2 12x24" Blank Magnetic Sign Sheets - Blank Car Magnet Signs - 30mil - Usa Made

US $11.00

La Porte, Indiana, United States
Jan 30th

Open on mobile:

Thanks for visiting our listing. This listing is for 2 blank white 12x24" magnetic sheets with rounded corners. The material is manufactured in the USA by Magnum Magnetics. It is a 30 mil (.76 mm) thickness material that is perfect for vehicle magnets. It has a pull rating of 85 pull/lbs per square foot. The blank white sheeting is used to create vehicle magnets, fridge magnets, business card magnets. It is also used to cover up graphics that are installed on vehicles, where homeowner assocations do not allow vehicles parked in driveways with advertising. The sheeting is rated for speeds up to 75 mph. It is not intended for use with inkjet printing. Our flexible magnetic sheeting performs well in adverse weather. Weatherability Magnum® flexible magnetic sheeting performs well in adverse weather (such as rain, sleet and snow), and in temperatures from -15° F to 160° F (-26° C to 71° C). Superior holding power. • Magnum® flexible magnetic sheeting is a thermoplastic, permanent magnetic product. • High-intensity, multi-pole magnetic arrangement. • Superior holding power on most metallic surfaces. • Standard magnetization on the non-laminated side of the flexible sheeting. Storing Flexible Magnet • When not using flexible magnetic sheet, keep it in a clean, dry place. • Store rolled stock on end to keep it from developing flat spots. • Store rolled sign material on end with the printed or vinyl side out. • Stack flat magnet on a level surface. Avoid placing objects (such as cartons) on top that could damage the face; do not stack with magnetic sides facing each other. Preparing Magnetic-Receptive Surfaces •Before affixing magnetic sheet to a metal surface, be sure all surface paints, clear coats and waxes are cured (hardened).* • Clean the metallic surface and the magnet with mild detergent. • Wipe with a soft cloth or allow to dry. *(Approximate curing times: paint—90 days; clear coat—60 days; wax—2 days.) Applying Flexible Magnet • Before applying, test all inks and paints used on the magnet for adhesion and solvent compatibility. • Affix to smooth, flat or gently curved metallic surfaces. • Make sure the entire magnet is flat against the metal surface. Do not place over protrusions (molding, decals, pin striping, etc.) or concave areas. There must be NO air pockets. • The magnet itself should be at a room temperature of 60°F (16°C) or above when installed to achieve best results. • Do not apply magnet that has been curled with the magnet side out. The magnet may not attach properly to the metallic surface resulting in lifted corners or air gaps which will weaken i ts holding strength. Follow instructions for Storing Flexible Magnet. • If you place the magnet in the wrong position, completely remove the magnet from the surface and reaffix. Lift at sides and not at corners to remove. Do not pull the magnet across the surface, or it may stretch due to the resistance caused by the high magnetic strength. • Do NOT use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods), temperatures exceeding 160?F (71?C) or temperatures below -15?F (-26?C). Exposure to cold weather will make the magnet more brittle so use caution when handling. • Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven fading of the surface because the magnet-covered area is shielded from ultraviolet rays. • Do NOT use on non-metallic body fillers, simulated wood grain siding and repainted surfaces. NOTE: Doors and panels on some vehicles are not made of steel. This product will not work on aluminum and plastic surfaces. • We recommend rounded corners for magnetic vehicle signage. Cleaning Flexible Magnet • To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals. Clean both the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean DAILY.) • After waxing and polishing, allow 2 days for wax to cure before applying magnets. Almacenamiento de los imanes flexibles • Cuando las hojas magneticas flexibles no esten en uso, mantengalas en un lugar limpio y seco. • Almacene el material enrollado sobre un extremo, para evitar que se formen zonas planas. • Almacene el material para letreros enrollado sobre un extremo, con el lado impreso o el del vinilo hacia afuera. • Apile los imanes planos sobre una superficie nivelada. Evite colocar objetos (como cajas) encima, ya que podrian danar el frente; no los apile con los lados magneticos enfrentados entre si. Preparacion de las superficies magneticamente receptivas • Antes de fijar una hoja magnetica a una superficie metalica, asegurese de que todas las pinturas, recubrimientos transparentes o ceras que tenga la superficie hayan curado (endurecido).* • Limpie la superficie metalica y el iman con un detergente suave. • Frote con un pano suave y deje secar. *(Tiempos de curado aproximados: pintura 90 dias, recubrimiento transparente 60 dias, cera 2 dias). Aplicacion de los imanes flexibles • No aplique un iman que se haya curvado con el lado magnetico hacia afuera. El iman puede no fijarse correctamente a la superficie metalica, lo que dara como resultado esquinas levantadas o intersticios con aire, que debilitaran su fuerza de sujecion. Siga las instrucciones indicadas en ‘Alma cenamiento de los imanes flexibles’. • Si coloca el iman en una posicion incorrecta, quitelo por completo de la superficie y vuelva a fijarlo. Para quitarlo, levantelo de los lados y no de las esquinas. No tire del iman a traves de su superficie, ya que puede estirarse debido a la resistencia que causa la alta fuerza magnetica. • NO utilice el iman sobre superficies metalicas horizontales expuestas a la luz solar directa (como capos de autos), temperaturas mayores de 71 ?C (160 ?F) o temperaturas menores de -26 ?C (-15 ?F). La exposicion al clima frio hara el iman mas quebradizo, por lo que debe manejarselo con cuidado. • Tenga en cuenta que el uso a largo plazo sobre superficies expuestas con frecuencia a la luz solar (como los vehiculos) puede ocasionar una decoloracion despareja de la superficie, porque el area cubierta por el iman esta blindada contra los rayos ultravioletas. • NO utilice el iman sobre rellenadores de carroceria no metalicos, revestimientos que simulan la veta de madera, o superficies repintadas. NOTA: las puertas y paneles de algunos vehiculos no son de acero. Este producto no funcionara sobre superficies de aluminio o plastico. • Para la senalizacion magnetica de vehiculos recomendamos esquinas redondeadas. Limpieza de los imanes flexibles • Como proteccion contra la acumulacion de humedad y de suciedad entre el iman y la superficie metalica (particularmente en aplicaciones en exteriores), quite el iman a intervalos regulares. Limpie el iman y la superficie metalica con un detergente suave; frote con un pano suave o deje secar al aire. (Para letreros montados en vehiculos, quite y limpie DIARIAMENTE). • Despues de encerar y lustrar, espere 2 dias a que la cera cure antes de aplicar los imanes. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

blank magnetic sheeting

magnetic sign blanks