US $14.05
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
MPN | 17884 |
| Quantity | 1 | ||
| Brand | Suncoast Brand | ||
| Coating | None | ||
| Model | 17884 | ||
| Shank Diameter | 5/16in. | ||
| Helix Angle | 30° Helix | ||
| Overall Length | 2-1/2in. | ||
| Material | Carbide | ||
| Cutting Diameter | 19/64in. | ||
| Flutes | 4-Flute | ||
| End Type | Single End | ||
| Country/Region of Manufacture | United States | ||
| Flute Length | 13/16in. | ||
| Primary Application(s) | Finish Profiling |
Directions
Similar products from End Mills Router & Drill Bits
Mixed LOT of Cutting/End MIll Bits
1/32" Square End Mill 4-Flute 1-1/2" Long, Carbide new make offer ((Loc 14))
Lot Of (5) New 4 Flute Accupro Solid Carbide End Mills 1/4" Stub
Niagara Cutter 3/4" two flute doulde end mill
Niagara Cutter 7/8" x 3 3/4"x 7/8 shaft/ Two Flute End Mill 57285
Lot Of 2 Osg Tap And Die 5/8" CD & SD Solid Carbide End Mills Tialn Coated USA
END MILL NIAGARA 7/8''X3 3/4" 20284 TWO FLUTE
1 New 3/8" SGS Solid Carbide Stub 4 Flute End Mill
1/2" Accupro 4 Flute Solid Carbide End Mill Lot Of (2) Great Value!
1/8" Diameter, 1" LOC 2 Flute Single End Extra Long Carbide End Mill USA #10177
3/8" Diameter, 1" LOC 4 Flute Single End AlTiN Carbide End Mill USA #56635
10 Pack 3/8" 4 Flute Single End Uncoated 1"LOC YG-1 Carbide End Mills
CARBIDE END MILLS 1/16 4 FLUTE USA NEW GREAT PRICE !!!
1 New 3/4" SGS Solid Carbide Stub 4 Flute End Mill Made In The USA
2 New GARR 1/2" Solid Carbide End Mills Lot Great Roughing & Finishing Combo
Lot Of (2) New 3/4" OSG Solid Carbide 4 Flute End Mill Made In The USA
Lot Of (3) New 3/4" OSG Solid Carbide 4 Flute End Mill Made In The USA
1 NEW SOLID CARBIDE ENDMILL. 7/16" DIAMETER. 4 FLUTE USA (Z370)
15 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. DOUBLE END. USA MADE E738
1 NEW KENNAMETAL 12 MM DIAMETER CARBIDE ENDMILL. 4 FLUTE. KC 610 COATED. E619
People who viewed this item also vieved
TPKN TPK 43P2 R 2030 2204 SANDVIK *** 10 INSERTS *** 1 FACTORY PACK
R300 2570M PH 4230 SANDVIK *** 10 INSERTS *** 1 FACTORY PACK
NEW 3 MORSE TAPER SHANK X 1 3/16" EXPANSION REAMER - CARBIDE TIPPED
Machine Chucking Reamers 3/16" 6FL HSS Straight Qty 2 <1923>
Hex Rethreading Dies M10x0.75 Carbon Steel A1 419-10075 Qty 2 <1988>
Hertel Welded Band Saw Blade Matrx II 14' 6" ( 174" ) x 3/4" x .035 x 5/8V
Hertel Welded Band Saw Blade HBA85050D 14'8" ( 176" ) x 3/4" x .035 x 6/10 T
MAGNETIC DRILL SLUGGER U.S.A. ANNULAR DRILL BIT 1- 3/16" CUTTER 3/4" DRIVE SHANK
MAGNETIC DRILL SLUGGER U.S.A. ANNULAR DRILL BIT 11/16" CUTTER 3/4" DRIVE SHANK
VNMG 332 VN8 VALENITE Ceramic Inserts (10 pcs) New&Original
VNMG 332 TN60 CERATIP Ceramic Inserts (19 pcs) New&Original
(2) Hassay Savage HSS 8mm III Keyway Broach. USED
Hougen Annular Cutter 18 mm 17412 RotaLoc Plus Cutter
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies