(2) 3M Scotch-Seal™ 2084 Aluminum Metal Sealer 64 ounces total, US $50.01 – Picture 0

(2) 3M Scotch-Seal™ 2084 Aluminum Metal Sealer 64 ounces total, US $50.01 – Picture 1

(2) 3M Scotch-Seal™ 2084 Aluminum Metal Sealer 64 ounces total, US $50.01 – Picture 2

(2) 3m Scotch-seal™ 2084 Aluminum Metal Sealer 64 Ounces Total

US $50.01

Fayetteville, Arkansas, United States
Jan 29th

Open on mobile:
QR code

MAKE AN OFFER LETS MAKE A DEAL ........................................................................................ (2) cans of 3M Scotch-SealTM Metal Sealant 2084 is a one-part aluminum colored sealant which air dries to a tough, flexible film that resists water, oils and fuel. • Retains sealing properties after extended aging. • Can be used to bond and seal aluminum to glass; also adheres well to many other metals and woods. • Metal sealant 2084, conforms to requirements of AAMA Specification 801.1 (Architectural Aluminum Manufacturers Association Specification title “Adhesive Type Sealant for Joints of Applied or Integral Fin.”) Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Color: Aluminum Viscosity: (approx.) Brookfield Viscometer: 7,000 - 22,50 cps RVF #6 sp. @ 20 rpm @ 80°F (26.7°C) Solids Content: (by wt.) (approx.) 40 - 47% Net Wt.: (approx.) 7.7 - 8.1 lbs./gal. Flash Point: (c.c) 0°F (-18°C) Coverage: (1/8" diam. wet bead) 1500 lineal ft./gal. Solvent: Acetone Tack Free Time: (approx.) 5 minutes Dry Time: (approx.) 24 hours Gap Filling Capability: 1/16 inch Adhesion, Canvas to aluminum 180° peel, pulled at 2"/minute: Note: Appropriate application equipment can enhance adhesive performance. We suggest the following application equipment for the user’s evaluation in light of the user’s particular purpose and method of application. Pump – 9 to 1 ratio double acting ball check type pump, 11.0 cu. inch per cycle with 41/4" air motor with single wiper follower plate. Packings, hoses and pail wiper must be compatible with acetone. Hose – Nylon lined, 500 psi working pressure. Reference Information Material Temperature – 58°F (14°C) Directions for use: Surface Preparation: Best results are obtained on clean, dry surface. Oil, grease and other contaminants may be removed by wiping with a solvent such as 3MTM Scotch- GripTM Solvent No. 3.* Application: Production dispensing is best achieved with pressure-flow equipment. Hand caulking guns may also be used. Cleanup: Equipment and excess sealer may be cleaned with solvent such as Scotch-Grip Solvent No. 3 or methyl ethyl ketone.* *Note: When using solvents for clean-up, extinguish all ignition sources and follow manufacturer’s precautions and directions for use when handling such materials. Storage: For optimum storage 3MTM Scotch-SealTM Metal Sealant 2084 should be stored at 60-80°F (15-26°C). Higher temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. Rotate stock on a “first in-first out” basis. Shelf Life: When stored at recommended temperature in original, unopened containter, this product has a shelf life of 15 months from the date 3M ships the product. USA SHIPPING ONLY 25 lbs./inch width