+ Post new Ad
13/16X2 JETBROACH NITTO KOHKI CUTTER TK00561 - 13/16"x2", US $65.00 – Picture 0
13/16X2 JETBROACH NITTO KOHKI CUTTER TK00561 - 13/16"x2", US $65.00 – Picture 1
13/16X2 JETBROACH NITTO KOHKI CUTTER TK00561 - 13/16"x2", US $65.00 – Picture 2
13/16X2 JETBROACH NITTO KOHKI CUTTER TK00561 - 13/16"x2", US $65.00 – Picture 0
13/16X2 JETBROACH NITTO KOHKI CUTTER TK00561 - 13/16"x2", US $65.00 – Picture 1
13/16X2 JETBROACH NITTO KOHKI CUTTER TK00561 - 13/16"x2", US $65.00 – Picture 2

13/16x2 Jetbroach Nitto Kohki Cutter Tk00561 - 13/16"x2"

US $65.00

  • San Bernardino, California, United States
  • Jan 30th
Open on mobile:
QR code
Bidding on Qty 1 - 13/16" Diameter  x 2" Depth JETBROACH Cutter Tungsten Carbide Tipped Annular Cutter For simplicity, one-touch cutter replacement needs no tools Rationalized Hole-cutting Genuine one-touch cutters Nitto Kohki has developed the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed to be mounted and removed without the use of a tool. This reduces the time needed to replace cutters. Jetbroach Cutters are far better than twist drills: No dead point Peripheral cutting Dramatically reduce cutting resistance Available size: 9/16” - 4” diameter Jetbroach Cutter Features Carbide tips for faster cutting Single pass cutting, no pilot hole required Annular part does all the work so small cutting resistance reduces drilling time Cutting of slanted, elongated and edge holes is now possible Fractional and metric cutter sizes to suit wide range of applications Produces little slag and few chips for easy disposal Can also be fitted to and used with previous Atra Ace models using a hexagon socket set-screw Improved concentricity extends cutter life! One-touch system consisting of three balls inside the arbor body produces a self-centering effect during cutting to improve cutter performance and life Self-centering effect mechanism to extended cutter life. Feed & Speeds For Annular Cutters A guide to the selection of circumferential cutting speeds:    feet/min m/min   Stainless Steel  65 - 131 20-40  Mild Steel  98 - 164  30-50  Cast Iron  98 - 164  30-50  Brass  164 - 229  50-70  Aluminum  229 - 295  70-90 Test Drilling is very often the only way to determine the machinability of difficult materials. Use a small size cutter wherever possible in order to minimize trial costs. Recommended Feed: 0.001”-0.004”/rev. (0.02~0.1 mm/rev.)
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Nitto Kohki
Country/Region of Manufacture Japan

Directions

Similar products from Other Drilling Tools

4 new UNION BUTTERFIED? #5 combined drill & countersink 120° center drill USA

4 new UNION BUTTERFIED? #5 combined drill & countersink 120° center drill USA

  • San Marcos, California, United States
  • Jan 30th
453H-0115 1-15/32'' GEN2 T-A SPADE DRILL INSERT - COATED SUPER COBALT AM200

453H-0115 1-15/32'' GEN2 T-A SPADE DRILL INSERT - COATED SUPER COBALT AM200

  • Glendale, Arizona, United States
  • Jan 30th
Kemmer Drill, 3.10mm (.1220), 1/8” shank, OAL 1 1/2"

Kemmer Drill, 3.10mm (.1220), 1/8” shank, OAL 1 1/2"

  • Hopkinsville, Kentucky, United States
  • Jan 30th
Mini Drill Set 21 Pc

Mini Drill Set 21 Pc

  • Kaneohe, Hawaii, United States
  • Jan 30th
433T-0120 1-5/8'' SERIES #3 T-A SPADE DRILL INSERT, M4 TiN

433T-0120 1-5/8'' SERIES #3 T-A SPADE DRILL INSERT, M4 TiN

  • Glendale, Arizona, United States
  • Jan 30th
Lot of Milwaukee high speed steel annular cutters and ejector pins

Lot of Milwaukee high speed steel annular cutters and ejector pins

  • Canada, Canada
  • Jan 30th
AMEC SPADE DRILL C-250-150

AMEC SPADE DRILL C-250-150

  • Wadley, Alabama, United States
  • Jan 30th
New 1pcs HSS Chamfer End mill Cutter Dia 12.4mm 90degree 1Flute Countersink Bit

New 1pcs HSS Chamfer End mill Cutter Dia 12.4mm 90degree 1Flute Countersink Bit

  • CN, China
  • Jan 30th
AMEC Z T-A Coolant Spade Drill Ext 3/4" SS 250Z0S-075L

AMEC Z T-A Coolant Spade Drill Ext 3/4" SS 250Z0S-075L

  • Windsor, Connecticut, United States
  • Jan 30th
Morse Cutting Tools 25631 Single Flute Countersink,

Morse Cutting Tools 25631 Single Flute Countersink,

  • Pasadena, Texas, United States
  • Jan 30th
2 NEW MELCUT 1/2" SPOT DRILL, 90 DEGREE, HIGH SPEED STEEL. {296}

2 NEW MELCUT 1/2" SPOT DRILL, 90 DEGREE, HIGH SPEED STEEL. {296}

  • Cleveland, Ohio, United States
  • Jan 30th
ONE NEW MELCUT 1" SPOT DRILL, 90 DEGREE, HIGH SPEED STEEL. {298}

ONE NEW MELCUT 1" SPOT DRILL, 90 DEGREE, HIGH SPEED STEEL. {298}

  • Cleveland, Ohio, United States
  • Jan 30th
5 NEW MELCUT 3/8" SPOT DRILL, 90 DEGREE, HIGH SPEED STEEL. {295}

5 NEW MELCUT 3/8" SPOT DRILL, 90 DEGREE, HIGH SPEED STEEL. {295}

  • Cleveland, Ohio, United States
  • Jan 30th
1-1/8" T.A Spade Drill 182A-0104 Premium Cobalt

1-1/8" T.A Spade Drill 182A-0104 Premium Cobalt

  • Houston, Texas, United States
  • Jan 30th
ACE Drill bushings/sleeves/Machinist Tools

ACE Drill bushings/sleeves/Machinist Tools

  • Buffalo, Missouri, United States
  • Jan 30th
1-5/32" T.A Spade Drill Insert Super Cobalt AM-200

1-5/32" T.A Spade Drill Insert Super Cobalt AM-200

  • Houston, Texas, United States
  • Jan 30th
1pcs Indexable Drill Dia 20mm Shank 25mm With 10pcs WCMX030208R Carbide Inserts

1pcs Indexable Drill Dia 20mm Shank 25mm With 10pcs WCMX030208R Carbide Inserts

  • CN, China
  • Jan 30th
Challenge drill bits

Challenge drill bits

  • Los Angeles, California, United States
  • Jan 30th
1-1/8" T.A. Spade Drill Insert 452H-0104 Super Cobalt AM-200

1-1/8" T.A. Spade Drill Insert 452H-0104 Super Cobalt AM-200

  • Houston, Texas, United States
  • Jan 30th
1 USED 25/32 DRILL BIT WITH 1/2"SHANK HIGH SPEED STEEL, PTD USA,SILVER & DEMING

1 USED 25/32 DRILL BIT WITH 1/2"SHANK HIGH SPEED STEEL, PTD USA,SILVER & DEMING

  • Pawtucket, Rhode Island, United States
  • Jan 30th

People who viewed this item also vieved

CLEVELAND TWIST .4083 M-42 STEP DRILL (AA4022-2)

CLEVELAND TWIST .4083 M-42 STEP DRILL (AA4022-2)

  • Miami, Florida, United States
  • Feb 28th
CLEVELAND TWIST .422X.5039 M-42 STEP DRILL (AA3980-2)

CLEVELAND TWIST .422X.5039 M-42 STEP DRILL (AA3980-2)

  • Miami, Florida, United States
  • Feb 28th
CLEVELAND TWIST .437X.750 TS STEP DRILL (AA3978-1)

CLEVELAND TWIST .437X.750 TS STEP DRILL (AA3978-1)

  • Miami, Florida, United States
  • Feb 28th
1/4" YG-1 Solid Carbide 4Flute TIALN Hi-Perf End Mill (O 184)

1/4" YG-1 Solid Carbide 4Flute TIALN Hi-Perf End Mill (O 184)

  • Dallas, Texas, United States
  • Mar 5th
Kennametal Carbide 8.733mm Coolant Fed Drill B978A0833 KC7315

Kennametal Carbide 8.733mm Coolant Fed Drill B978A0833 KC7315

  • Peosta, Iowa, United States
  • Mar 5th
Kennametal Carbide 10.5mm Coolant Fed Drill B225A10500HP KC7315

Kennametal Carbide 10.5mm Coolant Fed Drill B225A10500HP KC7315

  • Peosta, Iowa, United States
  • Mar 5th
LOT OF 11 HSSS 2MT & 4MT TWIST DRILLS 31/64" TO 1-1/16" MALCUS BENDIX THREADWELL

LOT OF 11 HSSS 2MT & 4MT TWIST DRILLS 31/64" TO 1-1/16" MALCUS BENDIX THREADWELL

  • Ellington, New York, United States
  • Mar 7th
CTD Co. 1" APPROX 11" OAL HIGH SPEED TAPERED SHANK INDUSTRIAL REAMER

CTD Co. 1" APPROX 11" OAL HIGH SPEED TAPERED SHANK INDUSTRIAL REAMER

  • Brighton, Michigan, United States
  • Mar 7th
BUTTERFIELD 1-1/4" APPROX 13" OAL HIGH SPEED TAPERED SHANK INDUSTRIAL REAMER

BUTTERFIELD 1-1/4" APPROX 13" OAL HIGH SPEED TAPERED SHANK INDUSTRIAL REAMER

  • Brighton, Michigan, United States
  • Mar 7th
Mist Coolant System, Mist Lubrication System for Lathe, Milling

Mist Coolant System, Mist Lubrication System for Lathe, Milling

  • Shenzhen, China
  • Mar 24th
KOOL MIST model MCLF 18

KOOL MIST model MCLF 18

  • Emmett, Michigan, United States
  • Mar 24th
.5625 CARBIDE TIPPED COOLANT DRILL

.5625 CARBIDE TIPPED COOLANT DRILL

  • Millbury, Ohio, United States
  • Mar 24th
PAIR OF COMPLETE DRILL INDEXES FRACTIONAL & METRIC HUOT & PRECISION

PAIR OF COMPLETE DRILL INDEXES FRACTIONAL & METRIC HUOT & PRECISION

  • Ellington, New York, United States
  • Mar 27th
MAGNUM NORSEMAN 3PC ULTRA MULTI DIAMETER STEP DRILL BIT SET MADE USA

MAGNUM NORSEMAN 3PC ULTRA MULTI DIAMETER STEP DRILL BIT SET MADE USA

  • Los Angeles, California, United States
  • Mar 27th
MAGNUM NORSEMAN SP-26 26PC PREMIUM JOBBER DRILL BIT SET MADE IN USA

MAGNUM NORSEMAN SP-26 26PC PREMIUM JOBBER DRILL BIT SET MADE IN USA

  • Los Angeles, California, United States
  • Mar 27th
New Cleveland Drill Bit C15139 2175A Sz J Cobalt Steel TiAIN Coated

New Cleveland Drill Bit C15139 2175A Sz J Cobalt Steel TiAIN Coated

  • Madison, Wisconsin, United States
  • Jun 27th
Machinist Vintage Gem Instrument Co. Indicator & Case Cleveland Ohio

Machinist Vintage Gem Instrument Co. Indicator & Case Cleveland Ohio

  • Yorktown, Indiana, United States
  • Jun 28th
Lot Of 7 HSS Drill Blanks 3/8"- 1/2"- 9/16" 5& 6" Lg.

Lot Of 7 HSS Drill Blanks 3/8"- 1/2"- 9/16" 5& 6" Lg.

  • Yorktown, Indiana, United States
  • Jun 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies