+ Post new Ad
16 STOP CAMCO 601RDM16H224-270 Rotary Indexer, CNC Index Drive, Rotary Table, US $650.00 – Picture 0
16 STOP CAMCO 601RDM16H224-270 Rotary Indexer, CNC Index Drive, Rotary Table, US $650.00 – Picture 0

16 Stop Camco 601rdm16h224-270 Rotary Indexer, Cnc Index Drive, Rotary Table

US $650.00

  • Escondido, California, United States
  • Aug 4th
Open on mobile:
QR code
16 POSITION  CAMCO  601RDM16H224-270  Rotary Indexer, CNC Index Drive, Rotary Table A very hard to find 16 step Camco indexing table with 20:1 ratio gear reducer and a DC motor as shown This is a new old stock indexer that got wet while in storage-see pictures for details We removed the outer aluminum clamping ring to inspect the condition of the indexing table/disk and outer bearing  (this aluminum ring is shown in it's proper place in our third included picture) There is rust on the top face and edge of the indexing disk where the outer seal rubs against it. The water did not enter the mechanism inside, it was stopped by the rubber seal and and a heavy layer of packing grease just below it Look carefully at the pictures of the four mounting feet and you can see that only two of the mounting holes have signs of being used (from when it was shipped while bolted down to a piece of plywood) The color shift in some of our pictures is from using the flash attachment on our camera only for those pictures.... This indexer will need to be partially disassembled, cleaned, re-greased and re-assembled before use, (that is why we are listing it as;  for parts or repair) Weight to ship will be about 70 pounds Local pickup is an option also in north San Diego county
“This is a new old stock indexer that got wet while in storage-see pictures for detals”
Operation CNC
Brand CAMCO

Directions

Similar products from Rotating Tables

Haas 17 pin 5c collet indexer w/controller . For parts, not working

Haas 17 pin 5c collet indexer w/controller . For parts, not working

  • Hamburg, New York, United States
  • Aug 5th
4'x4' Laguna Swift CNC Router, 2019 - 4th Axis Positional Included, Vacuum Table

4'x4' Laguna Swift CNC Router, 2019 - 4th Axis Positional Included, Vacuum Table

  • Seattle, Washington, United States
  • Aug 5th
HA5C-2010 indexer

HA5C-2010 indexer

  • Chatsworth, California, United States
  • Aug 5th
9,000 LB. X 48'' X 144'' ADVANCE HYDRAULIC DOUBLE SCISSOR PLATFORM LIFT TABLE: S

9,000 LB. X 48'' X 144'' ADVANCE HYDRAULIC DOUBLE SCISSOR PLATFORM LIFT TABLE: S

  • Toledo, Ohio, United States
  • Aug 5th
Palmgren 8" Rotary Table Cross Slide Craftsman Machinist Rotary Table Milling

Palmgren 8" Rotary Table Cross Slide Craftsman Machinist Rotary Table Milling

  • Lombard, Illinois, United States
  • Aug 5th
Brand New 4" Rotory Table with 3 Jaw Chuck

Brand New 4" Rotory Table with 3 Jaw Chuck

  • Eastlake, Ohio, United States
  • Aug 5th
Eimeldingen KTS325A rotary tilting table

Eimeldingen KTS325A rotary tilting table

  • Irvine, California, United States
  • Aug 4th
HAAS MAG MOTOR FOR HRT 310 - 210 - 450 - 600 HAAS PT NO 93-4517

HAAS MAG MOTOR FOR HRT 310 - 210 - 450 - 600 HAAS PT NO 93-4517

  • South Windsor, Connecticut, United States
  • Aug 4th
HAAS MCB 10 AMP 3POLE LONG DELAY BREAKER PART# 61-7335 / 61-7361

HAAS MCB 10 AMP 3POLE LONG DELAY BREAKER PART# 61-7335 / 61-7361

  • South Windsor, Connecticut, United States
  • Aug 4th
HAAS MCB 10 AMP 2POLE LONG DELAY BREAKER PART# 61-7300 / 61-7359

HAAS MCB 10 AMP 2POLE LONG DELAY BREAKER PART# 61-7300 / 61-7359

  • South Windsor, Connecticut, United States
  • Aug 4th
3"/75MM TILTING ROTARY TABLE WITH 65 MM MINI LATHE CHUCK FOR MILLING MACHINE

3"/75MM TILTING ROTARY TABLE WITH 65 MM MINI LATHE CHUCK FOR MILLING MACHINE

  • GURGAON, HARYANA, India
  • Aug 4th
Walter 20" Horizontal Rotary T-Slot Table Model Type RT500T

Walter 20" Horizontal Rotary T-Slot Table Model Type RT500T

  • San Pedro, California, United States
  • Aug 4th
SMW RT 160 Rotary Indexer CNC 4th Axis Rotary Table + Accu-Smart 50 Controller

SMW RT 160 Rotary Indexer CNC 4th Axis Rotary Table + Accu-Smart 50 Controller

  • Santa Clarita, California, United States
  • Aug 4th
SMW Accu Smart 55 control fits SMW 4th axis rotary tables indexers Controller

SMW Accu Smart 55 control fits SMW 4th axis rotary tables indexers Controller

  • Santa Clarita, California, United States
  • Aug 4th
Excitron 8 inch motorized rotary table (Table only)

Excitron 8 inch motorized rotary table (Table only)

  • Georgia, Georgia, United States
  • Aug 4th
Small Watchmaker 2-3/4" (2.75 Inch) Rotary Table for Milling Operation Machine

Small Watchmaker 2-3/4" (2.75 Inch) Rotary Table for Milling Operation Machine

  • DELHI, DELHI, India
  • Aug 4th
Tombstone Horizontal Machining Center Fixture 6" x 22" x 4 (2) 609

Tombstone Horizontal Machining Center Fixture 6" x 22" x 4 (2) 609

  • Houston, Texas, United States
  • Aug 4th
Tombstone Horizontal Machining Center Fixture 10" x 18" x 4 611

Tombstone Horizontal Machining Center Fixture 10" x 18" x 4 611

  • Houston, Texas, United States
  • Aug 4th
Anderungsstand Bestandsnummer Precision Tombstone 12" x 44" x 4 606

Anderungsstand Bestandsnummer Precision Tombstone 12" x 44" x 4 606

  • Houston, Texas, United States
  • Aug 4th
WEISS TC0120G/TC120G Round index table with servomotor AZKA 56L-4T

WEISS TC0120G/TC120G Round index table with servomotor AZKA 56L-4T

  • Brno, Czech Republic
  • Aug 4th

People who viewed this item also vieved

PRECISION MACHINIST STEEL MULTI-SURFACE V-BLOCK 2" CAPACITY

PRECISION MACHINIST STEEL MULTI-SURFACE V-BLOCK 2" CAPACITY

  • Chino, California, United States
  • Jan 30th
PAIR OF PRECISION MACHINIST STEEL 1-2-3 BLOCKS

PAIR OF PRECISION MACHINIST STEEL 1-2-3 BLOCKS

  • Chino, California, United States
  • Jan 30th
Suburban Tool Value Line (14) 3/8-16 (4) C'Bores for 3/8

Suburban Tool Value Line (14) 3/8-16 (4) C'Bores for 3/8

  • Oklahoma City, Oklahoma, United States
  • Jan 30th
1MT Taper Shank Live Center, 25/32" Point Diameter, 1-3/16" Point Length (44C)

1MT Taper Shank Live Center, 25/32" Point Diameter, 1-3/16" Point Length (44C)

  • Saint Louis, Missouri, United States
  • Jan 30th
GEPY PRECISION LIVE CENTER 4MT SHANK

GEPY PRECISION LIVE CENTER 4MT SHANK

  • Ellington, New York, United States
  • Jan 30th
FAVOR DAV2 LIVE CENTER, 3MT

FAVOR DAV2 LIVE CENTER, 3MT

  • Bremen, Indiana, United States
  • Jan 30th
Bison 5" .0004" TIR, 6000 RPM TRU Leng. 5C Collet Chuck

Bison 5" .0004" TIR, 6000 RPM TRU Leng. 5C Collet Chuck

  • Hamden, Connecticut, United States
  • Jan 30th
Bison 5" .0004" TIR, 6000 RPM Universal Forged Steel 5C Collet Chuck

Bison 5" .0004" TIR, 6000 RPM Universal Forged Steel 5C Collet Chuck

  • Hamden, Connecticut, United States
  • Jan 30th
Bison 6" 3-Jaw Self-Centering Rotating Lathe Chuck w/MT#5 Shank

Bison 6" 3-Jaw Self-Centering Rotating Lathe Chuck w/MT#5 Shank

  • Hamden, Connecticut, United States
  • Jan 30th
Worth Claw Hammer 12 1/2" long

Worth Claw Hammer 12 1/2" long

  • Castalia, Ohio, United States
  • Jan 30th
10" long nail puller

10" long nail puller

  • Castalia, Ohio, United States
  • Jan 30th
PONY 3/4" CLAMP FIXTURE NIB/NOS

PONY 3/4" CLAMP FIXTURE NIB/NOS

  • Salem, Ohio, United States
  • Jan 30th
1PC MTB4 ER32 Collet Chuck Holder Morse4# Taper M16 Thread ER Toolholding Holder

1PC MTB4 ER32 Collet Chuck Holder Morse4# Taper M16 Thread ER Toolholding Holder

  • GuangDong, China
  • Jan 30th
Cnc Mill Lathe Router ER25 Collet Straight Shank Extend 150mm spindle Dia 25MM

Cnc Mill Lathe Router ER25 Collet Straight Shank Extend 150mm spindle Dia 25MM

  • default, default, Hong Kong
  • Jan 30th
Cnc Millling Machine lathe ER20 Straight Shank Extend 150mm spindle Dia 20MM

Cnc Millling Machine lathe ER20 Straight Shank Extend 150mm spindle Dia 20MM

  • default, default, Hong Kong
  • Jan 30th
LYNDEX 16C 13/64 DIA COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7294

LYNDEX 16C 13/64 DIA COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7294

  • Dayton, Ohio, United States
  • Jan 30th
LYNDEX 7/8 HEX 16C COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7278

LYNDEX 7/8 HEX 16C COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7278

  • Dayton, Ohio, United States
  • Jan 30th
LYNDEX 16C 1/16 COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7300

LYNDEX 16C 1/16 COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7300

  • Dayton, Ohio, United States
  • Jan 30th
1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP400-4

1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP400-4

  • Wadley, Alabama, United States
  • Jan 30th
1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP500-2

1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP500-2

  • Wadley, Alabama, United States
  • Jan 30th
LATHE CHUCK BACK PLATE 12-1/2" DIAMETER D1-8 MOUNT

LATHE CHUCK BACK PLATE 12-1/2" DIAMETER D1-8 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
TONFOU HYDRAULIC POWER CHUCK TF3B-10-A6 A8 10" 3 JAW

TONFOU HYDRAULIC POWER CHUCK TF3B-10-A6 A8 10" 3 JAW

  • Orange, California, United States
  • Jan 30th
TANSHING VRNC-210 4TH AXIS ROTARY TABLE WITH SERVO MOTOR MANUAL TAILSTOCK

TANSHING VRNC-210 4TH AXIS ROTARY TABLE WITH SERVO MOTOR MANUAL TAILSTOCK

  • Orange, California, United States
  • Jan 30th
TANSHING VRNC-125 4TH AXIS ROTARY TABLE WITH SERVO MOTOR MANUAL TAILSTOCK

TANSHING VRNC-125 4TH AXIS ROTARY TABLE WITH SERVO MOTOR MANUAL TAILSTOCK

  • Orange, California, United States
  • Jan 30th
Ridgid # 21 Bench Pipe Yoke Vise 1/8” to 2"

Ridgid # 21 Bench Pipe Yoke Vise 1/8” to 2"

  • Downingtown, Pennsylvania, United States
  • Jan 30th
Ridgid #3DP Drill Press Vise, vintage

Ridgid #3DP Drill Press Vise, vintage

  • Jetmore, Kansas, United States
  • Jan 30th
Bessey BV-DP40 Drill Press Vise

Bessey BV-DP40 Drill Press Vise

  • Tiffin, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies