12864 Lcd Gm328 Graphical Transistor Rlc Esr Tester Meter Avr Isp Socket

US $1233

  • ShenZhen ,Guangdong, China
  • Jun 9th
The GM328 Tester can measure the capacity value of a single diode in reverse direction, and it can also analyze bipolar transistors if the Base and only one of Collector or Emitter is connected. A single measurement is only necessary to find out the connections of a bridge rectifier. Measurement of the device is precise, and it only takes about two seconds to test. The software can also be configured to enable the series of Up to two Resistors are measured and shown with symbols and values, with up to four decimal digits in the right dimension, and all symbols are surrounded by the probe numbers of the Tester (1-3). The device can also measure one capacitor with a value from 25pF to 100mF through its detection and measurement feature that shows the symbol and value up to four decimal digits in the right dimension. For capacitors with a capacity value above 0.18µF, the Equivalent Serial Resistance (ESR) is measured with a resolution of 0.01? and shown with two significant decimal digits. The GM328 Tester also measures the current amplification factor and Base-Emitter threshold voltage of bipolar transistors and identifies Darlington transistors through their threshold voltage and high current amplification factor. It can also detect the protection diode of bipolar transistors and MOSFETs while measuring the Gate threshold voltage and Gate capacity value of MOSFETs. The GM328 Tester identifies up to two diodes with symbols or symbols in the correct order. The device can also detect LED as diode, where the  flux voltage is higher than normal. Testing for Zener-Diodes can be performed, and the device identifies them if reverse break down voltage is below 4.5V. The GM328 Tester can detect up to three diode type parts and shows the number of founded diodes in addition to the fail message. The GM328 Graphical Transistor RLC ESR Tester Meter is equipped with ATmega328 microcontrollers that display results through a 128x64 graphic LCD display. Its one-key operation includes automatic power shutdown with a shutdown current of only about 20nA. The device has automatic detection features for NPN and PNP bipolar transistors, N- and P-channel MOSFETs, JFETs, diodes, double diodes, Thyristors, and Triacs. Additionally, it automatically detects the pin layout of the detected part.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded/Generic
MPN Does not apply

Directions

Similar products from Broadcast Monitors & Modulation Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies