US $54.41
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Unbranded |
Instrument Type | Gage Block | ||
MPN | 679329 | ||
Block Material | Hardened Ground Steel | ||
Block Type | V Block | ||
UPC | Does not apply |
Directions
Similar products from Supporting Blocks & Sets
Set 2- 568 Series V-Block and Clamp by Starrett
ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8in x 6in – Straightedge Ba
Findmall (2) Triangle Precision Angle Block Set of Angle Block Machinist #495
LOT OF 3 ZIP 4-SIDED CAST IRON MULTI STEP BLOCKS 3" TALL
Inspection Bench Block Matches Perfectly To Starrett No.129
Pair L.S.Starrett Co. No. 278 Machinist Toolmaker V Blocks with Clamps
PAIR OF ZIP 4-SIDED CAST IRON MULTI STEP BLOCKS 8" TALL 7" X 8-1/4" BASE
HIGH QUANLITY 2-3/8 x 2-3/8 x 2" ULTRA PRECISION V-BLOCK & CLAMP SET
2-3/8 x 2-3/8 1-3/16 Capacity V-Block V blocks Clamp hardened Pair Set .0002"
1 Set Multi-use Gauge Gage Machinist Tool 2-3/8 x 2-3/8 x 2 Inch V Block & Clamp
Used Machinist Precision Work Set Up Steel Holding Block
SUBURBAN VB-688-MCI Matched Pair Of 6"x8"x8" Cast Iron V
Very Nice Starrett 1-1/4" V-Blocks and Clamp No.271C with Original Box EDP 51295
USA 40103 Steel Step Blocks Set Up Hold Down Machinists Tooling
USA 40102 Steel Step Blocks Set Up Hold Down Machinists Tooling
HHIP 3900-3002 1/8 x 4" 10 Pair Precision Parallel Set
TAFT-PEIRCE 9131-M Precision Pair Of 2-3/4"x2-3/8"x1-7/
Steel V Block 1 1/2" X 1 1/2" X 2" With Sets Of Clamp Hardened & Ground ACTOOLS
People who viewed this item also vieved
MT1 MK1 MORSE TAPER #1 LIVE REVOLVING CENTER CNC LATHE TURNING WORKHOLDING #A95
MT2 LIVE CENTER - 7 REPLACEABLE TIPS LATHE TOOL & WORKHOLDING TURNING #G5302
MT2 MORSE TAPER #2 HALF NOTCH CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A94
Jacobs Spindle Nose Rubber Flex Lathe Chuck Model No. 91-T00 Serial No. 80-27
Hardinge Sjogren 5C Speed Chuck L0 Mount
Hardinge SJ6-2 Soft Chuck Jaws 6" Tongue & Groove (2 pieces)
52 Pc. Te-Co 1/2" x 3/8-16(Stud) Workholding Machinist Clamp Kit for CNC Mill
Te-Co 5/8" (Table T-Slot) x 1/2-13 (Stud) Steel Super Clamp Workholding Kit
BIG WILTON 410 C CLAMP SCHILLER PARK ILL USA HEAVY DUTY INDUSTRIAL TOOL 10" MAX
Kennametal LNSER32M Collet Chuck NUT Machinist Tool
Erickson Quick Change Collet Chuck Nut NPA100 NEW Machinist Tool
Kennametal LNSER25M COllet Chuck NUT NEW Machinist Tool
Lot of 10 Schaublin W20 W-20 Collets Lathe Metric 0.7 -144
Qty of Two New Duro Dyne FH-4 Shur-Grip File Handles, Screw on Handle
New Hardinge No.22 Collet, 5/8" Hex Grip
MACHINIST LATHE MILL Large 8 1/2" Lathe Face Plate 1 1/2" Bore for South Bend
Angle Plate 4 1/4 x 3 1/2 x 2 5/8
Eclipse Adaptor Plate Model# APS - 612
T&O Clamping Nut - SIZE: ER-32 Spanner
Armstrong 2 Ton Screw Jacks - Low Profile Swivel Saddle (Inv.31946)
Micrometer Setting Center Gage for CJ Winter Thread Roll 160061 F
WALTER RTS-800 31" POWER TILTING ROTARY TABLE. PRISTINE!
Troyke BL 18 milling machine rotary table
See it work Video- SMW RT-3J 4th Axis Rotary Table CNC Indexer no controller
4" Jaw Bench Vise With Swivel Base Polish Made HI-TEST NO327
Vtg MORGAN No.140 4" Swivel Base Bench Vise Powder Coated Gray
Machinist Precision Vise - 6-1/4" X 2.5" Opens to 2-1/2" Vintage Made In USA!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies