+ Post new Ad
1988 BOY 55-TON PLASTIC INJECTION MOLDING MACHINE, US $4,500.00 – Picture 0
1988 BOY 55-TON PLASTIC INJECTION MOLDING MACHINE, US $4,500.00 – Picture 0

1988 Boy 55-ton Plastic Injection Molding Machine

US $4,500.00

  • Miami, Florida, United States
  • Aug 4th
Open on mobile:
QR code
BOY 55 US TONS PLASTIC INJECTION MOLDING MACHINE, MODEL 50T, 2.45 OZ (70 GRAMS), MAN. IN 1988, DIPRONIC CONTROLS, 14.17" x 13.19" TIE BAR SPACING, 25.59" (650 MM) MAX DAYLIGHT 15 HP MOTOR WIRED AT 230V, DIM: 128"L x 45"W x 80"H, APPROXIMATE WEIGHT: 4,960 LBS., APPROXIMATE 13,269 OPERATING HOURS
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Boy
Model 50A PRO
Machine Type Injection Molding Machine
Country/Region of Manufacture Germany

Directions

Similar products from IBM Processing

Netstal SPIO PRINT VOLL SPIO 110.240.7778e

Netstal SPIO PRINT VOLL SPIO 110.240.7778e

  • Fitchburg, Massachusetts, United States
  • Aug 5th
100 TON 5 OZ ENGEL ES330-100TL TIE BARELESS INJECTION MOLDG MACHINE MFG 1997

100 TON 5 OZ ENGEL ES330-100TL TIE BARELESS INJECTION MOLDG MACHINE MFG 1997

  • Cypress, CA, United States
  • Aug 5th
DME DSS-15-02 Injection Molding Smart Series Controller Control Module

DME DSS-15-02 Injection Molding Smart Series Controller Control Module

  • Nashville, Tennessee, United States
  • Aug 5th
Amplifier card, Rexroth No. VT5041-21/1-0V, Dr. Boy used spare parts

Amplifier card, Rexroth No. VT5041-21/1-0V, Dr. Boy used spare parts

  • Pegnitz, Germany
  • Aug 4th
Control card, Part No. 9626468, RK 100, Boy-Code A1E, Dr. Boy spares

Control card, Part No. 9626468, RK 100, Boy-Code A1E, Dr. Boy spares

  • Pegnitz, Germany
  • Aug 4th
Vickers/Eaton EHST-3-FVF-40 Proportional Pressure Control Valve

Vickers/Eaton EHST-3-FVF-40 Proportional Pressure Control Valve

  • Norwalk, Ohio, United States
  • Aug 4th
markem smartlase 110 serial #068923

markem smartlase 110 serial #068923

  • Harrison, Ohio, United States
  • Aug 4th
Canada Heater Band SHB-344824-600 600 Watt 240V 2”ID 3” High

Canada Heater Band SHB-344824-600 600 Watt 240V 2”ID 3” High

  • Westminster, Massachusetts, United States
  • Aug 4th
Beaumont SRC Multi-Axis Adjustable Injection Molding Insert (PN 1MXI-078-078)

Beaumont SRC Multi-Axis Adjustable Injection Molding Insert (PN 1MXI-078-078)

  • Athens, Georgia, United States
  • Aug 4th
Beaumont iMARC Single-Axis Adjustable Injection Molding Insert IMARC-1FV-125-094

Beaumont iMARC Single-Axis Adjustable Injection Molding Insert IMARC-1FV-125-094

  • Athens, Georgia, United States
  • Aug 4th
Beaumont iMARC Multi-Axis Injection Molding Insert 1MXR-20B-1065-A

Beaumont iMARC Multi-Axis Injection Molding Insert 1MXR-20B-1065-A

  • Athens, Georgia, United States
  • Aug 4th
Beaumont SRC Multi-Axis Adjustable Injection Molding Insert 1MXI-078-078

Beaumont SRC Multi-Axis Adjustable Injection Molding Insert 1MXI-078-078

  • Athens, Georgia, United States
  • Aug 4th
Beaumont iMARC Multi-Axis Adjustable Injection Molding Insert 1MXR-20A-1070-A

Beaumont iMARC Multi-Axis Adjustable Injection Molding Insert 1MXR-20A-1070-A

  • Athens, Georgia, United States
  • Aug 4th
NEW 15 ton Air Cooled Glycol Chiller N American Made OUTDOOR 25F Dual Compressor

NEW 15 ton Air Cooled Glycol Chiller N American Made OUTDOOR 25F Dual Compressor

  • Clinton, Massachusetts, United States
  • Aug 4th
Progressive Components Stainless Steel Support Pillar 2 x 6 LP200L6

Progressive Components Stainless Steel Support Pillar 2 x 6 LP200L6

  • North Salt Lake, Utah, United States
  • Aug 4th
Mitsubishi 500MJ 500 Ton Injection Molding Machine 60oz Shot Capacity

Mitsubishi 500MJ 500 Ton Injection Molding Machine 60oz Shot Capacity

  • Scottsburg, Indiana, United States
  • Aug 4th
tatoko 8 x 40mm 100W Cartridge Heater Electric Heating Pipe Fittings AC110V,...

tatoko 8 x 40mm 100W Cartridge Heater Electric Heating Pipe Fittings AC110V,...

  • US, United States
  • Aug 3rd
2PCS AC 220V 300W for Mould 6mm x 200mm Heating Element Cartridge Heater Electri

2PCS AC 220V 300W for Mould 6mm x 200mm Heating Element Cartridge Heater Electri

  • Guangzhou, China
  • Aug 3rd
220V 160W 50mm Inner Dia x 35mm Injection Machine Heating Heater Band w 2 Leads

220V 160W 50mm Inner Dia x 35mm Injection Machine Heating Heater Band w 2 Leads

  • Guangzhou, China
  • Aug 3rd
110V 380W 35x35mm Injection Mold for Injection Molding Heater Heating Element

110V 380W 35x35mm Injection Mold for Injection Molding Heater Heating Element

  • HK, China
  • Aug 3rd

People who viewed this item also vieved

1.75 mm Filament for 3D Printer ABS SILVER for Repraper, Reprap, MakerBot

1.75 mm Filament for 3D Printer ABS SILVER for Repraper, Reprap, MakerBot

  • North Palm Beach, Florida, United States
  • Jan 30th
Do it Yourself Delta Robot 3D Printer >> 3D Solidworks Plans

Do it Yourself Delta Robot 3D Printer >> 3D Solidworks Plans

  • Santa Teresita, Buenos Aires, Argentina
  • Jan 30th
Hopper Receiver Side Inlet: 1 1/8", Bottom Outlet: 2" #59565

Hopper Receiver Side Inlet: 1 1/8", Bottom Outlet: 2" #59565

  • Holly, Michigan, United States
  • Jan 30th
10pcs 3D Printer RepRap J-Head hot end Heater Cartridge Printer Accessories

10pcs 3D Printer RepRap J-Head hot end Heater Cartridge Printer Accessories

  • NANJING, China
  • Jan 30th
1.75 mm Filament for 3D Printer ABS YELLOW for Repraper, Reprap, MakerBot

1.75 mm Filament for 3D Printer ABS YELLOW for Repraper, Reprap, MakerBot

  • North Palm Beach, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies