1800W Dual Temperature Ceramic Heater Electric Heat/Hot Air Gun Paint Stripper, US $29.61 – Picture 0

1800W Dual Temperature Ceramic Heater Electric Heat/Hot Air Gun Paint Stripper, US $29.61 – Picture 1

1800W Dual Temperature Ceramic Heater Electric Heat/Hot Air Gun Paint Stripper, US $29.61 – Picture 2

1800W Dual Temperature Ceramic Heater Electric Heat/Hot Air Gun Paint Stripper, US $29.61 – Picture 3

1800w Dual Temperature Ceramic Heater Electric Heat/hot Air Gun Paint Stripper

US $29.61

HK, Hong Kong
Jan 31st

Open on mobile:
QR code

1800W Multi-Function Professional Dual Temperature Electric Heat/Hot Air Gun Description 1.The Scope of Application: Heat gun can be used to melt or soften the paint or plastic material .Apply to remove the old paint, bend plastic pipes, change floor ties, repair mobile phone, car decorate, fridge defrost, etc.(See a variety of purposes and methods of introduction). Meanwhile, in the course of using, just select the appropriate temperature and the best distance, It will not have adverse effects on other objects, It will provide the best decoration for your help and satisfactory results. 2.The use of program • Heat Gun start first switched on, pull the switch to low paragraph or high -paragraph, after hear the "Buzz" sounds(that motor in driving),electric thread will gradually become red. It will emit a little smoke. It is because that the electric wire coated with a layer of yellow oil, which is used for anti-rust. The smoke will soon disappear. When it is used for a period of time, the front tube, such as changing black, it is a phenomenon that occurs when temperature is high, For the use of heat gun is no harm. • If the motor does not rotate in use, we should immediately pull the switch to the zero position, and pull out the power plug, and then a heat gun for this failure to send the point of sale or manufacturer to fix. • To stop using, they should immediately pull the zero position switch, and the white tube of heat gun upright on the plane, whose head is up. It can make it natural cooling, Such as tin tube head down, the heat inside will not soon be distributed, leading to the internal motor temperature will go up, at the same time it will reduce the life of heat gun, You should touch the white tubes to make sure that they have been cold. Then you can put away them. • In order to contribute to cool heat gun and to prevent other accidents, The cessation of use,it will start with a heat gun switch high -paragraph (1) to the low paragraph (2),to fifteen seconds after the blow, And then transfer from the lower zero, and promptly pull the plug. Feature: Voltage Supply: 220-240V Frequency: 50-60Hz Power: 1800W Temperate Range: 400-600 Degree Heater: Ceramic Heater Air Quantity: 200/480 Package: 1 Set Heat Gun 1 English Manual On Aug-18-14 at 20:29:24 PDT, seller added the following information:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	RETUNE
MPN	65496461
Model	RT-883
Country/Region of Manufacture	China