+ Post new Ad
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 0
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 1
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 2
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 3
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 4
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 0
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 1
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 2
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 3
18 Sheets Of New Kydex V-Black 52114 .08" - 12"X12" Thermoforming Material, US $59.99 – Picture 4

18 Sheets Of New Kydex V-black 52114 .08" - 12"x12" Thermoforming Material

US $59.99

  • Cleveland, Tennessee, United States
  • Feb 13th
Open on mobile:
QR code
This lot includes 2- 8 packs & 2- single sheets of Kydex. The 8 packs are in original packaging and unopened.  Features Kydex® V is a recycled grade of Kydex® 100 and Kydex® T Higher breakage resistance than competitive thermoplastics as measured by the Notched Izod test Among the most rigid of thermoforming materials with a modulus of elasticity of 2,482 MPa (360,000 psi) Easy to form with excellent part definition and deep-draw characteristics Great for knife sheaths and gun holsters KYDEX® V sheet has excellent forming properties, which results in uniform wall thicknesses and crisp detail. KYDEX® V sheet forms to deep draws with low forces when heated to the upper end of the forming temperature range. Unlike many other thermoforming sheets, KYDEX® V sheet has unusually high resistance to hot tearing.  Forming Guidelines  - Oven temperatures should be set differently than the settings used for ABS or FR-ABS.  - Typical heater settings (percentage timers) are 30% - 50% top heaters and 50% - 70% bottom heaters.  - The most frequent problem is trying to heat the sheet too quickly, particularly on the primary surface.  - Cycle times will vary depending on the oven conditions and grade of KYDEX® V sheet being formed.  - When forming KYDEX® V sheet, it is better to rely on the sheet appearance during heating than on fixed cycle times.  - Forming temperatures - Guidelines: (Sheet should not exceed 204°C (400°F). 
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model V-Black-52114-.080"
Brand Kydex

Directions

Similar products from Other Plastic & Rubber Materials

Wilsonart / Pampas 4166-60 48" x 96" Matt Finish Sheets

Wilsonart / Pampas 4166-60 48" x 96" Matt Finish Sheets

  • Huntington Station, New York, United States
  • Feb 13th
box of teflon delrin uhmw plastics pieces various types and shapes sample box

box of teflon delrin uhmw plastics pieces various types and shapes sample box

  • Harwood, Maryland, United States
  • Feb 13th
Silicon tubing 100ft .125"ID 1/16" wall thickness

Silicon tubing 100ft .125"ID 1/16" wall thickness

  • Wellington, Ohio, United States
  • Feb 13th
SILICONE WASHERS 3/8" THICK

SILICONE WASHERS 3/8" THICK

  • Hesperia, California, United States
  • Feb 13th
Viton Rubber Washers 1/32" Thick 1" X 1/4"x 1/32" 200 Washers

Viton Rubber Washers 1/32" Thick 1" X 1/4"x 1/32" 200 Washers

  • Hesperia, California, United States
  • Feb 13th
Virigin Teflon Rod 3 1/2" X 10" White

Virigin Teflon Rod 3 1/2" X 10" White

  • Goshen, Indiana, United States
  • Feb 13th
Teflon rod .625- 40 ft in total length type FEP

Teflon rod .625- 40 ft in total length type FEP

  • Lake Grove, New York, United States
  • Feb 13th
Viton Rubber Washers Thick 1" X 1/4"x 3/32" 100 Washers

Viton Rubber Washers Thick 1" X 1/4"x 3/32" 100 Washers

  • Hesperia, California, United States
  • Feb 13th
Fluoroslicone Sheets Strips 1/16" Thick Blue

Fluoroslicone Sheets Strips 1/16" Thick Blue

  • Hesperia, California, United States
  • Feb 13th
Quailty virgin PVC white plastic pellets

Quailty virgin PVC white plastic pellets

  • Cincinnati, Ohio, United States
  • Feb 13th
48" x 72" ABS 1/8" black sheet Smooth Paintable one side with Korad cap

48" x 72" ABS 1/8" black sheet Smooth Paintable one side with Korad cap

  • Edmonton, Alberta, Canada
  • Feb 13th
.020" THICK WHITE POLYSTYRENE PLASTIC SHEET 24" x 36" LIGHT DIFFUSING

.020" THICK WHITE POLYSTYRENE PLASTIC SHEET 24" x 36" LIGHT DIFFUSING

  • Mooresville, Missouri, United States
  • Feb 13th
PLASTIC PELLETS SURPLUS CRAFT CORNHOLE BAGS STUFFING 11 POUNDS

PLASTIC PELLETS SURPLUS CRAFT CORNHOLE BAGS STUFFING 11 POUNDS

  • Merritt Island, Florida, United States
  • Feb 13th
PLASTIC PELLETS SURPLUS CRAFT CORNHOLE BAGS STUFFING 6 POUNDS

PLASTIC PELLETS SURPLUS CRAFT CORNHOLE BAGS STUFFING 6 POUNDS

  • Merritt Island, Florida, United States
  • Feb 13th
PLASTIC PELLETS SURPLUS CRAFT CORNHOLE BAGS STUFFING SMALL FLAT RATE 1-1/2 LBS

PLASTIC PELLETS SURPLUS CRAFT CORNHOLE BAGS STUFFING SMALL FLAT RATE 1-1/2 LBS

  • Merritt Island, Florida, United States
  • Feb 13th
Nylon Bar 5" X 26-3/4" X 1/2" bearing bushing mount support slide (L1)

Nylon Bar 5" X 26-3/4" X 1/2" bearing bushing mount support slide (L1)

  • White Lake, Michigan, United States
  • Feb 13th
Polyethylene PE-HWST solid round stock 1.530" X 28" rod nylon slide 1-1/2 (K1)

Polyethylene PE-HWST solid round stock 1.530" X 28" rod nylon slide 1-1/2 (K1)

  • White Lake, Michigan, United States
  • Feb 13th
CLEAR POLYCARBONATE ROD - 1" Diameter - 10 3/4" LONG

CLEAR POLYCARBONATE ROD - 1" Diameter - 10 3/4" LONG

  • Hines, Minnesota, United States
  • Feb 13th
1 lenticular sheet 15” X 20” Back To The Future 2 hat rainbow material

1 lenticular sheet 15” X 20” Back To The Future 2 hat rainbow material

  • Southbridge, Massachusetts, United States
  • Feb 13th
WHITE STYRENE POLYSTYRENE PLASTIC SHEET .010" THICK 8.5" X 12" LIGHT DIFFUSING

WHITE STYRENE POLYSTYRENE PLASTIC SHEET .010" THICK 8.5" X 12" LIGHT DIFFUSING

  • Mooresville, Missouri, United States
  • Feb 13th

People who viewed this item also vieved

Trim-Lok 3100B3X1/8A-25 EPDM Closed Cell Sponge Rubber/PVC/Aluminum Trim Seal

Trim-Lok 3100B3X1/8A-25 EPDM Closed Cell Sponge Rubber/PVC/Aluminum Trim Seal

  • USA, United States
  • May 28th
Sponge Neoprene Stripping With Adhesive 1 Inch Wide X 1/4 Inch Thick X 35 Feet

Sponge Neoprene Stripping With Adhesive 1 Inch Wide X 1/4 Inch Thick X 35 Feet

  • US, United States
  • May 28th
Recycled Rubber - Rubber Sheets and Rolls - 5mm Thick x 4ft Width x 6ft Length -

Recycled Rubber - Rubber Sheets and Rolls - 5mm Thick x 4ft Width x 6ft Length -

  • US, United States
  • May 28th
Recycled Rubber - 60A - Rubber Sheets and Rolls - 5mm Thick x 6" Width x 6" - 5

Recycled Rubber - 60A - Rubber Sheets and Rolls - 5mm Thick x 6" Width x 6" - 5

  • US, United States
  • May 28th
WHITE POLYETHYLENE HDPE PLASTIC SHEETS 0.060" X 8" X10" VACUUM FORMING

WHITE POLYETHYLENE HDPE PLASTIC SHEETS 0.060" X 8" X10" VACUUM FORMING

  • Ocala, Florida, United States
  • May 29th
Socket Fusion x Brass Threaded Transition 1-1/4" IPS x 1-1/4" MPT

Socket Fusion x Brass Threaded Transition 1-1/4" IPS x 1-1/4" MPT

  • Fargo, North Dakota, United States
  • May 29th
LOT OF 3--- 2" IPS Socket Fusion 90 deg Elbow BLACK

LOT OF 3--- 2" IPS Socket Fusion 90 deg Elbow BLACK

  • Fargo, North Dakota, United States
  • May 29th
2" CAP IPS Socket fusion fitting BLACK

2" CAP IPS Socket fusion fitting BLACK

  • Fargo, North Dakota, United States
  • May 29th
1" 39" x 4.125" Clear Acrylic Plexiglass Cell Cast Virgin material #I3

1" 39" x 4.125" Clear Acrylic Plexiglass Cell Cast Virgin material #I3

  • Winthrop, Minnesota, United States
  • May 30th
1.25" 31" x <3" Clear Acrylic Plexiglass Cell Cast Virgin material #J5

1.25" 31" x <3" Clear Acrylic Plexiglass Cell Cast Virgin material #J5

  • Winthrop, Minnesota, United States
  • May 30th
1&#034; 30&#034; x 3.75 &#034; Clear Acrylic Plexiglass Cell Cast Virgin material #J4

1" 30" x 3.75 " Clear Acrylic Plexiglass Cell Cast Virgin material #J4

  • Winthrop, Minnesota, United States
  • May 30th
1&#034; 30&#034; x 3.75 &#034; Clear Acrylic Plexiglass Cell Cast Virgin material #J3

1" 30" x 3.75 " Clear Acrylic Plexiglass Cell Cast Virgin material #J3

  • Winthrop, Minnesota, United States
  • May 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies