US $34.14
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Material | Carbide |
Cutting Diameter | 1mm | ||
Coating | AlTiN/TiAIN | ||
Country/Region of Manufacture | China | ||
End Type | Flat | ||
Flute Length | 3mm | ||
Model | HRC55 Series | ||
Center Cutting | Yes | ||
Flutes | 4-Flute | ||
MPN | N/a |
Directions
Similar products from End Mills Router & Drill Bits
Hertel - 1/2" X 3" OAL 60 DEG HSS 4 FLUTE DE COUNTERSINK (L203)
10pcs TiN coating PCB cutters engraving cnc router bits 1.0mm free shipping
2MM (R1) X 50MM 2-FLUTE HRC45 CUTTING AlTiN/TiAIN CARBIDE BALL ENDMILL 5x
Grab Bag 4 Piece Lot- Browne Sharpe Large 1"+ HSS End Mills ALL 2-Flute.
3 niagara 9/32x5/16x3/4x2-1/2, TiALN coated 2 flute carbide end mills
3 niagara 7/32x1/4x7/16x2, uncoated 4 flute carbide end mills
3 niagara 5/32x3/16x1/2x2, uncoated 4 flute carbide end mills
3 niagara 3/32x1/8x3/16x1-1/2, TiALN coated 4 flute end mills
Hertel 40023 - 3/4" X 4" OAL 90 DEG HSS 4 FLUTE DE COUNTERSINK (L202)
Greenfield Putnam 3/8"X3/8" HS Lead 1.563 2 Flute, End Mill AP-77 NEW
new solid carbide ball endmill.26 mm.(1.023) 3 flute.3" loc.
2 new welden 90 degree countersinks. coated..500 to 1.468
4 new mastercut tool solid carbide 3/4 " end mills.4 flute.coated.
6 new 1/4" solid carbide end mills.2 flute--3 flute & 4 flute.
3 new fullerton solid carbide .906 end mills.4 flute.1" shank.
4 new atrax solid carbide end mills.2 flute.2 @ 1/4" & 2 @ 5/16".double ended.
2 new international minicut solid carbide 1" endmills .2 flute.left hand cut.
2 new solid carbide 5/16" endmills.1 rougher & 1 finish.4 flute.coated
2 new solid carbide roughing end mills.1 @ 5/16" & 1 @ 3/8".4 flute.coated.
People who viewed this item also vieved
Valenite Cut Off Inserts VIPV 3.00 0.20 SV231 New
CPMT 21.52 LF KC935 (*NEW*) 10 Kennametal Carbide Inserts
3/8'' x 2'' Cutting Depth HSS 3/4'' Weldon Shank Drill in Strong Box, #SP10-0038
H.S.S. Annular Cutter 1-7/16'' x 3'' Cutting Depth, #2083-2028
Reamers #2, #5, And Two #6s High Speed USA See Pictures Machinist's Lot
Wood ? Metal ? Rasps ? See Pictures Machinist's Lot
28 Piece Transfer Punch Set 3/32"-1/2" 64ths & 17/32" Dia. USA
NEW KENNAMETAL CNGA643T K090 CERAMIC INSERTABLE INSERTS QTY 5 INSERTS
NEW KENNAMETAL CNGA643T KY3000 CERAMIC INSERTABLE INSERTS QTY 5 INSERTS
HHIP 2006-1210 Steel B Collared Keyway Bushing, 3/4"
1/4, 5/16 and 3/8 KEYWAY BROACHES WITH ASSORTED BUSHINGS
MICRO 100 AR-6 Carbide Tipped Tool bit Lathe Bit 3/8" Shank NEW
1/2" Square Shank Carbide Tipped Right Hand Turning Tool Bit Micro-100 USA #AR-8
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies