US $425.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “See photos” |
Directions
Similar products from Fittings & Plates
SUBURBAN TOOL SP66-S1 COMPOUND SINE PLATE 6" x 6" WITH SIDE RAIL EXTRA FIXTURE
30" x 20" Aluminum Milled Custom Vacuum Table Plenum (from Clampusystems)
South Bend Atlas Clausing Face Plate T-Slot 8"
LATHE FACEPLATE 11 INCH. 1 5/8" - 8 THREADS 1 1/8" thick
6 x 16 Inch Precision Slide Table (Inv.32011)
Cast Iron Angle Plate 7.5 x 8 x 7 in.
5C Collet Fixture, Horizontal/Vertical, Non-Indexing | (31B) FRA
SPI, 6"x 6" x 2" Sine Plate, SS1, NEW p/n 86456951
Jones & Lamson comparator stage bench centers
16T x 14D x 8-5/8" W Angle Plate
SUBURBAN 6 X 12 SINE PLATE FOR MAG CHUCK
Parallel Set, Nice Machinist Toolmaker Parallel Set, 1", 1-1/4", 1-1/2" & 1-3/4"
NICE! MACHINIST PRECISION SINE PLATE 6" X 5"
NICE! ECLIPSE NO. 312 TILTING SWIVEL ANGLE PLATE TABLE 5" X 7" X 5"
HARDINGE H-4 5C COLLET INDEXER / FIXTURE + 1/16" ROUND COLLET
HARDINGE H-4 5C COLLET INDEXER / FIXTURE + 1" ROUND COLLET
ENGLAND! ECLIPSE 4-1/2" x 3-5/8" x 3" SLOTTED MACHINIST STEEL ANGLE PLATE - #301
16" SLOTTED MOUNTING FACE PLATE LATHE D1-6 ? CAMLOCK SPINDLE MOUNT
8" LATHE DOG DRIVE FACE PLATE W/ 2-1/4"-6 TPI THREAD MOUNT
12" METAL LATHE FACE PLATE FITS ANY 12"+ LATHE
People who viewed this item also vieved
MACHINIST TOOLS * R8 COLLETS * KENT * 1 LOT (5)
MACHINIST TOOLS * R8 COLLETS * HARDINGE * 1 LOT (8)
USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER
HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")
USED LATHE DEAD CENTER #8 JARNO (1.038" Point Diameter)
DE-STA-CO 484 Toggle Clamp, Squeeze Action, Wide Jaw (2 Clamps)
DE-STA-CO Strait Line Toggle Clamp 624 ** New !!! **
C Clamp, (1) SARGENT & CO. 5" , Made in USA
Gator FLE-160D4 D1-4 MACHINED CAST-IRON ADAPTER FOR 6' CHUCKS
Gator 1-903-0800 8.25' 6 Jaw Self Centering Universal Lathe Chuck
TTC SPT10100T2 American Standard Tongue and Groove Soft Jaws - Pack of 3
Enco Model #42023 Drill Press Vise
2 Piece Set Vintage Small Toolmakers Parallel Clamps Machinist Tools
# 3 CLAMP ON PIPE VISE HINGED TYPE PLUMBING TOOLS
6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING
Hardened and ground Vee block set
Starrett 278 V- Blocks Set & Clamps Nice
Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long
Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long
Dumont Keyway Broach Bushing 1 7/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long
7" x 7" Cross Slide Rotary Table
Haas Ha5C Brush Style 5C Collet Rotary Table Indexer 4th axis & servo control bo
Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis & control
GoDog Dinos Bruto With Chew Guard Large-Purple
"Cubics Platina Fixed Circular Needles 24""-Size 11/8mm"
Magni-Clips Magnifiers-+1.00 Magnification
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies