1w Blue Laser Diode To-18 5.6mm 445nm (a)

US $5600

  • Varna, Bulgaria
  • Nov 7th
This LD is very electrostatic sensitive. Don't buy these LD, if you have no special tools and skills. This laser diode emit high intensity visible light which can be hazardous to the human eye. Only for Professionals ! Color output Typ.: Blue - 445nm Continuous optical output power: 1W Operating current Typ.: 1.0A Operating voltage Typ.: 4.2 - 4.8V Efficiency approx.: 1 A/W Small package: TO-18 / Ф5.6mm Live Time min.: 20 000 h Without a cooling system: overheat and destroy to 5S after power on. Rear side used for cooling, recommended 2mm thickness copper plate with triangle hole for pins. This laser diode needs Driver - NOT included For focusing requires 445nm three Layer coated glass focusing lens - NOT included Attention: The following practices should be followed to minimize damage to static sensitive devices. 1. Discharge personal static before handling devices. Use grounding wrist strap. 2. After removed from anti static packing. Handle laser diode by the body. 3. Do not slide laser diode over any surface. 4. Only grounded tip soldering irons should be used. 5. Connect to ground Soldering Wire with Rosin Core. 6. Shorted both pins after finished. 7. Remove Short after connect to driver. 8. Use quality Constant Current Driver for this LD - accurate Current and Voltage. 9. Direct connect to Standard Power Supply will damage the LD. Note: If you do not follow these, this will damage the laser diode. For this reason Returns will not be accepted for this item. Delivery: Аirmail + Тracking information

Directions

Similar products from Laser Modules

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies