+ Post new Ad
15mm x .5 Metric Right hand Die M15 x 0.5mm Pitch, US $18.80 – Picture 0
15mm x .5 Metric Right hand Die M15 x 0.5mm Pitch, US $18.80 – Picture 0

15mm X .5 Metric Right Hand Die M15 X 0.5mm Pitch

US $18.80

  • Shanghai, China
  • Jun 9th
Open on mobile:
QR code
Brand new metric right hand thread die 15mm x 0.5mm. The outside diameter is 38mm. The die handle also available in our store. If there is anything taps or dies you need, do not hesitate to contact us. There are a variety of sizes available but they are not all listed. inkfrog terapeak inkFrog Analytics
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
UPC Does Not Apply
MPN Does Not Apply

Directions

Similar products from Hand Thread Taps

(#5096C) Used USA Made 1-1/8 x 8 NC Plug Style Hand Tap

(#5096C) Used USA Made 1-1/8 x 8 NC Plug Style Hand Tap

  • Warren, Michigan, United States
  • Jun 9th
(#5102C) Used USA Made 1 x 14 Plug Style Hand Tap

(#5102C) Used USA Made 1 x 14 Plug Style Hand Tap

  • Warren, Michigan, United States
  • Jun 9th
(#5095C) Used USA Made 1-1/8 x 8 NC Plug Style Hand Tap

(#5095C) Used USA Made 1-1/8 x 8 NC Plug Style Hand Tap

  • Warren, Michigan, United States
  • Jun 9th
6 NEW HSS BUTTERFIELD TAPS 1/4-20 N.C. 4 FLUTE machinist tools *X

6 NEW HSS BUTTERFIELD TAPS 1/4-20 N.C. 4 FLUTE machinist tools *X

  • Thomaston, Connecticut, United States
  • Jun 9th
Dormer MTT-X E037 5/8"-18 Tap H3 UNF SF HSS-XS1

Dormer MTT-X E037 5/8"-18 Tap H3 UNF SF HSS-XS1

  • Venice, Florida, United States
  • Jun 9th
GREENFIELD TAP AND DIE 19260 5/16 24 NF H3 4 FLUTE PLUG SUTR

GREENFIELD TAP AND DIE 19260 5/16 24 NF H3 4 FLUTE PLUG SUTR

  • Venice, Florida, United States
  • Jun 9th
Interstate M8.0 x 1.25 D5 HSS Ground Thread Plug Metric Hand Taps

Interstate M8.0 x 1.25 D5 HSS Ground Thread Plug Metric Hand Taps

  • Venice, Florida, United States
  • Jun 9th
NICE!! VERMONT TAPER PIPE TAP 1-1/4"-11-1/2"

NICE!! VERMONT TAPER PIPE TAP 1-1/4"-11-1/2"

  • Ellington, New York, United States
  • Jun 9th
NICE!! REGAL BELOIT TAPER PIPE TAP 1-1/2"-11-1/2"

NICE!! REGAL BELOIT TAPER PIPE TAP 1-1/2"-11-1/2"

  • Ellington, New York, United States
  • Jun 9th
Greenfield 1/4-28NF Bottoming Hand Tap Machinist Gunsmith Aircraft Mechanic Tool

Greenfield 1/4-28NF Bottoming Hand Tap Machinist Gunsmith Aircraft Mechanic Tool

  • Supply, North Carolina, United States
  • Jun 9th
7/16-40 NS Special GH1 Hand Tap Machinist Gunsmith Aircraft Mechanic Thread Tool

7/16-40 NS Special GH1 Hand Tap Machinist Gunsmith Aircraft Mechanic Thread Tool

  • Supply, North Carolina, United States
  • Jun 9th
Cromclad 7/16-18 NC Hand Tap Machinist Gunsmith Aircraft Mechanic Threading Tool

Cromclad 7/16-18 NC Hand Tap Machinist Gunsmith Aircraft Mechanic Threading Tool

  • Supply, North Carolina, United States
  • Jun 9th
Union Butterfield 11/16-16 NS GH3 Tap Set 3 pcs (LOC1127)

Union Butterfield 11/16-16 NS GH3 Tap Set 3 pcs (LOC1127)

  • Lake Crystal, Minnesota, United States
  • Jun 9th
Three Besly taps 1/2-13

Three Besly taps 1/2-13

  • Mansfield, Ohio, United States
  • Jun 9th
Besly taps 7/16-14

Besly taps 7/16-14

  • Mansfield, Ohio, United States
  • Jun 9th
THREE LEFT HAND TAPS 1/2" - 13 ONE 1/2" - 20 FOUR FLUTE USA

THREE LEFT HAND TAPS 1/2" - 13 ONE 1/2" - 20 FOUR FLUTE USA

  • Tallmadge, Ohio, United States
  • Jun 9th
NIP Irwin-Hanson 10-32NF SELF-ALIGNING TAP & DRILL BIT #1765536 USA

NIP Irwin-Hanson 10-32NF SELF-ALIGNING TAP & DRILL BIT #1765536 USA

  • Seneca, South Carolina, United States
  • Jun 9th
6 LEFT HAND TAPS THREE 3/8" - 16 TWO 5/16" - 18 ONE 1/4" -20 USA

6 LEFT HAND TAPS THREE 3/8" - 16 TWO 5/16" - 18 ONE 1/4" -20 USA

  • Tallmadge, Ohio, United States
  • Jun 9th
7 PIPE TAPS NPT TWO 3/8" TWO 1/4" THREE 1/8"

7 PIPE TAPS NPT TWO 3/8" TWO 1/4" THREE 1/8"

  • Tallmadge, Ohio, United States
  • Jun 9th
4) tap wrenches. inc. Vintage Greenfield No 6, 14, 338

4) tap wrenches. inc. Vintage Greenfield No 6, 14, 338

  • Kimbolton, Ohio, United States
  • Jun 9th

People who viewed this item also vieved

Craftsman 50PC SAE-METRIC Tap & Die SET New + Mystery Gift

Craftsman 50PC SAE-METRIC Tap & Die SET New + Mystery Gift

  • Glendale, California, United States
  • Jan 30th
1 1/2 11 1/2 L2 PTF SAE SHORT PIPE THREAD RING GAGE MACHINIST TOOLS SHOP TOOLING

1 1/2 11 1/2 L2 PTF SAE SHORT PIPE THREAD RING GAGE MACHINIST TOOLS SHOP TOOLING

  • Xenia, Ohio, United States
  • Jan 30th
1 1/4 11 1/2 PTF SHORT L1 THREAD RING GAGE MACHINIST TOOLING SHOP TOOL TOOLMAKER

1 1/4 11 1/2 PTF SHORT L1 THREAD RING GAGE MACHINIST TOOLING SHOP TOOL TOOLMAKER

  • Xenia, Ohio, United States
  • Jan 30th
p & n hsgh-3, 1/2-20nf #09494 tap

p & n hsgh-3, 1/2-20nf #09494 tap

  • Coarsegold, California, United States
  • Jan 30th
NEW 1/4 20 UNC 2A GO NO GO THREAD RING GAGE .25 P.D.'S = .2164 & .2127 TOOLING

NEW 1/4 20 UNC 2A GO NO GO THREAD RING GAGE .25 P.D.'S = .2164 & .2127 TOOLING

  • Xenia, Ohio, United States
  • Jan 30th
YG 5/16 - 18 GH3 P-HSS Tap

YG 5/16 - 18 GH3 P-HSS Tap

  • Houston, Texas, United States
  • Jan 30th
VEGA HP 5/16 - 18 NC GH3 HSSE-V Tap

VEGA HP 5/16 - 18 NC GH3 HSSE-V Tap

  • Houston, Texas, United States
  • Jan 30th
7/16-14 GH12 OSG HY-PRO TAPS(5)

7/16-14 GH12 OSG HY-PRO TAPS(5)

  • Langley, Washington, United States
  • Jan 30th
VEGA HP 5/16 - 24 NF GH3 HSSE-V Tap

VEGA HP 5/16 - 24 NF GH3 HSSE-V Tap

  • Houston, Texas, United States
  • Jan 30th
CLEVELAND 87393013 C41630 SQUARE END MILL 3/4 / SINGLE END / 2 FLUTE / HSS

CLEVELAND 87393013 C41630 SQUARE END MILL 3/4 / SINGLE END / 2 FLUTE / HSS

  • Roanoke, Virginia, United States
  • Jan 30th
MINI COLLECTION OF MOSTLY NAPA HAND TOOL MACHINIST TAPS

MINI COLLECTION OF MOSTLY NAPA HAND TOOL MACHINIST TAPS

  • Oklahoma City, Oklahoma, United States
  • Jan 30th
3 QUALITY GTD ADJUSTABLE HS DIES 3/8-24 NF ,1/8-27 NPT, 5-40 NC USA CHASE TAP

3 QUALITY GTD ADJUSTABLE HS DIES 3/8-24 NF ,1/8-27 NPT, 5-40 NC USA CHASE TAP

  • United States
  • Jan 30th
Morse Cutting Tools - Greenfield, Regal Deloit, Vermont tap die lot 1/2 1/4 3/8

Morse Cutting Tools - Greenfield, Regal Deloit, Vermont tap die lot 1/2 1/4 3/8

  • Huntley, Illinois, United States
  • Jan 30th
LOT OF 7 - KENNAMETAL PIPE TAPS 1/16-27NPT, 4FL, 2-1/8" OAL KHSST08700 ~ NEW

LOT OF 7 - KENNAMETAL PIPE TAPS 1/16-27NPT, 4FL, 2-1/8" OAL KHSST08700 ~ NEW

  • Sparta, Michigan, United States
  • Jan 30th
GTD tap 2.157 NS 18 HS CG v4

GTD tap 2.157 NS 18 HS CG v4

  • Bedford, Ohio, United States
  • Jan 30th
20pc 8-32 Emuge MultiTap Spiral Point

20pc 8-32 Emuge MultiTap Spiral Point

  • Newington, Connecticut, United States
  • Jan 30th
20pc 6-32 Emuge MultiTap Spiral Point

20pc 6-32 Emuge MultiTap Spiral Point

  • Newington, Connecticut, United States
  • Jan 30th
3pc 6-32 Emuge MultiTap Spiral Flute

3pc 6-32 Emuge MultiTap Spiral Flute

  • Newington, Connecticut, United States
  • Jan 30th
GREENFIELD TAP 13389 M10X1.5 3FL D6 PLUG SPR POINT TAP

GREENFIELD TAP 13389 M10X1.5 3FL D6 PLUG SPR POINT TAP

  • Taylor, Michigan, United States
  • Jan 30th
TAP SPIRAL POINT 7/16-20 3 FLUTE CNC STYLE GH5 HI PERFORMANCE TIN OSG NEW $5.50

TAP SPIRAL POINT 7/16-20 3 FLUTE CNC STYLE GH5 HI PERFORMANCE TIN OSG NEW $5.50

  • North Tonawanda, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies