • Portland, Connecticut, United States
  • Oct 27th
24" Dial Height Gage

24" Dial Height Gage

  • Ventura, California, United States
  • Oct 27th
FEDERAL AIR GAGE UNIT

FEDERAL AIR GAGE UNIT

  • Torrance, California, United States
  • Oct 27th
Gates 91132 Belt Tension Tester

Gates 91132 Belt Tension Tester

  • USA, United States
  • Oct 27th
MITUTOYO LINEAR HEIGHT LITE 600 LH-L600/24 518-203 DIGITAL GAUGE MEASURING PARTS

MITUTOYO LINEAR HEIGHT LITE 600 LH-L600/24 518-203 DIGITAL GAUGE MEASURING PARTS

  • Santa Ana, California, United States
  • Oct 27th
Brand New TIME TT100 Ultrasonic Thickness Tester Gage 1 Year Warranty *2 Probes*

Brand New TIME TT100 Ultrasonic Thickness Tester Gage 1 Year Warranty *2 Probes*

  • Concord, Ontario, Canada
  • Oct 27th
Brencor Countersink-Chek Dial Gage 130° Angle, 0.560"- 0.780" Cap. w/ Ring

Brencor Countersink-Chek Dial Gage 130° Angle, 0.560"- 0.780" Cap. w/ Ring

  • Compton, California, United States
  • Oct 26th
625-11UNC-3B Go No Go Thread Plug Gage, Left Handed, GO PD .5660, HI PD .5714

625-11UNC-3B Go No Go Thread Plug Gage, Left Handed, GO PD .5660, HI PD .5714

  • Compton, California, United States
  • Oct 26th
Quality Measurement Systems Inspection Gage for Readout Gauges

Quality Measurement Systems Inspection Gage for Readout Gauges

  • Compton, California, United States
  • Oct 26th
Fowler Surface Gage Holder with Fine Adjustment

Fowler Surface Gage Holder with Fine Adjustment

  • Punta Gorda, Florida, United States
  • Oct 26th
Heidenhain 376990-01 MT1287 12 0.2 1.7mm Incremental Length Gage

Heidenhain 376990-01 MT1287 12 0.2 1.7mm Incremental Length Gage

  • Matthews, North Carolina, United States
  • Oct 26th
Starrett SR-112-2937 Calibration Standard for SR100 Surface Roughness Tester

Starrett SR-112-2937 Calibration Standard for SR100 Surface Roughness Tester

  • Matthews, North Carolina, United States
  • Oct 26th
Mitutoyo 575-121 ID-U1025 IDV Abs Encoder Digimatic Indicator

Mitutoyo 575-121 ID-U1025 IDV Abs Encoder Digimatic Indicator

  • Punta Gorda, Florida, United States
  • Oct 26th
Dial Indicator Flex Arm Magnetic Base Parts or Repair

Dial Indicator Flex Arm Magnetic Base Parts or Repair

  • Punta Gorda, Florida, United States
  • Oct 26th
Starrett No. 167S radius gage set

Starrett No. 167S radius gage set

  • New Britain, Connecticut, United States
  • Oct 26th
MITUTOYO No. 192 607 24" 600mm DIGITAL HEIGHT GAUGE with SonyLH31A-1D (used)

MITUTOYO No. 192 607 24" 600mm DIGITAL HEIGHT GAUGE with SonyLH31A-1D (used)

  • Newbury Park, California, United States
  • Oct 26th

People who viewed this item also vieved

BROWN & SHARPE 6" DURA-CAL DIGITAL CALIPER , IP65 , .0001"

BROWN & SHARPE 6" DURA-CAL DIGITAL CALIPER , IP65 , .0001"

  • Berlin, Connecticut, United States
  • Jan 30th
Mitutoyo Calipers 533-104

Mitutoyo Calipers 533-104

  • Post Falls, Idaho, United States
  • Jan 30th
Renishaw TP20 CMM Probe Kit 6 New In Box with Full Factory One Year Warranty

Renishaw TP20 CMM Probe Kit 6 New In Box with Full Factory One Year Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
GFM Topocam , Mikro Cad Compac Basler A6021-2

GFM Topocam , Mikro Cad Compac Basler A6021-2

  • United States
  • Jan 30th
ENCO MILLING STEP BLOCK SET MACHINIST TOOL STRAP TOOLMAKER MILL CLAMPING DOWNS

ENCO MILLING STEP BLOCK SET MACHINIST TOOL STRAP TOOLMAKER MILL CLAMPING DOWNS

  • Orange, California, United States
  • Jan 30th
Precision angle parallel set

Precision angle parallel set

  • East Freetown, Massachusetts, United States
  • Jan 30th
MITUTOYO - 900581 - HEIGHT GAGE CENTER FINDER

MITUTOYO - 900581 - HEIGHT GAGE CENTER FINDER

  • Clarklake, Michigan, United States
  • Jan 30th
SHARS .030" .03" BLACK DIAL TEST INDICATOR 0-15-0 .0005" GRADUATION (USED)

SHARS .030" .03" BLACK DIAL TEST INDICATOR 0-15-0 .0005" GRADUATION (USED)

  • Williamsburg, Ohio, United States
  • Jan 30th
NOGA MG71033 HD HOLDER MAGNETIC BASE W/UNIV SWIVEL CLAMP HOLDING POWER: 176 LB

NOGA MG71033 HD HOLDER MAGNETIC BASE W/UNIV SWIVEL CLAMP HOLDING POWER: 176 LB

  • Flushing, New York, United States
  • Jan 30th
NOGA MG1033 HD HOLDER MAGNETIC BASE HOLDING POWER: 176 IBS DIAL, TEST INDICATOR

NOGA MG1033 HD HOLDER MAGNETIC BASE HOLDING POWER: 176 IBS DIAL, TEST INDICATOR

  • Flushing, New York, United States
  • Jan 30th
ETALON .400" - .500" INSIDE .0001" MICROMETER W/MASTER #531 NO. 78.112378

ETALON .400" - .500" INSIDE .0001" MICROMETER W/MASTER #531 NO. 78.112378

  • Rochester, New York, United States
  • Jan 30th
FOWLER Micrometer Measuring Range 0 ~ 4" Set .0001 NIB

FOWLER Micrometer Measuring Range 0 ~ 4" Set .0001 NIB

  • Deer Creek, Illinois, United States
  • Jan 30th
PROTRACTOR DEPTH GAGE 6" USED MACHINIST INSPECTION TOOL

PROTRACTOR DEPTH GAGE 6" USED MACHINIST INSPECTION TOOL

  • Punta Gorda, Florida, United States
  • Jan 30th
5/8-11 THREAD PLUG GAGE UNC-2A 140295 GO PD .5644 GF GAGE NEW MACHINE INSPECTION

5/8-11 THREAD PLUG GAGE UNC-2A 140295 GO PD .5644 GF GAGE NEW MACHINE INSPECTION

  • Punta Gorda, Florida, United States
  • Jan 30th
320 Degree Universal Bevel Protractor Angular Dial Brand New

320 Degree Universal Bevel Protractor Angular Dial Brand New

  • jiaxing, China
  • Jan 30th
20-Inch Steel Protractor (Replacement of Big Horn 19071) Kaufhof - APM-0075

20-Inch Steel Protractor (Replacement of Big Horn 19071) Kaufhof - APM-0075

  • Escondido, California, United States
  • Jan 30th
VINTAGE BROWN & SHARPE NO. 802 SPRING-TYPE 3 IN INSIDE CALIPER ROUND LEGS

VINTAGE BROWN & SHARPE NO. 802 SPRING-TYPE 3 IN INSIDE CALIPER ROUND LEGS

  • Barre, Massachusetts, United States
  • Jan 30th
VINTAGE BROWN & SHARPE NO. 812 SPRING-TYPE 6 IN INSIDE CALIPER FLAT LEGS

VINTAGE BROWN & SHARPE NO. 812 SPRING-TYPE 6 IN INSIDE CALIPER FLAT LEGS

  • Barre, Massachusetts, United States
  • Jan 30th
VINTAGE LUFKIN COMBINATION SQUARE CENTER HEAD PROTRACTOR MACHINIST TOOL

VINTAGE LUFKIN COMBINATION SQUARE CENTER HEAD PROTRACTOR MACHINIST TOOL

  • Waterford, Michigan, United States
  • Jan 30th
STARRETT No. 20 PRECISION MACHINIST SQUARE 4-1/2 inch *A5

STARRETT No. 20 PRECISION MACHINIST SQUARE 4-1/2 inch *A5

  • Thomaston, Connecticut, United States
  • Jan 30th
The CHALLENGE Machinery Co Vintage Machinist Tooling Vintage Square DSE-36-896

The CHALLENGE Machinery Co Vintage Machinist Tooling Vintage Square DSE-36-896

  • Goshen, Indiana, United States
  • Jan 30th
GRANITE SURFACE PLATE STAND 24X18 STEEL-NEW

GRANITE SURFACE PLATE STAND 24X18 STEEL-NEW

  • Chino, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies