18 bandsaw for sale, brand-new and used.

180 FEET of a premium Lenox Master Grit band saw Enough for 12-18 blades. We will cut and weld to your size at no cost! 1" wide .035 thickness Coarse grit Made in the USA.

One new Lenox Mastergrit bandsaw blade 11' 4" or 136" long may fit the Delta/Jet 18" saws and others. box may be deteriorated and some surface rust or dust may be present from storage. Check the pictures and feel free to ask questions.

One Morse carbon hard back bandsaw blade, 11' 5" or 137", 3/4" 10 tpi, new but the box is dented and the blade has a little rust from storage. May fit Delta/Jet 18", Wellsaw 1016, W. F.

DESCRIPTION: 20” X 20” DOUBLE COLUMN HEAVY DUTY AUTOMATIC BANDSAW WITH MANUAL, SEMI-AUTO AND FULL AUTO FEED MODES, 5,000 LB S MATERIAL SHUTTLE CAPACITY, POWERED BLADE GUIDE ARM, SPLIT FRONT HYDRAULIC VISES, AND HEAVY DUTY ROLLERWAYS FOR MATERIAL FEED. GENERAL SPECIFICATIONS MAX. CUTTING CAP.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

You are bidding on 3 brand new Jet Bandplus bandsaw blades. Model numbers 709291(2) & 709289 (1). The specs for the blades are 709291 w 3/8"- gauge 0.25" - TPI 4- hook type.

**NEW** MiniMax S45N 18" Bandsaw; (1ph) 2.5 hp **SALE NOW**

THIS IS A BRAND NEW GRIZZLY G0514X3 19"BANDSAW NEW. IT WAS SET UP AND RAN SOME TEST CUTS AND NEVER USED AFTER THAT,HAS SOME MINOR SURFACE RUST ON TABLE THAT COME RIGHT OFF. THIS THING IS AN AWESOME MACHINE AND A GREAT DEAL!!!!!!!!!!!!!!!!

This is a 1955 enterprise most likely built by Cresent 18in bandsaw a 5hp 3 phase motor that ha s been fully restored and is ready for full service comes with a 1/2 blade and a 1/4 blade. Come with a fence and rear fence. Has a 18\" real capacity and I 30\" throat for very large pieces.

ACCURA 16", 18" BANDSAW UPPER BLADE GUIDE SYSTEM-FITS MOST SAWS. Accura 16", 18" Bandsaw Upper Blade Guide System-Fits most Saws. with ball bearing roller.

For sale is a new Lenox brand bandsaw blade with the following specifics: LENOX DIEMASTER 2 Bandsaw Blade Engineered for Contour Cutting Length (ft / in / frac) Width Tooth Set 5 3 1/2 (.020) 14/18 V This is a great bandsaw blade, but for my smaller bandsaw, this blade is too wide for me to use. So I am offering it at a great price with Free Shipping. Thanks for looking.

Good running Saw. See under Power in Tul

PORTABLE BAND SAW MIKESKA RPP 290

Unused with defect Qty. (1) Jet JWBS-18 Woodcutting Bandsaw purchased in October of 2004, uncrated and placed on the "dolly" seen in photo (1). The photos provided are as follows: 1.) Machine - front 2.) Right Side & Wheel Well Misalignment 3.) Back

If you have any questions regarding this machine, please contact Edward @ (909) 991-9600 Make: Shopsmith Model: Mark V Condition: Good Features: Multiple Applications Attachments allow for various functions Specifications: Lathe: Swing: 15" Table Saw Table Dimensions: 14" x 19" Table Tilt: 45 degrees Arbor: 5/8" Travel: 4-1/4" Bed Post Diameters: 1-3/4" Bandsaw: Bandsaw Table Dimensions: 11-3/4" x 12" Dovetail / Slot Width: 0.725

Hercules S330/2 STANDARD SPARTAN MODEL Hercules S330/2 SWIVEL HEAD, HIGH SPEED, HORIZONTAL, METAL CUTTING BANDSAW WITH 3 H.P., AND 60 DEGREE MITER CUTTING. Capacity @ 90°: 12” H x 18” W Rectangle (300 x 460 mm), 13” Round (330mm) Capacity @ 45°: 11” H x 12” W Rectangle (280 x 300 mm), 13” Round (330mm)

Grob  4V-18 vertical bandsaw No blades included. Has welder attachment for blade repair. Wired for 230

One Preowned Hyd-Mech Horizontal Bandsaw Model S23 Specifications Capacity: Rectangle: 6" x 18"; Round: 16" diameter; 45 degree Round: 15" diameter Blade: 15'6" x 1-1/4" x .042 Blade Drive Motor: 5 HP Blade Speed: 75-400 SFM (infinitely variable) Blade Wheel Diameter: 19" Coolant Tank: 6 U.S. gallons Vise Control: Manual Table Height: 31" Maximum Work Load: 5,000 LBS Machine Weight: 2,000 LBS Dimensions: 85"W x 81"L x 66"H Equipped With 3' Roller Infeed Table Outfeed Table