1pcs Easy Driver Shield Stepping Stepper Motor Driver Board V44 A3967 For New

US $9.18

Guangzhou, China
Aug 17th

Open on mobile:
QR code

1pcs Easy Driver Shield stepping Stepper Motor Driver board V44 A3967 For new Brand Name:vanxy Origin:CN(Origin) Condition:New Type:Other Type:null Application:Other Application:null Unit Type:piece Package Weight:0.016kg (0.04lb.) Package Size:5cm x 5cm x 1cm (1.97in x 1.97in x 0.39in) Other electronic components directory Electronic component Electronic component kit package Module board PCB Integrated circuit Optocoupler 74-Series microcontroller Other Diode SMD DO-41 DO-35 LED diode Bridge Rectifiers Other Resistor 0603 SMD 0805 SMD 1206 SMD 2512 SMD DIP resistor Network Resistor Other Transistor IR MOSFET Voltage regulator(78 79) (MOSFET) field-effect tube TO-92 Transistor SMD Transistor Other Capacitor 0603 SMD 0805 SMD 1206 SMD Electrolytic capacitor Tantalum capacitor Monolithic capacitor CBB Adjustable capacitor 275AVC X2 capacitor Other Other electronics Crystal oscillator IC socket Potentiometer The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you\'ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min/max adjustment. MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) Compatible with 4, 6, and 8 wire stepper motors of any voltage Adjustable current control from 150mA/phase to 750mA/phase Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds This is the newest version of EasyDriver V4 co-designed withBrian Schmalz. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control. Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC. Specifications: Main color:Red Board size:47 x 20mm Pin header size:51 x11mm PLEASE NOTE: Our stock on eBay limited due to the way eBay works. However: If you need larger stock, please send us a message or visit our store. If you need very large stock (5 or more), please ask for offer, usually able to apply a extra discounts becouse of cheaper shipping costs.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Undisclosed
MPN	Does not apply