+ Post new Ad
#16 Bell Combined Drill & Countersink,HS Black Oxide-NEW-TRW USA, Sold by each, US $760 – Picture 0
#16 Bell Combined Drill & Countersink,HS Black Oxide-NEW-TRW USA, Sold by each, US $760 – Picture 0

#16 Bell Combined Drill & Countersink,hs Black Oxide-new-trw Usa, Sold By Each

US $760

  • Brunswick, Georgia, United States
  • May 28th
Open on mobile:
QR code
This is for a #16 Bell Combined Drill & Countersink,HS Black Oxide Finish - MADE IN USA by TRW These countersinks are NEW and sold by the piece. Dimensions: Body Diameter = 1/2", Drill Diameter = 3/16", Bell Diameter = .400, Overall Length = 3"   This countersink is recommended for parts passing through several operations where there is a danger of marring the edges of the center hole, thus destroying the accuracy of the center. The Bell Combined Drill & Countersink produces a 60' (included angle) center, but bevels the outer edges to 120' (included angle) to prevent damage to the center hole. In addition, the Bell Combined Drill & Countersink assures proper width of the bearing surface.

Directions

Similar products from Other Cutting Equipment & Expendables

12" 3-IN-1 SHEET METAL MACHINE SHEAR-BRAKE & ROLLER (8600-4025)

12" 3-IN-1 SHEET METAL MACHINE SHEAR-BRAKE & ROLLER (8600-4025)

  • Chino, California, United States
  • May 29th
Carbide Tipped lathe Cutting tool 5/8" x 5/8" square C-10 C2 Interstate

Carbide Tipped lathe Cutting tool 5/8" x 5/8" square C-10 C2 Interstate

  • Punta Gorda, Florida, United States
  • May 29th
NOS AMERICAN SUN 1" Indexable Center Cutting X-LONG End Mill 3/4" Shank 760-3B

NOS AMERICAN SUN 1" Indexable Center Cutting X-LONG End Mill 3/4" Shank 760-3B

  • Ontario, Canada
  • May 29th
Putnam 29/32" x 1 5/32" Counterbore x # 3 Taper Shank

Putnam 29/32" x 1 5/32" Counterbore x # 3 Taper Shank

  • Coventry, Rhode Island, United States
  • May 29th
CONVEX MILLING CUTTER 1/4" X 2-1/2" X 1" HSS CHINA STK7500

CONVEX MILLING CUTTER 1/4" X 2-1/2" X 1" HSS CHINA STK7500

  • Wadley, Alabama, United States
  • May 29th
Slugger cutter 1 1/8 " X 4" for Hougen drill

Slugger cutter 1 1/8 " X 4" for Hougen drill

  • Selden, New York, United States
  • May 29th
NOS USA AMERICAN SUN 1-1/2" 75 Degree PROFILE Chamfering End Mill 3/4" Shk 754-3

NOS USA AMERICAN SUN 1-1/2" 75 Degree PROFILE Chamfering End Mill 3/4" Shk 754-3

  • Ontario, Canada
  • May 29th
Regal-Beliot 3/4" Geometric Die Head with M4x.7 Chasers

Regal-Beliot 3/4" Geometric Die Head with M4x.7 Chasers

  • Coventry, Rhode Island, United States
  • May 29th
5/8" 32 Left hand threading die Widell USA #348342. Gunsmith machinist.

5/8" 32 Left hand threading die Widell USA #348342. Gunsmith machinist.

  • Fort Lauderdale, Florida, United States
  • May 29th
#1 Combined Drill & Countersink HS, Bright Steel Finish - NEW- Sold by each

#1 Combined Drill & Countersink HS, Bright Steel Finish - NEW- Sold by each

  • Brunswick, Georgia, United States
  • May 28th
#14 Bell Combined Drill & Countersink HSS, Viking Drill USA -NEW - Sold by each

#14 Bell Combined Drill & Countersink HSS, Viking Drill USA -NEW - Sold by each

  • Brunswick, Georgia, United States
  • May 28th
#13 Bell Combined Drill & Countersink,HS Black Oxide-NEW-TRW USA, Sold by each

#13 Bell Combined Drill & Countersink,HS Black Oxide-NEW-TRW USA, Sold by each

  • Brunswick, Georgia, United States
  • May 28th
NOS CANADIAN 5-1/2" Roller Chain Sprocket Cutter 1.750 P, 1.00 D.O.R 35 T +

NOS CANADIAN 5-1/2" Roller Chain Sprocket Cutter 1.750 P, 1.00 D.O.R 35 T +

  • Merrickville, Ontario, Canada
  • May 28th
NOS CANADIAN 4-9/16" Dia. Roller Chain Sprocket Cutter 1.25 CP .750 ROLL 35 T +

NOS CANADIAN 4-9/16" Dia. Roller Chain Sprocket Cutter 1.25 CP .750 ROLL 35 T +

  • Merrickville, Ontario, Canada
  • May 28th
Taper Shank HSS Gear Shaper Cutter M1 Dia 38mm PA 20 Degree Module 1 MT3 Z-38

Taper Shank HSS Gear Shaper Cutter M1 Dia 38mm PA 20 Degree Module 1 MT3 Z-38

  • CN, China
  • May 28th
DDJNR 24 4D - Sandvik Coromant Tool Holder

DDJNR 24 4D - Sandvik Coromant Tool Holder

  • Guelph, Ontario, Canada
  • May 28th
Taper Shank HSS Gear Shaper Cutter M1.75 Dia 38mm PA 20 ° Module 1.75 MT3 Z-22

Taper Shank HSS Gear Shaper Cutter M1.75 Dia 38mm PA 20 ° Module 1.75 MT3 Z-22

  • CN, China
  • May 28th
Taper Shank HSS Gear Shaper Cutter M2 Dia 38mm PA 20 ° Module 2 MT3 Z-19

Taper Shank HSS Gear Shaper Cutter M2 Dia 38mm PA 20 ° Module 2 MT3 Z-19

  • CN, China
  • May 28th
Taper Shank HSS Gear Shaper Cutter M2.25 Dia 38mm PA 20 ° Module 2.25 MT3 Z-16

Taper Shank HSS Gear Shaper Cutter M2.25 Dia 38mm PA 20 ° Module 2.25 MT3 Z-16

  • CN, China
  • May 28th
Carbide burr by WURTH Germany 6mm x 9,6mm (1/4" x 2/5")

Carbide burr by WURTH Germany 6mm x 9,6mm (1/4" x 2/5")

  • St.Petersburg, Russian Federation
  • May 28th

People who viewed this item also vieved

Bridgeport Model E Shaping Attachment w/ mounting bolt (Inv.22853)

Bridgeport Model E Shaping Attachment w/ mounting bolt (Inv.22853)

  • Portland, Connecticut, United States
  • Jan 30th
Bridgeport Model E Shaping Attachment w/ mounting bolt (Inv.22854)

Bridgeport Model E Shaping Attachment w/ mounting bolt (Inv.22854)

  • Portland, Connecticut, United States
  • Jan 30th
10 NEW MITSUBISHI CCMT 32.50.5 CARBIDE INSERTS. GRADE: US 735 {A970}

10 NEW MITSUBISHI CCMT 32.50.5 CARBIDE INSERTS. GRADE: US 735 {A970}

  • Mentor, Ohio, United States
  • Jan 30th
10 NEW TUNGALOY CNMG 432-TH CARBIDE INSERTS. GRADE: T6030 (Y7)

10 NEW TUNGALOY CNMG 432-TH CARBIDE INSERTS. GRADE: T6030 (Y7)

  • Mentor, Ohio, United States
  • Jan 30th
CBN (Cubic Boron Nitride) NR-3025R SPL/CLR Grooving Tool Insert .025 Radius NIB

CBN (Cubic Boron Nitride) NR-3025R SPL/CLR Grooving Tool Insert .025 Radius NIB

  • Collegeville, Pennsylvania, United States
  • Jan 30th
Ceratip NDC 322 DR T00220 TC-50 Ceramic Insert

Ceratip NDC 322 DR T00220 TC-50 Ceramic Insert

  • Johnson City, New York, United States
  • Jan 30th
"P&W" Single End Mill 1" Reground, 6 Flute

"P&W" Single End Mill 1" Reground, 6 Flute

  • Coventry, Rhode Island, United States
  • Jan 30th
3/16" 4 FLUTE NEW "CGS" 140-1875-ALTiN CARBIDE END MILL !! ALTiN COATED !!

3/16" 4 FLUTE NEW "CGS" 140-1875-ALTiN CARBIDE END MILL !! ALTiN COATED !!

  • Brunswick, Ohio, United States
  • Jan 30th
DI-ACRO PUNCH AND DIE 7/32 ROUND

DI-ACRO PUNCH AND DIE 7/32 ROUND

  • Santa Cruz, California, United States
  • Jan 30th
DI-ACRO PUNCH AND DIE 5/8 ROUND

DI-ACRO PUNCH AND DIE 5/8 ROUND

  • Santa Cruz, California, United States
  • Jan 30th
"STANDARD" Chucking FReamer 37/64" Six Flute

"STANDARD" Chucking FReamer 37/64" Six Flute

  • Coventry, Rhode Island, United States
  • Jan 30th
"R.R.T. Carbide Tipped Chuck Reamer .5010" Six Flute

"R.R.T. Carbide Tipped Chuck Reamer .5010" Six Flute

  • Coventry, Rhode Island, United States
  • Jan 30th
Lenox Hackmaster 24" x 2" EDP 22080 4pcs.

Lenox Hackmaster 24" x 2" EDP 22080 4pcs.

  • Georgetown, Kentucky, United States
  • Jan 30th
IDEAL BI-Metal Portable Band Saw Blades Selling A Box Of 3 Blades

IDEAL BI-Metal Portable Band Saw Blades Selling A Box Of 3 Blades

  • Greenville, North Carolina, United States
  • Jan 30th
50pcs carboloy-SECO TPG322 Carbide Inserts TP100 Coated #CAR-TPG322-new

50pcs carboloy-SECO TPG322 Carbide Inserts TP100 Coated #CAR-TPG322-new

  • Madison Heights, Michigan, United States
  • Jan 30th
Valenite MSYNR12CA4 Indexable Insert Cartridge 10-72517-04

Valenite MSYNR12CA4 Indexable Insert Cartridge 10-72517-04

  • Lebanon, Tennessee, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies