+ Post new Ad
15* DEGREE TRIM BEVEL ROUTER BIT, 1/2" SHANK, CARBIDE TIP, LAMINATE CHAMFER, US $4.25 – Picture 0
15* DEGREE TRIM BEVEL ROUTER BIT, 1/2" SHANK, CARBIDE TIP, LAMINATE CHAMFER, US $4.25 – Picture 0

15* Degree Trim Bevel Router Bit, 1/2" Shank, Carbide Tip, Laminate Chamfer

US $4.25

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
Open on mobile:
QR code
Brand new, never used 15 degree trim and laminate bevel router bit with 1/2" bearing, and a 1/2" shank.  Serves for cutting flat faced corner details at 15 (75) degree slope up to 5/8" along the angle.  This is basically a 15 degree chamfer bit with a smaller cutting edge for more convenient use in portable routers and in most trim and laminate edging applications where there is no need for more cutting surface  Bit fits all 1/2" shank portable and table routers.  C2 Micrograin tungsten carbide cutting edge provides a good balance of strength and durability.  Harder C3 and C4 carbides wear somewhat more slowly, but are also more brittle, meaning they are more likely to chip in an encounter with an unseen nail or embedded rock.  Softer C1 carbides wear more quickly, but are likewise the most resistant to shock damage.  All Carbide wear at a rate at least 10x slower than their high speed steel equivalents.   See attached image for dimension specifics -Shank and body carbon steel heat treated for stability -Low kickback design -Precision ground 1/2 shanks   Best offer feature is primarily intended for customers to suggest combined shipping discounts.  My single item buy it now prices are typically as low as I can go for an individual sale, but check out my other auctions, and if you see anything else you like, buy one item and we can work out combined shipping discounts on additional items using the best offer / counter offer feature.  For small items it can make a pretty big difference in per item cost. Please don't hesitate to contact me with any questions before or after sale.     Thanks for viewing!

Directions

Similar products from Router Bits & Sets

3/4 in Arbor Door Lip Ogee & Cove # 87993 Carbide Tipped Shaper Cutter

3/4 in Arbor Door Lip Ogee & Cove # 87993 Carbide Tipped Shaper Cutter

  • Jonesboro, Georgia, United States
  • Jan 30th
3/4 in Arbor Door Lip Ogee & Cove Shaper Cutter 43-993 Carbide Tipped

3/4 in Arbor Door Lip Ogee & Cove Shaper Cutter 43-993 Carbide Tipped

  • Jonesboro, Georgia, United States
  • Jan 30th
3/4 French Provincial Carbide Tipped Shaper Cutter w/ (2) 1/2 inch Bushings

3/4 French Provincial Carbide Tipped Shaper Cutter w/ (2) 1/2 inch Bushings

  • Jonesboro, Georgia, United States
  • Jan 30th
1 1/4 bore 2 in cut 4 in dia Carbide Tipped Shaper Cutter Straight Rabbet Dado

1 1/4 bore 2 in cut 4 in dia Carbide Tipped Shaper Cutter Straight Rabbet Dado

  • Jonesboro, Georgia, United States
  • Jan 30th
BOSCH ROUTER BIT 1/4" UPSPIRAL STRAIGHT BIT, PART NUMBER 85911MC

BOSCH ROUTER BIT 1/4" UPSPIRAL STRAIGHT BIT, PART NUMBER 85911MC

  • Pearland, Texas, United States
  • Jan 30th
WOOD RIVER KEYHOLE ROUTER BIT, PART NUMBER 144115

WOOD RIVER KEYHOLE ROUTER BIT, PART NUMBER 144115

  • Pearland, Texas, United States
  • Jan 30th
5pcs double flute aluminium substrate endmill CNC router bits 0.5mm

5pcs double flute aluminium substrate endmill CNC router bits 0.5mm

  • CN, China
  • Jan 30th
1pcs pure aluminium cutting single flute endmill CNC router bits 6mm 15mm

1pcs pure aluminium cutting single flute endmill CNC router bits 6mm 15mm

  • CN, China
  • Jan 30th
Wards supreme quality Shaper Router Blade & shaft

Wards supreme quality Shaper Router Blade & shaft

  • Sacramento, California, United States
  • Jan 30th
1/2" HINGE MORTISING STRAIGHT ROUTER BIT, 1/2" SHANK, 2 CARBIDE FLUTES, CLEANING

1/2" HINGE MORTISING STRAIGHT ROUTER BIT, 1/2" SHANK, 2 CARBIDE FLUTES, CLEANING

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
10* DEGREE TRIM BEVEL ROUTER BIT, 1/2" SHANK, CARBIDE TIP, LAMINATE CHAMFER

10* DEGREE TRIM BEVEL ROUTER BIT, 1/2" SHANK, CARBIDE TIP, LAMINATE CHAMFER

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/2" FLUSH TRIM STRAIGHT ROUTER BIT, TWO CARBIDE CUTTING FLUTES, HALF INCH SHANK

1/2" FLUSH TRIM STRAIGHT ROUTER BIT, TWO CARBIDE CUTTING FLUTES, HALF INCH SHANK

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/2" FLUSH TRIM STRAIGHT ROUTER BIT, 3 CARBIDE CUTTING FLUTES, HALF INCH SHANK

1/2" FLUSH TRIM STRAIGHT ROUTER BIT, 3 CARBIDE CUTTING FLUTES, HALF INCH SHANK

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
3/8" FLUSH TRIM STRAIGHT ROUTER BIT, 3 CARBIDE BLADE CUTTING FLUTES, 1/2" SHANK

3/8" FLUSH TRIM STRAIGHT ROUTER BIT, 3 CARBIDE BLADE CUTTING FLUTES, 1/2" SHANK

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
3/8" FLUSH TRIM STRAIGHT ROUTER BIT, 2 CARBIDE BLADE CUTTING FLUTES, 1/2" SHANK

3/8" FLUSH TRIM STRAIGHT ROUTER BIT, 2 CARBIDE BLADE CUTTING FLUTES, 1/2" SHANK

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/16" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

1/16" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/8" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

1/8" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/4" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

1/4" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
3/8" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

3/8" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
5/32" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

5/32" ROUND-OVER ROUTER BIT W/ 1/2" SHANK & CARBIDE TIP (TCT) [CORNER ROUNDOVER]

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Foley Belsaw Model 310-16 Saw Blade Grinder Owners Manual Sharpener

Foley Belsaw Model 310-16 Saw Blade Grinder Owners Manual Sharpener

  • Croswell, Michigan, United States
  • Jan 30th
Atlas/Craftsman 12" Metal Lathe Parts List 101.07403 Parts List Users Manual.

Atlas/Craftsman 12" Metal Lathe Parts List 101.07403 Parts List Users Manual.

  • Naperville, Illinois, United States
  • Jan 30th
Operating Instruction Parts CRAFTSMAN BELT SANDER No. 207.2230

Operating Instruction Parts CRAFTSMAN BELT SANDER No. 207.2230

  • Fall River, Massachusetts, United States
  • Jan 30th
HARD MAPLE VENEER 60-PIECES 5" X 8" FREE SHIP!

HARD MAPLE VENEER 60-PIECES 5" X 8" FREE SHIP!

  • Cleveland, Ohio, United States
  • Mar 8th
ENGLISH SYCAMORE VENEER -NICELY FIGURED 60-PIECES 5" X 8" FREE SHIP!

ENGLISH SYCAMORE VENEER -NICELY FIGURED 60-PIECES 5" X 8" FREE SHIP!

  • Cleveland, Ohio, United States
  • Mar 8th
64 PIECES 1/16" THICK WHITE OAK VENEER

64 PIECES 1/16" THICK WHITE OAK VENEER

  • Cleveland, Ohio, United States
  • Mar 8th
Bosch BS5678-6W 56-7/8-Inch X 1/4-Inch X 6-Tpi General Purpose Stationary Band S

Bosch BS5678-6W 56-7/8-Inch X 1/4-Inch X 6-Tpi General Purpose Stationary Band S

  • United States
  • Mar 9th
Delta 34-562 cutter head with 14 sets of various moulding cutterhead knives

Delta 34-562 cutter head with 14 sets of various moulding cutterhead knives

  • Bangor, Maine, United States
  • Mar 9th
IRWIN Tools MARATHON Vinyl Siding Corded Circular Saw Blade, 7 1/4-inch, 120T (1

IRWIN Tools MARATHON Vinyl Siding Corded Circular Saw Blade, 7 1/4-inch, 120T (1

  • United States
  • Mar 9th
Vintage Black & Decker Horizontal Drill Stand Cat. # 72-100

Vintage Black & Decker Horizontal Drill Stand Cat. # 72-100

  • Westminster, Colorado, United States
  • Apr 28th
Woodstock Board Buddies W1104 Anti-Kickback Hold-Down Device Table Saws Routers

Woodstock Board Buddies W1104 Anti-Kickback Hold-Down Device Table Saws Routers

  • Aurora, Colorado, United States
  • Apr 29th
RARE EARLY VINTAGE SARGENT?? NO.93 CLAMP ON CAST IRON VISE MADE IN USA

RARE EARLY VINTAGE SARGENT?? NO.93 CLAMP ON CAST IRON VISE MADE IN USA

  • Rio Vista, California, United States
  • Apr 30th
Delta 2-Speed Heavy Duty Wood Shaper, Platinum Edition

Delta 2-Speed Heavy Duty Wood Shaper, Platinum Edition

  • Vestal, New York, United States
  • Jun 11th
3d model Old Town for CNC Router stl ArtCam

3d model Old Town for CNC Router stl ArtCam

  • United States
  • Jun 11th
THE "ULTIMATE" UNISAW INSERT PLATES - FOUR STYLES IN BILLET ALUMINUM - ALL NEW

THE "ULTIMATE" UNISAW INSERT PLATES - FOUR STYLES IN BILLET ALUMINUM - ALL NEW

  • Freeland, Michigan, United States
  • Jun 12th
Round Turned Wood Carving Mallet Epoxy Filled Spalted Hard Maple

Round Turned Wood Carving Mallet Epoxy Filled Spalted Hard Maple

  • Fort Wayne, Indiana, United States
  • May 27th
Narex 650 gram 16 oz Beech Wood Carving Mallet 825300

Narex 650 gram 16 oz Beech Wood Carving Mallet 825300

  • USA, United States
  • May 27th
Narex 3 mm (1/8") Woodworking Cabinetmaker's Chisel with Beech Handle 810103

Narex 3 mm (1/8") Woodworking Cabinetmaker's Chisel with Beech Handle 810103

  • USA, United States
  • May 27th
Fastenal Magnum Left Hand Drill Bit 1/2" NEW

Fastenal Magnum Left Hand Drill Bit 1/2" NEW

  • Hanover, Pennsylvania, United States
  • May 29th
Vintage Drill 5 piece Allied ISOPERM Bit Set Collectible w/Wood Box 1/4" to 1/2"

Vintage Drill 5 piece Allied ISOPERM Bit Set Collectible w/Wood Box 1/4" to 1/2"

  • Chicago, Illinois, United States
  • May 29th
Kawasaki 7/16" Titanium Coated HSS Twist Drill Bit (QTY 2) A0151

Kawasaki 7/16" Titanium Coated HSS Twist Drill Bit (QTY 2) A0151

  • South Bend, Indiana, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies